Chapter 8

Tobias had escaped the merchant, and was wandering through a wooded grove. He finished off crunching down the cabbage he'd taken and heard some clanging sounds.

Was is the noise of bread being made? Tobias had literally no idea, but was hopeful! He plodded out of the grove towards the noise and found no bread, but a blacksmith. He didn't really understand how a blacksmith worked, and - if he was honest with himself - didn't really care. He whistled to himself as he strode by noise of hammer meeting anvil, and followed a small stream downriver.

Even Halflings need swords and shields made. And Halflings especially need pots and pans, forks and spoons! That keeps the Halfling Blacksmith a busy place, and a great centrepiece or objective to fight over. The set contains a blacksmith's hut, a covered shed and a furnace.

Chapter 2

After eating ten fried eggs, a flank of ham, two bowls of soup, and a quiche, Tobias was still hungry. That wasn't much of a breakfast. He looked around his pantry and found nothing but crumbs. He needed some toast! He put on his hat and went searching for some bread. Outside of the door he wandered down to the stream and crossed the wooden bridge. The beams creaked beneath his bare feet, giving a slight percussion to the lapping of the water on the stones.

These Halfling Bridges allow your little halflings to move themselves, or their food, from one side of a river or body of water to the other side. the bridge is wide enough for a movement tray full of halfling warriors or carts of Cheeses, meat and other delectables to move over it.

The kit is made from 3mm MDF. It is easy to put together and looks great on the tabletop with other 28-35mm scenery. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

"Collecting the chapters of Tobias Tubthumper!"

Relive Tobias' adventures with the Craggy Bottom Village kit. This kit contains the Halfling Hamlet, Homestead, Barn, Blacksmith, Bridges, Watermill and Windmills.

The Halfling Craggy Bottom Village is made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Chapter 6

Tobias Tubthumper was hungry. He wanted bread for his breakfast, but at this point he'd take anything he could find. His trip to the Windmill had been in vain, but he'd unshackled the goat inside and was trying his best to ride it into town. It buckled and jumped a lot, but he clung on for dear life as it galloped down the road.

Before long they reached the entrance to Deathly Pastures and the goat finally got the better of him. Tobias was thrown clear into the centre of the graveyard, landing with a thud.

He stood up grumbling and looked around. It was clear that something spooky was going on here, and he had no time (or nerve) to face it. The wails whipping past the mausoleums were enough for him to turn tail and run straight out again.

Sooooo spoopy! The Halfling Graveyard is usually the dead centre of a Halfling village. Boom boom! It contains two mausoleums, two fences, a gate, a coffin and a well. It's a great set for detailing your board, or a couple together could make a large graveyard for all your Undead Halflings to enjoy!

The Halfling Graveyard is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Chapter 1

Tobias woke early and yawned. He blinked his eyes open and looked around his modest little house. The Halfling Hamlet of Craggy Bottom was a pleasant place to live, with a few houses and no pesky cockerels to wake him up until the crack of 10.

The Hamlet provides modest homes for your little halflings. Complete with ample pantry space and a large dining area for entertaining. The obligatory round doors face out from the short side of the building giving a long and thin interior living space.

The kit is made from 3mm MDF and 1mm Greyboard. It is easy to put together and looks great on the tabletop with other 28-35mm scenery. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Chapter 5

From the window of her home in Tree Trunk Terrace Margery Thimbletop could see straight out across the rolling fields. She sat on her comfiest cushion, next to the rustic wooden beam and stared out. What she loved about her village was how peaceful it was.

Today however, her cup of tea was interrupted. Birds flew away and the trees rustled as a strange Halfling rushed past her window. He was clinging for dear life onto the back of a goat. Like a flash he was gone, and Margery turned back to her tea.

The Halfling Homestead makes a lovely little grouping of houses for your diminutive chums. The four houses are all uniquely detailed (with round doors of course). They are perfect on their own, or as part of a larger modelling project, like putting them on the side of a hill.

The Halfling Homestead is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Chapter 7

The Halfling drummer Tobias Tubthumper was running full pelt. He'd heard something in the Graveyard, and didn't want any of it. As he fled he was sure that there were shadows in the corners of the tombs that were coming for him. A strange sight, particularly considering the bright, sunny morning outside the walls of the Graveyard.

He was panicking, and there was no point in trying to hide it. He could barely see where he was going - maybe through fear, or maybe through sheer hunger - and smashed right into something.

He flipped over and landed on his back, apples, cabbages and other produce falling everywhere. He'd hit a cart full of goodies! The merchant pulling the cart was understandably angry, and even before he knew what was going on, Tobias was being chased off. He snagged a cabbage on his way and ran.

What Halfling village is complete without plenty of food?

This set contains loads of delicious veggies, as well as a cart to haul them around in. But this merchant doesn't just sell food, as there is hay and even some hand-crafted beehives too.

The set contains one cart, three beehives, and two of everything else (cabbage barrels, apple barrels, cabbage boxes, apple boxes, hay bales, closed crates, and troughs).

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures are for scale only and not included.

Chapter 9

The stream turned out to be more of a brook, Tobias mused. He didn't know much about the difference, but decided that it definitely seemed like a brook. Tobias was pretty clueless about anything that didn't include drumming his favourite tunes. What he did know though was smells.

And he could smell bread.

He sped up into a trot which turned into a run as he saw the watermill in the distance. Skipping across the grass and over the bridge, Tobias rounded on the entrance. He beat on the door before an old Halfling slowly opened it.

"Where's the bread?! I smell it! I want it!" Tobias yelled enthusiastically.

The old Halfling adjusted his glasses and squinted at the excitable figure.

"No bread here, young'un."

"What?! NO! I can smell it!" Tobias was jumping up and down with a mixture of anger and excitement.

Again, the old Halfling took a second to think.

"Ohhhh the smell! I don't even notice it anymore. It's not bread, boy. It's beer. You're welcome to come in and have a drink though."

"Beer?" Tobias was dumbfounded. He'd spent all morning trying to find bread, "Yep, that'll do!"

Halflings drink quite a lot of beer (well, considering their size). You've got to have somewhere to make beer, and it all starts in the Watermill! This massive building (again, considering the size of a Halfling) is decked with lovely detail, and even comes with a bridge to cross the river below.

The kit is made from 3mm MDF. It is easy to put together and looks great on the tabletop with other 28-35mm scenery. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Chapter 4

Tobias crossed Cornwood's farm, seeing that there was nothing there worth having save for a few dozen apples. He finished the last one as he rounded the path to the windmills. Surely there he'd find some bread! Tobias was an excellent drummer, but didn't really know much about the process of making food, thus his enthusiasm. He was slightly taken aback when he entered the grain storage to find nothing but wheat. He was even more surprised upon opening the door to the mill to find a goat milling grain down to flour. He was getting very hungry, and glared at the goat for good measure.

This set contains two large windmills, primary used for milling grain but also to tell if it's windy outside so you can decide to stay in your halfling hamlet next to the fire. Also in this set is the raised grain store, keep your grain high, dry and next to the windmills. No rats can get to it and it speeds up the production of bread, without which sandwiches could not be made.

The kit is made from 3mm MDF and 1mm Greyboard. It is easy to put together and looks great on the tabletop with other 28-35mm scenery. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

The Hunting Lodge is made from 3mm MDF. It is easy to put together and looks great on the tabletop. Great scenery to use with D&D and other 25-28mm games. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

The Malefic Circle is made from 3mm MDF. It is easy to put together and looks great on the tabletop. Great scenery to use with AoS and other 28-35mm wargames. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Is that archway... bleeding? This place is weird.

The Minor Riftgates of Blood are towering edifices to death. They come in a pair, which means they not only look great, but you could dip into one and out of the other. Complete with red acrylic, this kit really adds a little (more) gore to your games.

This kit is made from 3mm MDF and 3mm acrylic. It is a great piece of scenery to use with 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

How do these gates stay standing when they're constantly on fire?

The Minor Riftgates of Fire are towering edifices to the flame. They come in a pair, which means they not only look great, but you could dip into one and out of the other. Complete with orange acrylic, this kit really adds a little heat to your games.

This kit is made from 3mm MDF and 3mm acrylic. It is a great piece of scenery to use with 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Once the gateway opens, the plants won't stop growing...

The Minor Riftgates of Life are towering edifices to the earth. They come in a pair, which means they not only look great, but you could dip into one and out of the other. Complete with green acrylic, this kit really adds a little life to your games.

This kit is made from 3mm MDF and 3mm acrylic. It is a great piece of scenery to use with 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

After thunder comes lightning, and with it, a whole host of storms.

The Minor Riftgates of Storms are towering edifices to the heavens. They come in a pair, which means they not only look great, but you could dip into one and out of the other. Complete with dark blue acrylic, this kit really adds a little spark to your games.

This kit is made from 3mm MDF and 3mm acrylic. It is a great piece of scenery to use with 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

''A cool breeze whips through the open doors of this shrine, for only the dead walk here.''

The Necro Shrine pays provide a place of worship to those who venerate the undead. with various deathly details it is a perfect kit for any undead desert boards Tall and squared based it can be used in a variety of ways. This kit is made from 3mm MDF. It is a great piece of scenery to use with 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Some people say it is impossible to visit the Bazaar without spending coin. These people are wrong, they do accept card."

The Oasis bazaar is a great addition to your desert town. It has many levels for your miniatures to climb and provides a great vantage point from which to survey your foes. This kit is made from 3mm MDF. It is a great piece of scenery to use with 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

''Neighbours Noel and Liam do not get on, I'm starting to wonder if walls are enough to separate them''

The Oasis town kit comes with seven buildings that, spread apart, create a sprawling village or can be stacked to give the appearance of a much larger townhouse. Easy to put together these building make good scatter for any desert board. This kit is made from 3mm MDF. It is a great piece of scenery to use with 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The Rusty Blade Tavern is made from 3mm MDF. It is easy to put together and looks great on the tabletop. Great scenery to use with D&D and other 25-28mm games. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Supporting My Chemical Romance on their new tour: Abandoned Abbey! Wait, this is a different Abandoned Abbey?

The Abandoned Abbey is a massive kit containing loads of different ruined buildings, walls, gateways and accessories.

As with all of our Savage Domain kits, the Abandoned Abbey is completely modular, using simple plugs to connect pieces together. You can make long walls, enclosed courtyards, and dense urban environments. Keep the pieces separate for easy storage and to be able to make brand new layouts for each game.

Each of the pieces in the kit follows a strict grid structure too, meaning that it can be used for roleplaying games as well as skirmish games.

Savage Domain: Abandoned Abbey is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.