The Adnet Apartments are made from 3mm MDF and 1mm greyboard. It is easy to put together and looks great on the tabletop. Great scenery to use with Epic and Dropzone Commander, or other 10mm wargames. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Snipe from the roofs, hide round the corners, just don't fall off the bridge.

The Alphabet Tenements are an excellent way at bulking out the scenery on your board. They make brilliant buildings to block line of sight and occupy. The buildings themselves require no glue to put together, only the roof access pieces need sticking together. That means that you can flat pack them down after each game.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone Commander and will work perfectly with other 10mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Some say the Ashford Pressureworks looks like a big drum, and they'd be right. Inside however is the most advanced pressure alteration system known to man.

The Ashford Pressureworks contains 1 large pressure building and 1 small relay hub. The smaller building is great for a small objective room, with entrances on either side and plenty of space on top for troops. The large pressure building is a bit precarious perched on those pipe-like legs, but provides great line of sight blocking for aircraft while still letting tanks freely roll underneath it.

Ashford Pressureworks are made from 3mm MDF. Designed for Dropzone Commander, they'll work perfectly well in any other 10mm sci-fi wargame.

Model supplied unpainted and requires assembly. Some kits will need cutting and sanding for a perfect fit - always dry fit your models first for best results. We advise using PVA glue for assembling. Any miniatures are for scale only and not included.

Are you looking for some prime Earth real-estate? Maybe something inner city, right next to the Scourge people farm? Look no further than the Brownstone Rows!

With simple construction, and a whole lot of bang for your buck, the Brownstone Rows give a fantastic way to bulk out a board with buildings. These kits don't even need glue to put together (with the exception of the roof vents), meaning they can be slotted together in seconds and then taken apart for flat storage.

This kit comes with four Brownstone Rows, each of which has a unique design. Standing at 6cm high and 13cm long, they're perfect small buildings.

Made from 3mm MDF, the kit is designed for games of Dropzone Commander, but will work perfectly with any similar scale games.

A true marvel of engineering, the very fact that the Chrysar Building is still standing in the 27th Century is a testament to its construction. Also that no alien races have knocked it down yet!

One of the tallest buildings we've produced for 10mm games, the Chrysar Building stands at approximately 46cm tall, making it perfect for 10mm scale gaming. Made from 3mm MDF and 1mm greyboard, the kit is designed for games of Dropzone Commander, but will work perfectly with any similar scale games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

These Accessories are perfect for filling in those little gaps on your board. They are specificly designed for Dropzone at a 10mm Scale, however would work perfectly with other similar scaled table top games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

Civitalis pattern buildings can be found all over the galaxy where there's been a human presence. One of the most standardised designs available to mankind the origins of the pattern are lost to time, some say that humanity has always had the knowledge to build these buildings while others state, quite clearly that there's no evidence of these buildings existing before the 2nd millennium.

Even war torn futures need somewhere to buy commodities, like combat knifes, relic toasters, or holy maintenance oils for your bed springs. While that may not be much of an issue to those piloting war machines that tower over buildings, its nice to know that even if your planet is getting invaded, virus bombed or its just another Thursday afternoon there's always a bottle of non-person powered dairy substitute waiting for you.

With a set of billboards and rooftop walkways the Commercia Civitalis provides great areas for your more modest war machines to take cover from the bigger, angrier war machines that want to stomp them into the dirt. Easy to assemble, even without glue, you'll be able to get a table built in no time!

Made from 3mm MDF this kit is perfect for games of Adeptus Titanicus, but will work perfectly with any similar scale games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

This compound was once a well kept, prosperous facility. Now largely forgotten the reconquest has taken interest in reclaiming its lost secrets.

A Compound Alenko makes for a great addition to any 10mm scale board. Its interconnected structures can give cover to troops, or leave the tiniest sliver of sight through for a lucky pot-shot.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone Commander and will work perfectly with other 10mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

There's something in those silos, lieutenant we just need to break in to find it! Why else would they have a processing plant attached to them?

A Compound Benezia is a great way to help fill out a board of 10mm industrial terrain. It's two connected sections provide line of sight blocking for both ground and air based units. The gantries between both splits the garrison into two and provides space underneath to hide units from either side. Or to just drive your tanks through.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone Commander and will work perfectly with other 10mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included

Sir, I don't think those silos are full of water, jellies would have taken it all by now. Looks pretty hazardous if you ask me.

A Compound Chakwas is an imposing structure, at least as far as 10mm scale goes. This structure makes for a great solid centrepiece for your board. Unmistakably industrial and build to contain some pretty dangerous compounds, your units -should- be safe from enemy fire behind it.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone Commander and will work perfectly with other 10mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

A common site early on in the settlement process, these old FOB's often get repurposed for industrial control and storage.

A single Compound Drack contains enough buildings to comfortably house a small security detachment early in a settlements development. On the tabletop a Compound Drack gives you 4 buildings to move around and make some great looking boards with.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone Commander and will work perfectly with other 10mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

What kind of manufacturing plant needs a high security watchtower? What did they even make here?

If you need a large and imposing industrial building for your 10mm scaled games, then the Compound Eve has exactly what you need. It's large footprint makes it a great focal point and objective building, and lots of roof space is always a plus. This kit also includes a watchtower, to keep an eye on the surroundings and make sure no one unauthorized gets to access the factory proper.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone Commander and will work perfectly with other 10mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Shame the scourge invaded, before this one could be finished.

The Construction Site are an excellent way at bulking out the scenery on your board. They make brilliant buildings to block line of sight and occupy. The buildings themselves require no glue to put together, only the roof access pieces need sticking together. That means that you can flat pack them down after each game.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone Commander and will work perfectly with other 10mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Completely different to Exhaust Towers, cooling towers are usually used to lower the temperature of something.

What industrial area would be complete without cooling towers, billowing out harmful, toxic Dihydrogen Monoxide. This pair of towers connected by a winding walkway is a great line of sight break for ground units, and some cover for carefully flown aerial units.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone Commander and will work perfectly with other 10mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Cradle Commerce provides logistics and transport solutions to all human populated worlds. Our distribution network supports businesses and individual customers galaxy wide. We take pride in our fleet of ships and we look forward to taking your order."

At approximately 64cm tall it's a perfect centrepiece for you Dropzone and other 10mm scale gaming boards. Made from 3mm MDF, it's easy to put together and look greats on the tabletop.

The Cradle commerce set is so large that it is designed to come apart into two sections. Each section can also be used as a standalone building itself.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

"If you turned a fancy office building into a giant marble run, this would be the outcome"

The Dicington Tower is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone and will work perfectly with other 10mm games. Designed to work with D6 up to 16mm in size and D10 up to 20mm in diameter.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Civitalis pattern buildings can be found all over the galaxy where there's been a human presence. One of the most standardized designs available to mankind the origins of the pattern are lost to time, some say that humanity has always had the knowledge to build these builings while others state, quite clearly that there's no evidence of these buildings existing before the 2nd millenium.

The Domicile Civitalis is primarily used for habitation, each block able to house many dozens of workers for forges, administratums and other miscelanious duties. Able to be connected to the other Civitalis buildings with the included walkways you can make sprawling interconnected hives. It's L shape provides great cover for smaller war machines and plenty of roof space for troops. Easy to assemble, even without glue, you'll be able to get a table built in no time!

Made from 3mm MDF this kit is perfect for games of Adeptus Titanicus, but will work perfectly with any similar scale games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

Where these towers are getting their exhaust from, nobody quite knows. That said, it seems to be pretty sought after whatever it is.

Exhaust Towers add a great touch of industry to any 10mm scale board. What mystery smoke they spill out is anyone's guess, but they look the part and that's what counts. While the towers themselves can be used to obscure anything in the air, the walkways around them are completely exposed, infantry should take care when operating on them.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone Commander and will work perfectly with other 10mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The Jellies are coming! They're going to squirm into your brain and walk you around like a puppet! Don't risk your family's safety, and take all your valuables (particularly your vehicles, we really need those) to a patented Eyrie Bunker! Safe against any invasion!

With a heavy-set design, the Eyrie Bunker is the answer to your worries. It is low to the ground and reinforced with the sturidest MDF, making a perfect place to hide objectives (good luck finding them again though).

Made from 3mm MDF and 1mm greyboard, this kit stands at 8cm high and is designed for games of Dropzone Commander, but will work perfectly with any similar scale games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

An up-scaled command tower from a Ferrum, featuring even more up-scaled tea making facilities. Underground storage tanks can store over 2 million litres of water, while store rooms house over 30 different types of tea. Staff are on hand 24 hours a day to provide fresh tea to the brave UCM soldiers at the head of the reconquest.

This armoured command centre is quick to assemble and provides a great building to garrison your UCM troops in, or a great building to taunt your UCM opponents from.

Made from 3mm MDF and 1mm greyboard, this kit stands at 8cm high and is designed for games of Dropzone Commander, but will work perfectly with any similar scale games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.