Behold, the tower of our Lord, marvel in its magnificence.

This set contains one two storey Yu Pagoda, a great centrepiece for any eastern themed board!

The pagoda is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy or modern wargames games, and will work perfectly with 28-32mm miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Yu Pagoda works well wit the Pagoda Extension.

This kit is comprised of 119 plastic components, with which you can build:

• - 2x STC Hab-bunker
• - 6x Stockades
• - 2x Stockade with Doors
• - 1x Landing Pad
• - 1x Vox-Antenna
• - 1x Auspex Shrine

The set also includes two double-sided folding gaming boards measuring 30" x 22.4", allowing you to build a battlefield suitable for Combat Patrol or Incursion games of up to 1000 points in Warhammer 40,000. These durable boards depict the debris-strewn wasteland of the Imperial frontier on each side, and can be combined with other gaming boards to create battlefields of any size.

These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel paints.

This kit is comprised of 38 plastic components, with which you can assemble one STC Hab-bunker, one Stockade with doors, and three Stockades. The modular nature of the kit allows for a variety of other build options – such as a one long Stockade wall integrated into the STC Hab-bunker, or an enclosed Stockade fort.

These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel paints.

This kit is comprised of 36 plastic components, with which you can assemble one Vox-Antenna and one Auspex Shrine.

These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel paints.

The Hatches are made from resin. They are a great addition to your table top. Designed for 28-32mm wargames.

These are not toys. This set contains small parts. Not for use by anyone under the age of 14.

The pack contains 7 individual pieces, including:

• 3 x Double Sided Hatches
• 2 x Circular Hatches
• 2 x Skull Hatches

The Control Panels are made from resin. They are a great addition to your table top. Designed for 28-32mm wargames.

These are not toys. This set contains small parts. Not for use by anyone under the age of 14.

The pack contains 20 individual pieces, including:

• 2 x Freestanding Terminals
• 6 x Wall Terminal with Screen
• 6 x Wall Terminal with Palm Scanner
• 6 x Wall Terminal with Retinal Scanner

The Hatches are made from resin. They are a great addition to your table top.

The pack contains 8 individual pieces, including:

4 x Double Sided Door Hatches, 4 x Handles. Designed for 28-32mm wargames.

These are not toys. This set contains small parts. Not for use by anyone under the age of 14

The Hatches are made from resin. They are a great addition to your table top.

The pack contains 8 individual pieces, including:

4 x Double Sided Door Hatches, 4 x Handles. Designed for 28-32mm wargames.

These are not toys. This set contains small parts. Not for use by anyone under the age of 14.

"There is so much stuff! Why have we got to move it all?"

"It's either this is or fixing the plasma leaks and I don't fancy getting zapped"

"...Yeah I gue- *OW!* MY FOOT!!"

The Industrial Gubbinz bits and pieces set is designed to bring detail and depth to your kits and bases! There are over 150 pieces of MDF and 160 pieces of greyboard to make gears, wheels, pipes, grates, detail sheets and more. Industrial in design but miniature in nature, this is an excellent accessory kit to our INH range.

This kit is made from 3mm MDF and has been designed for sprawling games of 28-32mm gang warfare set in a dense jungle of machinery.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Buried deep underneath the city lie miles and miles of catacomb structures, filled with toxic waste, pipes, and the unending sounds of gang warfare. Guaranteed to be 100% bulletproof*, the alpha sector of the Iron Labyrinth is filled with iron lattice walls and large solid pipes. The Iron Labyrinth scenery is perfect to play games of gang skirmish.

*under controlled conditions.

Designed to be compatible with board tiles from a popular gang based skirmish game. Iron Labyrinth sets come with 5 connector blocks, 3 end walls, and 4 wall sections in 2 designs.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Miniature and board tile not included and for scale only.

The beta sector of the Iron Labyrinth is responsible for structural support and transport of liquids to the levels above and below. The reinforced walls feature pressure hardened doors, capable of sealing off entire sections of the labyrinth in case of coolant leaks, radioactive waste, or cold callers.

Designed to be compatible with board tiles from a popular gang based skirmish game. Iron Labyrinth sets come with 5 connector blocks, 3 end walls, and 4 wall sections in 2 designs.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Miniature and board tile not included and for scale only.

The Iron Labyrinth - Death Quadrant Complex is a big name, but not as big as the contents!

Designed to be compatible with board tiles from popular gang based skirmish games, the Iron Labyrinth - Death Quadrant Complex set has everything you could need for games in the deep, dark Industrial Hive.

The set is completely modular, with walls and platforms attaching effortlessly to chunky column sections. The columns themselves are stackable too, which turns these winding corridors into a fully 3D gaming space. The kit is also compatible with every other Industrial Hive product, with the platforms attaching to walkways, power generators and more. There are even a few junctions to attach the Sector 4 pipes!

This kit comes with 11 columns, 4 double walls, 4 single walls, 1 double wide door, 2 single wide doors, 4 stairs, 15 platforms, 7 tiles and 2 ladders. There are so many bits in here!

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Miniature and board tile not included and for scale only.

Heavy duty doors are commonplace in the Iron Labyrinth, able to keep out rampaging beasts, sudden sluice failure, or a gang of ruffians you want to keep out of your turf.

Designed to be compatible with board tiles from a popular gang based skirmish game. Iron Labyrinth Doors provide a great way of blocking off areas as well as providing a choke point to fight over.

This kit includes 2 sliding doors that recces into their connectors and 2 vertical doors that can be removed from their wall section.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Miniature and board tile not included and for scale only.

A little solid ground among uncertain floors. As the spire goes up so must the labyrinth.

Designed to be compatible with board tiles from a popular gang based skirmish game. Iron Labyrinth Floors let you go from 2 to 3 dimensions without sacrificing the connectivity of our Iron Labyrinth Kits

This kit includes 1 large floor with built in walls and connectors on all 4 sides. Also included is a small floor that lacks the walls and connectors, allowing you to include it between our other Iron Labyrinth kits.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Miniature and board tile not included and for scale only.

The gamma sector of the Iron Labyrinth is responsible for air and liquid transport throughout its level. Heavy duty fans move air at surprising speed from one section to another, while reinforced pipes move miscellaneous liquids around the sector.

Designed to be compatible with board tiles from a popular gang based skirmish game. Iron Labyrinth sets come with 5 connector blocks, 3 end walls, and 4 wall sections in 2 designs.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Miniature and board tile not included and for scale only.

Some places in the Iron Labyrinth are oddly spacious, with high ceilings, it's as if they were designed with larger creatures in mind. These areas can be especially dangerous for those foolish enough to enter them.

Designed to be compatible with board tiles from a popular gang based skirmish game. Iron Labyrinth High Walls add some, well, height to your board. Double the height of a standard Iron Labyrinth wall these make great solid single mini walkways for our other Industrial Hive scenery.

This kit includes 5 Wall sections and 3 Columns as well as connectors to allow it to neatly connect to exisiting INH products.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Miniature and board tile not included and for scale only.

Certain sections in the Iron Labyrinth will allow you access to the top of the walls, able to look down upon those that still remain in the Labyrinth. Doing so, however, is ill advised as the odds of getting shot at increase dramatically.

Designed to be compatible with board tiles from a popular gang based skirmish game. Iron Labyrinth Stairs allow you to make sections of Iron Labyrinth into raised walkways or to gain access to the other side of a wall.

This kit includes 2 stair sections that connect with the connector blocks contained within other Iron Labyrinth kits.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Miniature and board tile not included and for scale only.

The most intense fighting in the Iron Labyrinth happens at the conflux of the different sectors, infrastructure long since forgotten by the world above hums, bubbles and grinds, covering the sounds of combat. Most of this area of the labyrinth is structural support, with reinforced wall sections being the bulk of the view holding up the city above and providing a claustrophobic maze of passages, chambers, and dead-ends.

Designed to be compatible with board tiles from a popular gang based skirmish game. This Iron Labyrinth set comes with an incredible 24 connector blocks, 21 end walls, and 18 wall sections in 6 designs (8 solid walls, 2 grid walls, 2 solid pipe walls, 2 vertical pipe walls, 2 reinforced pipe walls, and 2 fan walls).

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Miniature and board tiles not included and for scale only.

"Every futuristic hive city needs moving platforms, the Nihilus Floorstrider could keep you one step ahead of the competition."

This kit contains the Nihilus Floorstrider which is fully compatible with all other items from our Industrial Hive range.

The Nihilus Floorstrider is made from 3mm MDF. Great scenery to use with 28-32mm wargames.

Model supplied unpainted and will require assembly. We advise using PVA glue for the best results. Any models shown in the photos are for scale only and not included.

"The most optimal way of bringing demons into this world is through a gateway. They're re-usable, scalable, and you know exactly where to point anti-tank weaponry. The downside is actually having to deal with the monstrosities you summon, and cleaning up the mess afterwards."

The Nihilus Gateway is a larger version of the gateway present in the Nihilus Industrial Complex and makes a great focal point to fight over. Whether you need to call in demonic reinforcements, or simply dial home, the Nihilus Gateway has you covered.

This kit is made with 3mm MDF and comes with one gateway section, one double platform section, and two sets of stairs. The platform section can be used under the gateway or on its own and is fully compatible with all other items from the Industrial Hive range.

Model supplied unpainted and will require assembly. We advise using PVA glue for the best results. Any models shown in the photos are for scale only and not included.