Contains two resin miniatures. Supplied unpainted. Some assembly may be required.

Contains six resin miniatures. Supplied unpainted. Some assembly may be required.

Contains three resin miniatures. Supplied unpainted. Some assembly may be required.

Contains one resin miniature. Supplied unpainted. Some assembly may be required.

Contains one resin miniature. Supplied unpainted. Some assembly may be required.

Patient 42 was a notorious serial killer, infamous for savagely biting out his 
victims’ throats. Captured on San Servolo near the Ospedale, he became 
the subject of horrific experiments. His arms were replaced with steel claws, 
and a madness-energy pack was grafted to his back, feeding tubes into his 
brain and muscles for control. When activated, his body swells with  
unnatural strength, insensate to mortal pain.

Now weaponised by the Ospedale, Patient 42 is kept in a cage, bound in a 
straitjacket and muzzle, his eyes burning with berserk fury. When  
unleashed, he tears through targets with feral brutality. Afterward,  
attendants inject madness energy to stun him, restrain him again, and 
wheel him back to the asylum, ready for the next act of barbarism.

This set contains Patient 42, one of Venice's most vicious serial killers. Through the Doctor's treatment, he has become even more savage and vile than ever before. 

Contains 1 resin miniature and 1 plastic base. Cobblestone base pictured not included.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

The Eater of Sin is a Vatican priest who offers salvation through destruction. 
He devours sinners’ souls, keeping only the most damaged fragments 
stitched into the living necklace at his throat while the rest are ground into 
holy ash, erased from existence. 
Empowered by the souls he consumes, he is surrounded by a spectral haze 
that attacks nearby foes or can be condensed into devastating blasts at 
the cost of his strength. He wanders constantly, harvesting new souls and 
leaving charred husks behind. 
In places heavy with sin, he can burn all his collected souls in a purifying 
inferno, using sinners to punish sinners. His mask, shaped after the  
screaming faces of the damned, gives him the aspect of a Grim Reaper.

This set contains The Eater of Sin, a powerful priest who gathers the souls of sinners and uses them to further the Vatican's cause. A unique supporting character, those caught in his path are compelled to confess their sins. 

Contains 1 resin miniature and 1 plastic base. Cobblestone base pictured not included.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

Known as The Melter, this lone Bioficer vessel earned its name by ambushing larger foes that underestimated its small frame. Its unique configuration led the Admiralty to label its aggressive, unsubtle Intelligence, Anode whose technology exceeded that of its peers.

Refitted to heavy‑destroyer mass with an enhanced power matrix, the ship exists solely to wield a single prow weapon, the Themator Cage, a short‑range system capable of battleship‑level damage. This limitation allowed the UCMS Gaugamela to destroy it over Olympus in early 2679. But identical sightings soon followed, forcing the  Admiralty to conclude that Anode had escaped its vessel and now likely commands multiple copies of this rare and dangerous design.

This set includes:

• 1 Ship
• 1 Base with flight stand

Miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Other ships and gaming mats are for scale purposes only. Clear acrylic bases will require super glue and may have a protective blue film on one side that will need removing.

Among the latest ships to emerge from the Grand Fleet's shipyards are an advanced line of battlecruisers based on an evolved superstructure. With the same combination of speed and lethality, this supports all existing classes in addition to a range of new variants, offering PHR admirals many fresh tactical options. 

This new hull can also be configured as light Supercruisers or enlarged Pocket Battleships with an enhanced degree of tactical utility. Rumour has it, these are so modular as to be convertible to a different class in mere days - an advancement the UCM can only marvel at. 

Most notably, many of these incorporate a cavernous prow launch bay. These carry a single, massive structure which can self-deploy to the surface. Multiple varieties provide anti-orbital fire support and potent electronic warfare capabilities. 

This box includes:

• 2 Plastic Battlecruisers
• 2 Dropfleet bases

Miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Other ships and gaming mats are for scale purposes only. Clear acrylic bases will require super glue and may have a protective blue film on one side that will need removing.

PHR Tribulous-class Mines are used sparingly and tactically by the Grand Fleet, in contrast to the indiscriminate, strategic uses of most other forces. If undetonated, they are typically recalled to their ships rather than leaving these critical technologies for potential capture and study. These advanced, autonomous munitions include superior targeting systems and an ultra-dense, alloy-wrapped core of energy-rich explosives capable of piercing the heaviest armour with extreme ease.
This set includes:

• 6 bases of 5 PHR mines

Base size is 20mm x 20mm

Miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly. 

Launch assets (fighters, bombers and torpedoes) are important elements in games of Dropfleet Commander - both for protecting your ships and annihilating your opponents!

These greatly add to the look and feel of your fleet and are now available with unique designs for each faction. This set of Launch Assets is intended for Bioficer players.

This set includes:

• 3 bases of 3 Bombers
• 4 bases of 5 Fighters
• 1 base of Torpedo

Base size is 20mm x 20mm

Miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly. 

Launch assets (fighters, bombers and torpedoes) are important elements in games of Dropfleet Commander - both for protecting your ships and annihilating your opponents!

These greatly add to the look and feel of your fleet and are now available with unique designs for each faction. This set of Launch Assets is intended for PHR players.

This set includes:

• 3 bases of 3 Bombers
• 4 bases of 5 Fighters
• 1 base of Torpedo

Base size is 20mm x 20mm

Miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly. 

Launch assets (fighters, bombers and torpedoes) are important elements in games of Dropfleet Commander - both for protecting your ships and annihilating your opponents!

These greatly add to the look and feel of your fleet and are now available with unique designs for each faction. This set of Launch Assets is intended for Resistance players.

This set includes:

• 3 bases of 3 Bombers
• 4 bases of 5 Fighters
• 1 base of Torpedo

Base size is 20mm x 20mm

Miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly.

Launch assets (fighters, bombers and torpedoes) are important elements in games of Dropfleet Commander - both for protecting your ships and annihilating your opponents!

These greatly add to the look and feel of your fleet and are now available with unique designs for each faction. This set of Launch Assets is intended for Scourge players.

This set includes:

• 3 bases of 3 Bombers
• 4 bases of 5 Fighters
• 1 base of Torpedo

Base size is 20mm x 20mm

Miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly. 

Launch assets (fighters, bombers and torpedoes) are important elements in games of Dropfleet Commander - both for protecting your ships and annihilating your opponents!

These greatly add to the look and feel of your fleet and are now available with unique designs for each faction. This set of Launch Assets is intended for Shaltari players.

This set includes:

• 3 bases of 3 Bombers
• 3 bases of 5 Fighters
• 1 base of Torpedo

Base size is 20mm x 20mm

Miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly. 

Launch assets (fighters, bombers and torpedoes) are important elements in games of Dropfleet Commander - both for protecting your ships and annihilating your opponents!

These greatly add to the look and feel of your fleet and are now available with unique designs for each faction. This set of Launch Assets is intended for UCM players.

This set includes:

• 3 bases of 3 Bombers
• 4 bases of 5 Fighters
• 1 base of Torpedo

Base size is 20mm x 20mm

Miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly. 

Once, the Crown ruled the world. But the power of Her Majesty is slowly dwindling as Her realm begins to fracture and fade. Yet, the Crown endures. And this is no more evident than in the heaviest regiments they bring to the field of battle.

In this Armoured Clash Regiment box, you will find heavy support options for your Crown force. Unflappable Royal Engineer Artificers erect battlefield fortifications such as the Roxburgh Firebase which anchor the battlelines even as bullets fly. Their comrades in the Royal Engineer Dragoons prove just as adept at battlefield repairs as they are at wrecking the vehicles of their enemies. Finally, rumbling towards the frontlines on mammoth tracks, super-heavy tanks like the Challenger or Conqueror sweep all before them with massive frontal armour and an array of devastating weaponry.
Armoured Clash is a 10mm scale tabletop wargame that uses highly detailed miniatures to represent ranks of infantry, squadrons of armoured vehicles, and huge fighting machines known as Behemoths. Pick your Faction, and fight for dominance in wars waged across this alternate late-Nineteenth Century, and determine the future of the Dystopian Age!

Contents:

• 4x Royal Engineer Artificers
• 4x Royal Engineer Dragoons
• 1x Challenger Super-Heavy Assault Tank (may also be built as a Conqueror Super-Heavy Battle Tank or a Camlan Super-Heavy Transport)
• 1x Roxburgh Firebase (may be built as a Corfe Bastion)
• 2x Barricades

Please Note:

• Miniatures are supplied unpainted, and some assembly may be required.
• Printed materials are supplied in English.

A Supercharged 1 player starter ready to play a game of First Blood or The Last Argument of Kings, with 29 miniatures, a Quick Start and Welcome Guide to get you playing both games, all needed Command Cards, Bases and Stands, assembly manuals, a Conquest EA Paper Map, 12 16mm dice, 2 D Terrain, a Measuring Tool and more....

A Supercharged 1 player starter ready to play a game of First Blood or The Last Argument of Kings, with 31 Weaver Court miniatures, a Quick Start and Welcome Guide, all needed Command Cards, Bases and Stands, assembly manuals, a Conquest EA Paper Map, 12 16mm dice, 2 D Terrain, a Measuring Tool and more....

An exquisite new look for the Weaver Court faction numbered to 1099 piece edition, this Founder's Exclusive comes with a Certificate of Authenticity, monster and infantry bases and stand and the Gemred Knight Command Card.