"Flight pad designation 01A is cleared and available to receive incoming ships."

The Flight pad is a large area terrain piece that provides slight elevation to your board. Tall enough to provide heavy cover to most miniatures, it can also be used in conjunction with the Strike Fighter or any other small ship you may have.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"I saw a shimmering light. My head grew heavy and my sight grew dim.

I had to stop for the night"

Much like the Hotel California, The Haunted Funhouse is easy to enter but quite a different story when you want to leave. Three individual levels of chaos, neatly packaged in one terrifying package. With doors and hatches never leading to the same place, you can never really be sure of where you will end up. The best or worst part is the doors and the walls in the maze have a mind of their own and tend to move around.

This kit is made from 3mm MDF and a small challenge to put together. Care must be taken as we have utilized a bendable MDF construction to create the tongue. The ground floor consists of a movable maze and comes with additional wall stabilizers if instead of a maze you want some barriers or line of site blockers. Perfect for 28-32mm tabletop games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"This is Strike Fighter designation 01A... Do I have clearance to land?"

The Strike Fighter is a small vehicle, built to be used in conjunction with the Flight pad. Self supporting with its landing gear and consoles, the Strike Fighter makes great scatter terrain for a hangar board or on the edge of your town board.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Life is like a Ferris wheel. Even when you're down, just remember there's always a way back up". You almost always get off at the bottom... Hopefully..."

The Pier, Vegas, your local fairground with less than sound construction, wherever it may be there is a ferris wheel near you. This iconic fairground/amusement park/tourist attraction is fraught with terror despite its slow-moving nature. There is always the fear of being stuck at the top for longer than you may want to be there and the loss of control or a giant ape climbing up to capture your carriage.

This kit is made from 3mm MDF and a small challenge to put together. Care must be taken as we have utilized a bendable MDF construction to create the carriages. Yes, it rotates, has a ticket booth for the fair goers and is perfect for 28-32mm tabletop games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Close the blast doors!! Soldiers, form up. This is our last line of defence.

The Bunker kit makes for a great objective building on your sci-fi table top. It comes with a fully playable roof section that is removable to allow access to the interior.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Sandstorm Hovel B is a perfect small kit to fill out the housing buildings on your sci-fi town boards. Although it has a smaller footprint than the other sandstorm kits, hovel B is taller to provide more verticality for your models.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The barracks has the capacity to house a hundred men, including weapons and equipment, fighting fit and ready to respond to any local danger.

The Barracks is a large set great for a centrepiece to build a sci-fi base around. The kit includes a removable roof and sliding doors to allow interior playability, as well as ledges and a shallow sloped roof if your units want to capitalise on the high ground!

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Get a sniper team up on those gantries, I want eyes on the enemy! A squad and B squad will circle around and catch them by surprise. Units! Move out!

The Gantries provide a raised firing platform with fortified barriers, giving heavy cover to your advanced units. Containing multiple modular pieces, it can be set up in many ways each time you play, a perfect addition to any sci-fi base layout.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

This is Gold leader... requesting permission to land... Gold two has been clipped... engine failing... clear the deck we are coming in hot...

The Landing Platform is great kit if you need to provide a bit of height to your sci-fi gaming board. A perfect obstacle for any vehicles, setting up the chance of a spectacular crash in game. The base of each tower incorporates a door design if you want to house-rule the ability to use the inbuilt elevator to gain access to the high platform.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Most conflicts are fought and won over battlefield objectives. This battle is no different.

The Objectives set provides you with almost every item needed for an objective based game in your battles in a galaxy far, far away. The kit contains:

• 1 Crashed Pod
• 6 Landmines
• 2 Mine Carts
• 4 Water Gatherers
• 3 Consoles
• 5 Crates
• 6 Supply kits

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Some still say you can hear the fires burn and the hammer swing"

The Farrier's Homestead, a once lively and busy place, known as the one stop shop for those shiny shoes for your favourite horse. Now only shadow of its former self, it is perfect for skirmishes! Keep it close or spread out across your Savage Domain board to create lots of cover and ambush zones. One thing is for sure, it's certainly going to be lively again at the Farrier's homestead.

The Farrier's Homestead is made from 3mm MDF and 1mm greyboard. It is a great scenery kit to use in Fantasy skirmish games, and will work perfectly with 28-35mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and not included.

The residents of Pitchstone have everything they could possibly need; A store to buy traps and a Doctor's office to help you when it goes wrong.

The Pitchstone Quinn Street contains 1 doctor's office, 1 store, 3 large boardwalks, 1 medium boardwalk, 2 small boardwalks, 1 sign, 1 set of crates. The Pitchstone Quinn Street is suitable for competitive and narrative play by providing both line of sight blocking as well as high vantage points, it also has removeable floors allowing for interior play. Whilst providing these competitive features the Pitchstone Quinn Street is ideal for new and experienced hobbyists alike. 

The Pitchstone Quinn Street is made from 3mm MDF. It is a great scenery kit to use in sci-fi skirmish games and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Derricks are dotted about everywhere in Promethean Complexes. Used for moving heavy loads where it might be required and a construct wouldn't be practical, they are also converted to pump jacks on occasion. These ubiquitous sights with their hypnotic, repetitive movements are symbolic of the barely human constructs that seem to act the same, all for the benefit of the Covenant of the Enlightened and their goal of global control.

This set contains:

• 1x Promethean Derrick

• Scenery items are manufactured in Medium Density Fibre Board (MDF).
• Buildings are supplied primed and some assembly will be required.
• Assembly instructions can be found online and by scanning the QR printed on the packaging.

The forges of a Promethean Complex burn night and day to smelt all sorts of raw materials for use in their engineering breakthroughs. It would be impossible to acquire the vast quantities of iron and other metals from outside so ore is brought in from all over the Union and beyond to keep the fires of industry burning. This has the benefit of making it much more difficult for external governments to keep track of all the wonderful and terrible advances made by the Covenant of the Enlightened.

This set contains:

• 1x Promethean Forge

• Scenery items are manufactured in Medium Density Fibre Board (MDF).
• Buildings are supplied primed and some assembly will be required.
• Assembly instructions can be found online and by scanning the QR printed on the packaging.

Often it's easier for a Promethean Complex to just be built over a mine in the first place. If that's not an option then the Enlightened have advanced machinery and indentured servants that allow them to mine otherwise deposits of ore inaccessible to the other great powers. Even mines that aren't fiscally viable are opened given the insatiable hunger the Covenant of the Enlightened have for coal and raw materials.

This set contains:

• 2x Promethean Mine Entrances

• Scenery items are manufactured in Medium Density Fibre Board (MDF).
• Buildings are supplied primed and some assembly will be required.
• Assembly instructions can be found online and by scanning the QR printed on the packaging.

In the Dystopian Age there are all sorts of curious compounds and esoteric elements that need to be refined before they can be used in engineering applications. These refineries are a common site in and around Promethean complexes. Any visitors are repulsed by the toxic fumes given off by these sites and surprised that any workers in the vicinity could get used to such a foul stench.

This set contains:

• 1x Promethean Refinery

• Scenery items are manufactured in Medium Density Fibre Board (MDF).
• Buildings are supplied primed and some assembly will be required.
• Assembly instructions can be found online and by scanning the QR printed on the packaging.

The labyrinthine surroundings of a Promethean Complex are home to all sorts of workshops, storage facilities and industrial buildings. Often the only way to traverse these sites is via walkways added after the fact to make sure engineers and construct-drones can get from point A to point F.35b. Access, rather than safety, is the order of the day so handrails are strictly optional. After all, constructs are replaceable and engineers should know better.

This set contains:

• 1x Promethean Walkways

• Scenery items are manufactured in Medium Density Fibre Board (MDF).
• Buildings are supplied primed and some assembly will be required.
• Assembly instructions can be found online and by scanning the QR printed on the packaging.

The perfect pack to complement and expand the scenery from your Operation: Crimson Stone

This 3mm cardboard scenery pack, two-sided printed, includes an Objective room, two small buildings, a sniper tower, a console, two bridges, two staircases, an inner ladder, an inner walkway and a 24x32 inch paper gaming mat.

The devastating weaponry brought to bear by both alien cultures and human soldiers tears through the pre-fabricated structures of colonised worlds. These ruins become vital as cover as the wars rage on.

This set contains nearly 100 pieces of modular terrain including 48 Connectors, allowing you to construct a range of buildings that will provide plenty of cover for any wargame.

Supplied unassembled and unpainted. Plastic Scenery.

This set contains:

• 3x Ruins Sprue 7.1
• 2x Ruins Sprue 7.2
• 1x Urban Sprue 1
• 1x Connectors

This set contains 152 pieces and allows you to construct a small intact building, suitable for post-apocalyptic or historical games.

It contain modular intact Battlezones scenery tiles and a set of accessories, including stop signs, bins, fences, fuse boxes and other details. You can expand this scenery set using other kits from Mantic’s Battlezones Tile System.

Also compatible with the most popular superhero skirmish game. Terrain Sizes: 1, 3

Models supplied unassembled and unpainted in coloured plastic.

Contents:

• 1x Connectors set
• 2x Set 12 (Building Roofs)
• 1x Set 11 (Building Walls)
• 1x Set 9 (Street Scatter Scenery)