• Some places in the Iron Labyrinth are oddly spacious, with high ceilings, it's as if they were designed with larger creatures in mind. These areas can be especially dangerous for those foolish enough to enter them.

    Designed to be compatible with board tiles from a popular gang based skirmish game. Iron Labyrinth High Walls add some, well, height to your board. Double the height of a standard Iron Labyrinth wall these make great solid single mini walkways for our other Industrial Hive scenery.

    This kit includes 5 Wall sections and 3 Columns as well as connectors to allow it to neatly connect to exisiting INH products.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Miniature and board tile not included and for scale only.

    Backorder

    MSRP $28.00

    Released on April 8, 2022

    $22.40

  • Certain sections in the Iron Labyrinth will allow you access to the top of the walls, able to look down upon those that still remain in the Labyrinth. Doing so, however, is ill advised as the odds of getting shot at increase dramatically.

    Designed to be compatible with board tiles from a popular gang based skirmish game. Iron Labyrinth Stairs allow you to make sections of Iron Labyrinth into raised walkways or to gain access to the other side of a wall.

    This kit includes 2 stair sections that connect with the connector blocks contained within other Iron Labyrinth kits.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Miniature and board tile not included and for scale only.

    Backorder

    MSRP $11.20

    Released on April 8, 2022

    $8.96

  • The most intense fighting in the Iron Labyrinth happens at the conflux of the different sectors, infrastructure long since forgotten by the world above hums, bubbles and grinds, covering the sounds of combat. Most of this area of the labyrinth is structural support, with reinforced wall sections being the bulk of the view holding up the city above and providing a claustrophobic maze of passages, chambers, and dead-ends.

    Designed to be compatible with board tiles from a popular gang based skirmish game. This Iron Labyrinth set comes with an incredible 24 connector blocks, 21 end walls, and 18 wall sections in 6 designs (8 solid walls, 2 grid walls, 2 solid pipe walls, 2 vertical pipe walls, 2 reinforced pipe walls, and 2 fan walls).

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Miniature and board tiles not included and for scale only.

    Backorder

    MSRP $98.00

    Released on April 8, 2022

    $78.40

  • "Every futuristic hive city needs moving platforms, the Nihilus Floorstrider could keep you one step ahead of the competition."

    This kit contains the Nihilus Floorstrider which is fully compatible with all other items from our Industrial Hive range.

    The Nihilus Floorstrider is made from 3mm MDF. Great scenery to use with 28-32mm wargames.

    Model supplied unpainted and will require assembly. We advise using PVA glue for the best results. Any models shown in the photos are for scale only and not included.

    Backorder

    MSRP $12.60

    Released on April 8, 2022

    $10.08

  • "The most optimal way of bringing demons into this world is through a gateway. They're re-usable, scalable, and you know exactly where to point anti-tank weaponry. The downside is actually having to deal with the monstrosities you summon, and cleaning up the mess afterwards."

    The Nihilus Gateway is a larger version of the gateway present in the Nihilus Industrial Complex and makes a great focal point to fight over. Whether you need to call in demonic reinforcements, or simply dial home, the Nihilus Gateway has you covered.

    This kit is made with 3mm MDF and comes with one gateway section, one double platform section, and two sets of stairs. The platform section can be used under the gateway or on its own and is fully compatible with all other items from the Industrial Hive range.

    Model supplied unpainted and will require assembly. We advise using PVA glue for the best results. Any models shown in the photos are for scale only and not included.

    Backorder

    MSRP $15.40

    Released on April 8, 2022

    $12.32

  • Angled platforms create a web of interweaving metal, perhaps more so than their square counterparts.

    This set of platforms and gantries are designed to be compatible with a popular gang based skirmish game. The alpha complex starts your hive board off right with a more angular construction that traditional square platforms giving you more construction options, especially when added to other kits in the range.

    All Industrial Hive kits are designed to work together, utilising an innovate clip system to enable every piece to attach to another. Using the in-built modularity you can attach stairs to walkways to platforms to offices to pipes to silos to walls all in a continuous mass of metal (well, MDF) to create literally billions of different board layouts. All this modularity will make your games in the sprawling Industrial Hive more fun than ever.

    This kit includes 4 large platforms and 5 smaller ones with connectors on all sides. Also included are; 2 large towers, 2 small towers, 4 walkways and 6 smaller walkways.

    This kit is made from 3mm MDF and has been designed for sprawling games of 28-32mm gang warfare set in a dense jungle of machinery.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

    Backorder

    MSRP $39.20

    Released on April 8, 2022

    $31.36

  • Rigid metal gantries link together a series of industrial platforms forming a harsh and inflexible scaffolding.

    This set of platforms and gantries are designed to be compatible with a popular gang based skirmish game. The beta complex makes a great starter set, providing a modular series of connecting platforms and walkways. The smaller box rooms are also designed to fit on the centre of the larger platforms proving further layout combinations.

    All Industrial Hive kits are designed to work together, utilising an innovate clip system to enable every piece to attach to another. Using the in-built modularity you can attach stairs to walkways to platforms to offices to pipes to silos to walls all in a continuous mass of metal (well, MDF) to create literally billions of different board layouts. All this modularity will make your games in the sprawling Industrial Hive more fun than ever.

    This kit includes 2 large platforms and 2 smaller ones with connectors on all sides. Also included are; 4 small box rooms/platforms, 2 small walkways, 4 large walkways.

    This kit is made from 3mm MDF and has been designed for sprawling games of 28-32mm gang warfare set in a dense jungle of machinery.

    Backorder

    MSRP $39.20

    Released on April 8, 2022

    $31.36

  • Every self respecting hive city needs a massive smokey power plant and these big towers fill that role expertly. Try not to inhale any thing coming out of it if you can.

    At approximately 27cm tall it's perfect for 28-32mm scale gaming in any hive or otherwise apocalypticly ravaged world. Made from 3mm MDF, it's easy to put together and look greats on the tabletop.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Miniature not included and for scale only.

    Backorder

    MSRP $26.60

    Released on April 8, 2022

    $21.28

  • Are you sick of getting shot up all live long day? So many walkways around here and not enough cover? You need CoverTEC! The CoverTEC walkway is designed with YOUR safety in mind!

    At approximately 7cm tall it's perfect for 28-32mm scale gaming in any hive or otherwise apologetically ravaged world. Made from 3mm MDF, it's easy to put together and look greats on the tabletop.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

    Backorder

    MSRP $9.80

    Released on April 8, 2022

    $7.84

  • Every post apocalyptic hive city needs some good office space for administration and proper organisation. How often they get shot up is neither here nor there. This walkway is only half covered just in case you only need partial storage solutions.

    At approximately 7cm tall it's perfect for 28-32mm scale gaming in any hive or otherwise apologetically ravaged world. Made from 3mm MDF, it's easy to put together and look greats on the tabletop.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

    Backorder

    MSRP $8.40

    Released on April 8, 2022

    $6.72

  • A nice place for a little rest in between shooting and getting shot.

    At approximately 7cm tall it's perfect for 28-32mm scale gaming in any hive or otherwise apologetically ravaged world. Made from 3mm MDF, it's easy to put together and look greats on the tabletop.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

    Backorder

    MSRP $9.80

    Released on April 8, 2022

    $7.84

  • Is your hive city running out of power and walkway space? Well, you're in luck because this power generator comes with built in walkways. Just try not to puncture the reactor with small arms fire, what comes out smells really bad, it also melts through anything it touches...

    At approximately 12cm tall (15 with barricades) it's perfect for 28-32mm scale gaming in any hive or otherwise apologetically ravaged world. Made from 3mm MDF, it's easy to put together and look greats on the tabletop.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

    Backorder

    MSRP $19.60

    Released on April 8, 2022

    $15.68

  • This charming little walkway blows hot stinking air from the lower levels right past where you will be walking. Where better to place something like that?

    This kit comes with interchangeable Vats and Fans, the Vat section has locator tabs to join onto the INH019 Industrial Chem Vat. At 10cm tall for the Vats and 2.5cm for the fans it's perfect for 28-32mm scale gaming in any hive or otherwise apocalypticly ravaged world. Made from 3mm MDF, it's easy to put together and looks great on the tabletop.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Miniature not included and for scale only.

    Backorder

    MSRP $11.20

    Released on April 8, 2022

    $8.96

  • Every filthy hive needs a little office space, to sort logistics and store paperwork. It's a shame that they get used more for bunkers and firing holes than anything worthwhile.

    This kit comes with interchangeable Office and Grate section. At 7cm tall for the Vats and 2.5cm for the fans it's perfect for 28-32mm scale gaming in any hive or otherwise apocalypticly ravaged world. Made from 3mm MDF, it's easy to put together and looks great on the tabletop.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Miniature not included and for scale only.

    Backorder

    MSRP $11.20

    Released on April 8, 2022

    $8.96

  • If your hive city is running out of space, where better express all of that toxic gas than right next to where people are walking?

    This kit comes with interchangeable Vent part and Barrels. At approximately 5cm tall it's perfect for 28-32mm scale gaming in any hive or otherwise apocalyptic ravaged world. Made from 3mm MDF, it's easy to put together and look greats on the tabletop.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Miniature not included and for scale only.

    Backorder

    MSRP $11.20

    Released on April 8, 2022

    $8.96

  • Curved metal gantries provide a connection to stairs allowing access up and down to the higher levels of the hive structure.

    This set of gantries and stairs are designed to be compatible with a popular gang based skirmish game. The Walkways kit makes a double height scaffold with stair access, it is a great supplementary set to add more height and access to platform levels of other kits.

    All Industrial Hive kits are designed to work together, utilising an innovate clip system to enable every piece to attach to another. Using the in-built modularity you can attach stairs to walkways to platforms to offices to pipes to silos to walls all in a continuous mass of metal (well, MDF) to create literally billions of different board layouts. All this modularity will make your games in the sprawling Industrial Hive more fun than ever.

    This kit includes 3 large thin walkways and 2 sets of stairs.

    This kit is made from 3mm MDF and has been designed for sprawling games of 28-32mm gang warfare set in a dense jungle of machinery.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

    Backorder

    MSRP $22.40

    Released on April 8, 2022

    $17.92

  • Maybe one day our fortunes might change and we could become Slum Block Millionaires.

    The Sector 2 Slum Blocks are the ideal piece of kit for your table top, this is due to it containing 5 stackable blocks which allows completely modularity allowing you to stack or space out the blocks in countless ways, allowing you to build vertically or horizonatly or even a combination of them both.

    All Industrial Hive kits are designed to work together, utilising an innovate clip system to enable every piece to attach to another. Using the in-built modularity you can attach stairs to walkways to platforms to offices to pipes to silos to walls all in a continuous mass of metal (well, MDF) to make your games in the sprawling Industrial Hive more fun than ever.

    This kit is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with modern and futuristic 28-35mm wargames.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

    Backorder

    MSRP $14.00

    Released on April 8, 2022

    $11.20

  • Want be a Slumlord? Or maybe a nightmare tenant? Either way this is the kit for you, boasting many modular parts that can be arranged in all shapes and sizes creating a high-rise monolith or a ground level compound.

    The sector 2 Slum Complex is perfect for your table top. Why? So many places to hide. So many places for an ambush. the slums might not be the most glamorous but they defiantly have a special place in terms of gamming.

    The set is completely modular, allowing you to build up or sideways. You might not be a millionaire but you rule the slum. Also, the modularity allows this kit to be combined with multiple INH kits. Yes you make it even larger then just this one large kit.

    This kit is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with modern and futuristic 28-35mm wargames.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included. The set contains:

    • 7x Square platforms
    • 3x Square platform stairs
    • 4x Large platforms
    • 6x Small platforms
    • 14x Modular supports
    • 4x Barricades
    • 14x Railings
    • 15x Lamp clips
    • 2x Pylons
    • 12x Lamp clips
    • 3x Level clip supports

    MSRP $39.20

    Released on April 8, 2022

    $31.36

  • Want be a Slumlord? Or maybe a nightmare tenant? Either way this is the kit for you, boasting many modular parts that can be arranged in all shapes and sizes creating a high-rise monolith or a ground level compound.

    The sector 2 Slum Complex is perfect for your table top. Why? So many places to hide. So many places for an ambush. the slums might not be the most glamorous but they defiantly have a special place in terms of gamming.

    The set is completely modular, allowing you to build up or sideways. You might not be a millionaire but you rule the slum. Also, the modularity allows this kit to be combined with multiple INH kits. Yes you make it even larger then just this one large kit.

    This kit is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with modern and futuristic 28-35mm wargames.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included. The set contains:

    • 7x Square platforms
    • 3x Square platform stairs
    • 4x Large platforms
    • 6x Small platforms
    • 14x Modular supports
    • 4x Barricades
    • 14x Railings
    • 15x Lamp clips
    • 2x Pylons
    • 12x Lamp clips
    • 3x Level clip supports

    Backorder

    MSRP $42.00

    Released on April 8, 2022

    $33.99

  • It's said that you can make it from one side of the Delta to the other without ever setting foot on the ground. I mean, if you count "ground" as dirt or grass then that's easy, but it's still not much of a challenge if you mean "large flat piece of metal".

    The Sector 3 - Delta Complex is a mass of sprawling walkways, silos, and platforms. Each main piece is made with a circular design, which means the variations you can have on your table are basically endless. With large walkways to attach to your platforms you can make dozens of interconnected railings, especially considering the all the circular pieces can be stacked on top of each other infinitely!

    Between the small vats and tall platforms you'll have thousands of options of stacking, and plenty of areas to hide, especially considering the dozens of modular barricades in the kit.

    All Industrial Hive kits are designed to work together, utilising an innovate clip system to enable every piece to attach to another. Using the in-built modularity you can attach stairs to walkways to platforms to offices to pipes to silos to walls all in a continuous mass of metal (well, MDF) to create literally billions of different board layouts. All this modularity will make your games in the sprawling Industrial Hive more fun than ever.

    The set contains: - 4 Platforms, 3 Half Silos, 5 Large Clip on platforms, 10 Half Walkways, 3 Walkways, 32 Baricades, 2 Ladders, 3 half Ladders.

    This kit is made from 3mm MDF and has been designed for sprawling games of 28-32mm gang warfare set in a dense jungle of machinery.

    Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

    Backorder

    MSRP $39.20

    Released on April 8, 2022

    $31.36

Showing 881 to 900 of 1177 results

items per page

Show filters