"These walkways make for a great defence! Unless the enemy has climbing gear... or claws. P-Perhaps another once around just to be sure..."

The Fondamenta de l'Arsenal is an interesting and modular piece that works perfectly for many system. It allows for unique and interesting board designs every time you play. Providing a wonderful amount of line of sight blocking and alleviation, the Fondamenta de l'Arsenal also comes equipped with a fully playable roof area!

The Modular Fondamenta de l'Arsenal is made from 3mm MDF and is made for Carnevale and will work perfectly with other 28-32mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Venice looks so beautiful from up here! It is a shame about all those monsters though... truly ruins the ambience."

This kit is perfect for almost any Carnevale board! Able to be situated in the water and fit over a board tile, it allows for interesting and unique board designs. Not only this, it boasts some impressive vantage points just begging to be taken advantage of!

The Modular Torre dell'Arsenal is made from 3mm MDF and is made for Carnevale and will work perfectly with other 28-32mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"I can't possibly imagine how hard it was to load the boats before these cranes were invented."

This kit makes a great addition to a Carnevale board. Both cranes are able to rotate a full 360 degrees, allowing for them to be positioned exactly how you please. Alongside this the basket platforms are wide enough to fit a 32mm base.

The Dockyard Cranes is made from 3mm MDF and is made for Carnevale and will work perfectly with other 28-32mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Whether fleet of foot or full of folly, the thieves have taken to the rooftops, commander! Should we follow?"

This kit makes a great addition to any Carnevale board. Providing wonderful opportunities to seize the high ground, the fight can soar to new heights! Better yet by having a slightly angled roof, models can safely perch on top of the building allowing for an excellent vantage point.

The Modular Fondaco Dei Turchi is made from 3mm MDF and is made for Carnevale and will work perfectly with other 28-32mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"These walls have stood for generations and neither Rent nor beast will bring them down."

This kit makes a great addition to any Carnevale board. By having a slightly angled roof, models can safely perch on top of the building allowing for an excellent vantage point. With the walls being modular, it allows you to set up your board in different ways every time you play!

The Modular Fondaco Dei Turchi Walls is made from 3mm MDF and is made for Carnevale and will work perfectly with other 28-32mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Shut the gates, quickly! Those blasphemous creatures care not for sanctuaries. Steady yourselves, we must be the stone in this storm."

Adding a touch of sanctity to the sordid streets of Venice, the Porta Magna is a stellar example of architecture and class in a time of depravity.

The Porta Magna is made from 3mm MDF and is made for Carnevale and will work perfectly with other 28-32mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"When they said food falls from the skies this is not what I expected."

The Bowery Stacks, where who stands at the top is truly living the highlife. This two-building kit features removeable walls and floors allowing for full exterior and interior play. With enclosed and open sections, there are plenty of line of sight blocking and cover to prepare for ambushes as you traverse your way throughout the buildings. Combine this kit with the rest of the stacks range to build the ultimate Sci-Fi board.

The Bowery Stacks is made from 3mm MDF. It is a great scenery kit to use in Sci-Fi skirmish games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and not included.

"These containers won't ship themselves, get to work!"

The Industrial Compound set has everything you need to get a Sci-Fi X board started. It has plenty of playability features including line of sight blocking, solid vantage points and interconnected structures to give cover to troops. This unique collection of scenery is sure to catch the eye on any table top.

This set contains 1x Alenko compound, 2 x spaceyard cranes, 1x sphere, 2x walkways, 3x containers, 1x office

The Industrial Compound is made from 3mm MDF. It is a great scenery kit to use in sci-fi skirmish games, and will work perfectly with 10mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and not included.

"Please be cautious of falling containers. The operator is new."

This kit contains 1 tall crane that towers over the table top, as well as 1 medium sized container crane. Alongside this there are 2 mini offices perfect for blocking line of sight.

Spaceyard Crane are made from 3mm MDF. Designed for Dropzone Commander, they'll work perfectly well in any other 10mm sci-fi wargame.

Model supplied unpainted and requires assembly. Some kits will need cutting and sanding for a perfect fit - always dry fit your models first for best results. We advise using PVA glue for assembling. Any miniatures are for scale only and not included.

Destruction as far as the eye can see, who knows what lies within the rubble.

This kit contains a vast amount of corner ruins of varying size, allowing for plenty of line of sight blocking as well enough terrain to fill out a large portion of a gaming board.

City Ruins are made from 3mm MDF. Designed for Dropzone Commander, they'll work perfectly well in any other 10mm sci-fi wargame.

Model supplied unpainted and requires assembly. Some kits will need cutting and sanding for a perfect fit - always dry fit your models first for best results. We advise using PVA glue for assembling. Any miniatures are for scale only and not included.

"Mission log - We have located the escape pod and data retrieval has been initiated. Survivor status: Unknown. Proceeding to the next waypoint."

The Crashed Escape Pod is the perfect addition to any Dropzone Commander battlefield, giving some good cover for your units. This scenery piece can also be a great place to hide objectives. Who knows, you could also uncover some secret weapon plans or even a few robots!

Contains 1 single-piece resin miniature. Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

Suitable for Dropzone Commander and other 10mm wargames. Footprint measures 10.3cm x 6.5cm.

"The generators must be protected at all costs, they are integral to our infrastructure!"

This kit contains 3 Echo Generators. They are fantastic objective markers as well as line of sight blocking buildings.

Echo generators are made from 3mm MDF. Designed for Dropzone Commander, they'll work perfectly well in any other 10mm sci-fi wargame.

Model supplied unpainted and requires assembly. Some kits will need cutting and sanding for a perfect fit - always dry fit your models first for best results. We advise using PVA glue for assembling. Any miniatures are for scale only and not included.

"Let's hope these radio dishes still get the football results all these light years away."

This kit contains 3 Radio dishes and 1 radio hub. They are fantastic objective markers as well as line of sight blocking buildings.

Radio Dishes are made from 3mm MDF. Designed for Dropzone Commander, they'll work perfectly well in any other 10mm sci-fi wargame.

Model supplied unpainted and requires assembly. Some kits will need cutting and sanding for a perfect fit - always dry fit your models first for best results. We advise using PVA glue for assembling. Any miniatures are for scale only and not included.

"Wow, the views from my balcony are amazing!"

Calle de la Ceramica is a gorgeous set of 3 buildings that offers a wide magnitude of options to the tabletop. They are of varying height, allowing for Carnevale models to easily scale the buildings when used alongside each other. However these are also perfect to be split up and placed away from each other on a table top.

The Modular Venetian kits all work together to form something better than the sum of their parts. Using a handy clip system that the buildings sit on top of, you can link any of these kits together to create an intricate and complicated group of houses - the exact kind you find in Venice!

This kit is made from 3mm MDF and has been designed for Carnevale, using multiple storeys to climb and jump, and roofs at easy angles so that miniatures will not fall off when darting across the Venetian skyline. It is a great piece of scenery to use with other 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Hunny, those annoying Guild children are running across the roof again."

The Calle Svoltare is a beautiful set of 3 buildings that offers a wide magnitude of options to the tabletop. They are of varying height, allowing for Carnevale models to easily scale the buildings when used alongside each other. However these are also perfect to be split up and placed away from each other on a table top.

The Modular Venetian kits all work together to form something better than the sum of their parts. Using a handy clip system that the buildings sit on top of, you can link any of these kits together to create an intricate and complicated group of houses - the exact kind you find in Venice!

This kit is made from 3mm MDF and has been designed for Carnevale, using multiple storeys to climb and jump, and roofs at easy angles so that miniatures will not fall off when darting across the Venetian skyline. It is a great piece of scenery to use with other 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"I've always wanted to visit Venice, but I did not expect all these people to be running over my roof."

Calle de la Riva is a gorgeous set of 3 buildings that offers a wide magnitude of options to the tabletop. They are of varying height, allowing for Carnevale models to easily scale the buildings when used alongside each other. However these are also perfect to be split up and placed away from each other on the tabletop.

The Modular Venetian kits all work together to form something better than the sum of their parts. Using a handy clip system that the buildings sit on top of, you can link any of these kits together to create an intricate and complicated group of houses - the exact kind you find in Venice!

This kit is made from 3mm MDF and has been designed for Carnevale, using multiple storeys to climb and jump, and roofs at easy angles so that miniatures will not fall off when darting across the Venetian skyline. It is a great piece of scenery to use with other 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Fortify the bunkers, the enemy approaches!

This Bolstered Bunkers box contains enough scenery to make a heavily fortified encampment perfect for Sci-Fi Gothic games set in the far future. Built for gaming, each bunker has removable fIoors for interior play - perfect for both competitive and narrative

games.

This set contains 2 bunkers and 12 free standing barricades. This set is designed

for 28-32mm scaled miniatures

The Bolstered Bunkers are made from 3mm MDF. It is a great scenery kit to use in sci-fi skirmish games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.