The idyllic hamlet of Bumbleton is a sleepy and peaceful place, that is until something a lot more valuable than turnips is spotted growing in the fields!

This set will contain 14 pieces of finely cast resin. Supplied unpainted.

Near the centre of the Isle is the Forsaken Forest, a strange place packed with scurrying critters, enormous mushrooms and even some talking trees.

This set will contain 15 pieces of finely cast resin. Supplied unpainted.

Machburg is the bustling capital of Tauber and its markets are second to none. As the merchants set up shop bright and early, is that the faint blue glow of moonstones they see peeking up through the cobbled streets?

This set will contain 14 pieces of finely cast resin. Supplied unpainted.

Only Trolls and the most foolhardy adventurer would set foot in the Swamp of Suffering by choice, but if that's where the moonstones are growing then fortune favours the brave. Just watch out - there are creatures lurking below the slime!

This set will contain 22 pieces of finely cast resin. Supplied unpainted.

Designed to work with the Demonship rules written by Malev. This kit is all you'll need to start getting prepped for your games. [NOTE] This is NOT the rules for playing Demonship. Those are found in the Demon Ship starter box.

This kit will include

• 2x 1by3
• 1x 1by2
• 1x 1by1
• 1x 2by2 platform
• 1x switch
• 2x doors
• 2x barrels
• 2x hatches

"The ruined fortress lays before us. Be wary as it may now be home to bandits."

The Frozen Keep is a medium sized kit with space to connect it to the existing castle walls as well as all the other savage domain kits. The height of the keep allows for verticality over other nearby terrain pieces and the walls provide line of sight blocking.

The Keep is made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Platform now silent, the ruined bandstand sounds of music no more."

The Pavilion Bandstand is a small kit designed to be set dressing and add a bit of visual interest on your larger savage domain layouts.

The Bandstand is made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Looks can be deceiving. Though it appears empty, a sorcerer's glamour spell lies over this place, masking its true form."

This Multipart kit can create a modular structure or be used as many individual buildings. Each individual building has a floor design that allows it to be slotted into other buildings with the same floor design. The exterior of the buildings have the same slots to allow connectivity with other savage domain kits.

The Sorcerer's Redoubt is made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Contains 1 Resin Diorama Monster Base and 6 Hunting Pack Miniatures

"Sad state of affairs when the state just expects you to process yourself..."

Cuts have been made everywhere, now the law is in your own hands with this Process Unit. That's right, if you have committed a crime you are actually expected to turn yourself in for processing.

The Process unit is made from 3mm MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"When it says hurry, it really means it. No one pays attention to these signs"

What good is traffic control if no one knows where they're going or when it is safe to cross? Add this accessories kit to your SLAB Streets Junctions to bring life to your game board.

The SLAB Streets Accessories kit is made from 3mm MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"There's no such thing as one size fits all"

Built a sprawling city of SLAB Habs but you need to control traffic flow? Well, these are the barriers for you! Ready to cause general annoyance to everyday travellers and passable cover for desperate situations! 

Contains:

3x Large Barriers
3x Medium Barriers
4x Small Barriers

The SLAB Streets Barriers kit is made from 3mm MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"You can't go straight on, but at least you can turn left now."

Junctions, for when your traffic control needs to be a little more succinct than just "do not pass". 

The SLAB Streets Barriers kit is made from 3mm MDF. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"Seriously where does our tax money go?"

Yes, you really are expected to clean up after yourselves once you've finished "cleanin up the streets". Cartridges in the bins, please. 

The Wastestation is made from 3 MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"Once the job is done, put them in the boat, let them float out to sea where they will never be found again"

An ideal transport for a strigoi, always carrying a light snack.

They also make perfect arenas to duel other Carnevale characters in 1 v 1 combat.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

"It was supposed to be a pentagon, but corners were cut"

The Octo Pod Consortium is a fantastic set for any Sci-Fi tabletop, it is fully modular with the rest of the Octopod kits allowing for the pods to be extended to infinite heights alongside this the Consortium can be set up as a Sci-Fi outpost which can be stacked high or expanded out.
The Octo-pod Consortium kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

This Kit is supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and are not included. The Consortium Features:

• 4 Octopods
• 1 Octopod stairway
• 1 Octopod Square base
• 2 Walkways
• 1 Ladder
• 5 barricades
• 2 Drums
  

"I was just thinking 'how do I get up there?' Now I know."

The Slab Hab Access and Walkways kit is the kit you need for your towering constructions or sprawling buildings in SLAB City. Giving you different access points and alternative walkways, this kit provides multiple layout variations within the SLAB range.

The SLAB Hab range is a super flexible range that can quickly fill up your game table! Stackable and joinable with the walkways and access point kit, you can build towering slums or a sprawling city. The range is quick to build so you can have tournaments and games running in no time.

The SLAB Hab Small kit is made from 3mm MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"So much room for activities"

The large SLAB Hab, is a show of force. Whilst you may want to show your entire army off on the spacious roof, it's not recommended. Featuring secure walkways, stairways, and rooftop barricades. The large Hab is a spacious building, capable of holding a large army and is a great building block for stacking other Hab Buildings onto it.

The SLAB Hab range is a super flexible range that can quickly fill up your game table! Stackable and joinable with the walkways and access point kit, you can build towering slums or a sprawling city. The range is quick to build so you can have tournaments and games running in no time.

The SLAB Hab Small kit is made from 3mm MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"Time to hunker down and stand our ground"

The medium SLAB Hab is a great stronghold for a dwindling force. Featuring secure walkways, stairways, and rooftop barricades. The medium Hab is the home away from home when you're on the run. 

The SLAB Hab range is a super flexible range that can quickly fill up your game table!  Stackable and joinable with the walkways and access point kit, you can build towering slums or a sprawling city. The range is quick to build so you can have tournaments and games running in no time. 

The SLAB Hab Small kit is made from 3mm MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"In today's economy, this is practically a mansion"

The small SLAB Hab is the ideal extension to your existing buildings within the SLAB Range. Featuring secure walkways, stairways, and rooftop barricades. It's like a small mini fortress. 

The SLAB Hab range is a super flexible range that can quickly fill up your game table!  Stackable and joinable with the walkways and access point kit, you can build towering slums or a sprawling city. The range is quick to build so you can have tournaments and games running in no time. 

The SLAB Hab Small kit is made from 3mm MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.