While not fast, the Atlas can take twice as much punishment as a heavy walker, making it best employed in take and hold style operations, or as close protection for its cargo while they conduct urban operations. Indeed one Atlas provides superior firepower and survivability compared to the pair of Junos normally employed in such roles, albeit at a higher cost.

The Atlas Bulk Personnel Walker uses the new, quadrupedal Type-11 chassis. The Type-11 is medium-heavy, highly resilient and deliverable by medium dropships. This makes it useful in a variety of roles which require more space than standard PHR walkers. The Atlas is best thought of as a walking castle. Its cavernous hold can accommodate 20 infantry in extreme safety while offering respectable firepower. Its pair of light railguns can see off most armoured threats while its twin miniguns can sweep deployment zones of enemy infantry.

Also utilising the new medium-heavy Type-11 chassis, the Lokheira forgoes the Atlas’ transport capacity for increased firepower. It retains the former’s light railguns and miniguns for excellent anti-armour and anti-infantry capability, but also mounts a twin rail-repeater. Single rail-repeaters are carried by the dreaded Phobos walker – one of the best standard anti-air units known to the UCM. A pair of these added to its other weapons makes the Lokheira weapon-rich choice of cargo for PHR generals who want the most punch from a single dropship’s transport capacity. While less flexible than smaller vehicles, a Lokheira offers superior killing power which can be maintained in full while soaking up damage.

Contains 2 multi-part resin miniatures with parts to make either the Atlas Bulk Personnel Walker or the Lokheira Bulk Walker.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

Like other improvised Resistance technicals, the Gunbus repurposes a common, civilian unit. Buses are usually employed as transports, requiring basic modification, but sometimes they are stripped to their chassis, providing space enough to mount heavy weapons.

Too large to mount on a wagon, the pre-war AA emplacement: the G88 flak cannon fires big, air-bursting shells to deal reliable destruction to enemy aircraft. Even before the Scourge invasion, crews were quick to realise that the weapon’s large calibre and decent rate of fire made it lethal against medium armour too. Today, Resistance groups have made the G88 a low-cost, reliable, mobile threat through the simple expedient of bolting it onto a bus chassis.

More rarely, groups have discovered and repurposed a formidable piece of pre-war crowd control tech: the Sonic Deterrence Cannon. Originally, these were towed into position, usually around government buildings and unpopular corporation HQs. The weapon’s beams could be swept over a crowd of thousands, inducing headaches, nosebleeds, defecation, and vomiting. While this area effect has fringe uses militarily, most Resistance techs have modified these to project a focused beam of intense sound potent enough to cause total loss of capability, brain haemorrhage, and finally death, even through walls.

Contains 2 Gunbuses that can be assembled with either the G88 Flak Cannon or the Sonic Deterrence Cannon

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

Several times larger than their more common cousins the Warstriders, Siegestriders were dubbed for their ability to clamber over or through the tallest defences. The most well-known forms are quadruped, although more accurately they have two legs and two arms.

The Lion variant carries possibly the most unusual weapon seen on the battlefields of the 27th century: The Transmatter Beam. It actually has two functions, the first being non-offensive. It can make use of the teleportation web technology built into friendly constructs to de-materialise and re-materialize these units anywhere in line of sight, even if they are far from a gate. The second, weaponised function is the result of firing such a beam at something without tapping into teleport web technology.

The Tiger carries a pair of Disintegrators - battlefield versions of the type of armament common on Shaltari starships. These weapons transfer huge amounts of energy to a very small area in crackling, split-second bursts. This causes devastating atomic effects, releasing further energies into the target. The appearance is of an explosive detonation that leaves an atomised, gaping hole behind.

Contains 1 multi-part resin miniature with parts to assemble as either a Lion Siegestrider or Tiger Siegestrider

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

Please note that Behemoths are massive kits, and advanced modelling projects. Extra care, attention, and hobby skills will be required to assemble and paint them. Because of that, this kit it is only recommended for advanced modellers. Some parts will need heating and bending to fit perfectly straight and slight gaps might need filling.

The scale of these diggings require similarly gargantuan machines. For the Resistance, these became prime targets for all sorts of modifications - the vast majority not for battlefield roles, but some have proved surprisingly effective. By far the most commonly used is the Avernus platform, a quadruped design with heavy armour, designed to cope with tunnel collapses and uneven, virgin cave formations.

These mighty Mining Engines are based off of the same heavy armoured hull that can withstand the strongest of firepower. Both variants come bearing two autocannons that ignore all cover making them excellent for clearing out those hidden units.

The Avernus has a large Mining Laser mounted on the back of the hull, this weapon fires a beam and punches through everything caught in its path, be that building, armour or infantry. The Cerberus swaps the direct firepower of the Mining laser for the more versatile Vent Repeater. The shots from this weapon can deal devastating damage and in desperate times the crew can overcharge the Repeater to increase the energy of the weapon, however this can come with terrible consequences.

Contains 1 multi-part resin miniature with parts to assemble as either an Avernus Mining Engine or a Cerberus Mining Engine.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

Please note that Behemoths are massive kits, and advanced modelling projects. Extra care, attention, and hobby skills will be required to assemble and paint them. Because of that, this kit it is only recommended for advanced modellers. Some parts will need heating and bending to fit perfectly straight and slight gaps might need filling.

Since mankind’s first contact with the Shaltari, the Gaia has been the alien’s closest equivalent to a heavy dropship, enabling bulk teleportation of large ground units. However, the Gaia’s lack of conventional armament has always restricted its use to pre-cleared dropsites. Around a year into the

Earth campaign, a new variant has appeared. Designated ‘Adamah’.

This formidable aircraft trades some transport capacity for a pair of front-mounted gravity cannons. These amplify the force of gravity to crush tanks like empty drinks cans, pulping their crews in the process. With formidable anti-armour weaponry, the Adamah can support its own landings, making it a singular threat that can operate far from support.

Although large, these have been observed operating alone in a vanguard/probing role, as well as in small-scale, surgical strikes. Commanders on the ground are learning to fear single-blip Shaltari contacts, as one Adamah can sweep a landing zone clear of picket units, then teleport in endless waves of lethal warstriders, gravtanks and support vehicles.

Contains 1 multi-part resin miniature with parts to assemble one Adamah Gungate.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

Daggers are silent hunting creatures – Fauna that stalk from the shadows to attack their prey. They inhabit environs across the Cradle Worlds and can lay dormant for years, living off tiny scraps of food for long periods of time.

These dangerous Fauna are available to use in your games of Dropzone Commander, regardless of which faction you play. They inhabit buildings, making occupation an extremely tense idea!

The full unit profile for Daggers along with rules for using non-player Fauna are available in Reconquest: Phase 2.

Kit contains a random assortment of 9 resin miniatures supplied unpainted and unassembled with plastic bases.

“Mauler” is the catch all term for any hulking, belligerent beasts roaming over large areas in angry packs. No matter their actual genus, this subset of Fauna are always territorial, but over a much larger area than many other Fauna seen during the Reconquest. They patrol through cities and across plains searching for threats to their sovereignty, lashing out at any they see as encroaching upon their territory.

The fearsome Maulers are Fauna, non-player units that can be used in your games of Dropzone Commander, regardless of which faction you play. They hunt in packs of three, although even a single Mauler is enough to make trouble for the most seasoned of Commanders!

The full unit profile for Maulers along with rules for using non-player Fauna are available in Reconquest: Phase 2.

Kit contains 3 resin miniatures supplied unpainted and unassembled with plastic bases.

Resistance cells often have to make do with the equipment they have available. Sometimes it's more effective to keep the vehicles you do have operational than to find operational vehicles you don't have.

The Resistance have plenty of access to vehicles that they can convert into all manner of technicals. The majority of these will end up as either Rocket or AA Gun Technicals, though a small amount will end up used for less destructive purposes. Repair Technicals are able to enact quick battlefield repairs, patching up armour and fixing minor battle damage.

During the Scourge occupation, many resistance bands continued to keep man's best friend. These K9 Attack Units are the mongrel descendants of the purebred pets from days before the occupation. Kept in kennels affixed to K9 Technicals, they're unleashed upon the enemy in support of friendly troops.

Contains 6 K9 Attack Units and 6 Technicals that can be assembled as either K9 or Repair Technicals.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

These Behemoths bear more than a passing resemblance to the smaller Oppressor, although they upgrade to walking on eight legs instead of six. Though still fast, this makes the Scourge Light Behemoth somewhat slower than the heavy-limbed Heavy.

The Punisher is unleashed by the Scourge when they care little for collateral damage. Its forelegs are a pair of hive-like structures that can carry a range of munitions, from explosive pods, to Razorworms. Its tail houses a Quake Bombard, a weapon capable of shaking buildings right down to their foundations.

The Persecutor is the anti-behemoth variant. It is armed with an underslung Plasma Destructor - one of the most powerful plasma weapons the Scourge have comitted to conflict. Backing up this mighty weapon are hull mounted Heavy Plasma Cannons, they themselves are capable of turning armour into molten puddles.

Contains 18 single-piece resin miniatures with 6 plastic bases to make 6 units of Razorworms and 1 multi-part resin miniature with parts to assemble as either a Punisher Terror-Mech or a Persecutor Terror-Mech.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

Please note that Behemoths are massive kits, and advanced modelling projects. Extra care, attention, and hobby skills will be required to assemble and paint them. Because of that, this kit it is only recommended for advanced modellers. Some parts will need heating and bending to fit perfectly straight and slight gaps might need filling.

Although the Heavy was actually the first to hit the frontline, AHQ intends the Light form to overtake the Heavy in terms of numbers, given its lower cost and greater practicality. .

The Brazil and India are the UCM's Light Battle Mechs. These massive quadrupeds sit low to the ground, granting a modicum of cover for their large frame as well as ensuring that even if all legs are destroyed, they are merely immobilised.

Optimised for anti-behemoth roles, the Brazil carries a pair of UMH-2 Mass Drivers. While smaller than the main weapons on the America, they are much more practical and still able to take on the toughest of armour. On two of its legs are UM-88B chainguns for anti-air defence. The India trades out the large Mass Drivers for a set of 4 UMH-19 Flak Cannons. These weapons can make incredibly short work of enemy aircraft and are still large enough to threaten ground based armour.

Contains 1 multi-part resin miniature with parts to assemble as either a Brazil Light Battle Mech or India Light Battle Mech.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

Please note that Behemoths are massive kits, and advanced modelling projects. Extra care, attention, and hobby skills will be required to assemble and paint them. Because of that, this kit it is only recommended for advanced modellers. Some parts will need heating and bending to fit perfectly straight and slight gaps might need filling.

The Vulture has proven a reliable platform for the UCM, as more and more roll off the assembly lines, new variants are being created to fill potential niche's in combat doctrine. A pair of new aerial IFV's are currently being tested in both scout, and combat varieties.

Vultures Gunships come armed with two Twin Cannons, identical to the variants mounted on the Katana light tank, this gives the gunship respectable anti-tank firepower. The optional AA Battery gives the Vulture further versatility, allowing it to take on other aircraft. Alternatively, this kit can be assembled to make the Buzzard Aerial Target Craft, it loses out on one twin cannon, however is now a scouting vehicle. This gives it great versatility, allowing it to spot for units firing indirectly, as well as extend your commander's sphere of influence.

Both of these variants are set on the Vulture ship chassis, giving it good durability and high speed. It is also able to transport two troop units, allowing for high response board control.

Contains 1 multi-part resin miniatures with parts to make a Vulture Gunship or a Buzzard Aerial Target Craft. Also includes parts to arm both with AA Batteries.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

The Type-6 is somewhat smaller than the Type-7, though still enormous and powerfully built. This design is quadruped, with a low centre of gravity and bulky hull.

These still massive walkers are the Alcyoneus and Porphyrion types. Both variants sport a chin mounted triple railgun turret, thrice the armament of a single Type-1 walker. 3 Anti-behemoth missiles make up the rest of the shared armament between these two types.

The Alcyoneus carries a pair of massive railguns equally as powerful as those on the Tiamat. The Porphyrion trades its own offensive ability and instead carries 8 Venus Drones. The Venus Drones are controlled familiars armed with a pair of RX1-L Railguns each as well as a Fusion Mine for heavier targets.

Contains 1 multi-part resin miniature with parts to assemble as either a Alcyoneus Grand Walker or Porphyrion Grand Walker.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

Please note that Behemoths are massive kits, and advanced modelling projects. Extra care, attention, and hobby skills will be required to assemble and paint them. Because of that, this kit it is only recommended for advanced modelers. Some parts will need heating and bending to fit perfectly straight and slight gaps might need filling.

The Bobcat uses a leg layout identical to the walker variants seen in the Aaru theatre, though its use is much more widespread. Seen across multiple battlefronts, the Aaru leg design makes it a much more stable firing platform for its large weapon arrays.

Unlike the alternate versions of the Warstriders, the Bobcat is designed to be a bulwark of heavy firepower. It can bring excellent Anti-Air with the Ion Cannon array, the high volume of shots and decent energy means that arial combatants must steer clear.

Alternatively they can bring the Twin Gravity Cannon, a high energy anti-tank gun with devastator, meaning it can cripple the largest of vehicles.

Contains 1 multi-part resin miniature with parts to arm it with either a Ion Cannon Array or a Twin Gravity cannon

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

The Luna Gunship is an up-gunned variant of the Proteus. Featuring a Huntsman Cluster and a pair of Sunglaives, the Luna can lay down devastating firepower. The Huntsman Cluster alone is made up of several of the main turret weapons of the Juno APC, while only forward facing, they are surprisingly accurate, even when moving at full speed. The Starglaive Pair is a miniature version of the Sunglaives found on the Tethys. Like their larger counterparts, these glaives can be overcharged to break through even the toughest armour.

An Armour Battlegroup is a staple in games of Dropzone Commander, and is a required choice in every army. This set contains all compulsory choices in the Armour

Battlegroup, with Auxiliary units for support. This box is ideal for a new player - if you have a Starter Army, expand your force with this box.

2 Zeus Guardian Walkers lead from the front to provide protection for allied walkers and lay down firepower on the enemy. Following is 2 Menchit Walkers, these can be equipped with a arsenal of weapons to adapt to all situations. A fast moving Luna Gunship brings areal support to the battle group, using its Huntsman Cluster and Starglaive Pair. It can also me built as a Hecate Target Support Craft, this variant has a scanner that it can use to identify key targets. Finally it brings 2 Neptune Dropships that allow for the walkers to be swiftly deployed to the field.

Contains 7 resin miniatures and 3 clear acrylic flight stand.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

For speed over rough ground the resistance have nothing better than the Attila Trackwalkers, the adaptability of these vehicles to the terrain around them is unequal. Packing short range lethal firepower that can crack the hulls of the heaviest tanks, the Trackwalkers are the bane of any vehicle that gets in there way.

An Armour Battlegroup is a staple in games of Dropzone Commander, and is a required choice in every army. This set contains all compulsory choices in the Armour

Battlegroup, with Auxiliary units for support. This box is ideal for a new player - if you have a Starter Army, expand your force with this box.

3 Attila Trackwalkers cover ground with ease, while equipped with Welding Clamps, these industrial vehicles have a nasty close-range attack. They are also armed with Anti-Material Guns for when you don't need to reach out and touch tanks. They are reinforced by a Circe Attack Hovercraft that can lay waste to the heaviest armoured vehicles, or it can be assembled as the Hydra Relay Hovercraft. Excellent air support comes in the form of 2 Cyclone Attack Helicopters and a Tempest Interceptor, no enemy can hide from the sights of these agile fliers.

Contains 8 resin miniatures and 3 clear acrylic flight stands.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

While the Scourge are fully able to produce anti-gravity skimming vehicles on demand, UCM scientists believe that legged constructs are preferable for Scourge implantation despite their inherent drawbacks.

An Armour Battlegroup is a staple in games of Dropzone Commander, and is a required choice in every army. This set contains all compulsory choices in the Armour

Battlegroup, with Auxiliary units for support. This box is ideal for a new player - if you have a Starter Army, expand your force with this box.

Making the core of this Amoured Battlegroup is 2 Ravenor Laser walkers, these are equipped with Standoff Energy Clusters which can deal devastating damage to targets at close range. Alternatively they can be assembled as the Afflictor Hive Walkers, these project out pheromones' that attract swarms of insects that bog down any foolish enough to move through their swarm. The large support of the Battlegroup is the Subjugator Arthropod who slow down any nearby enemy units, it can also be built as an Oppressor Command Arthropod. The anti-air support comes in the form of 3 Ravager AA Beetles or can be made for anti-tank as the Stalker Beetle variant. Finally the battle group are transported in by a Harbinger Dropship.

Contains 7 resin miniatures and 1 clear acrylic flight stands.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

The Widow is a peculiar walker, it is lightly armed and armoured but capable of scaling buildings similarly to the Tarantula. Its mirror panels provide it with a modicum of protection, making it appear where it is not and obfuscate where it is. Bradyon Carbines are light weapons designed to go against infantry and light vehicles, but weight of fire can overwhelm even heavily armoured vehicles.

An Armour Battlegroup is a staple in games of Dropzone Commander, and is a required choice in every army. This set contains all compulsory choices in the Armour

Battlegroup, with Auxiliary units for support. This box is ideal for a new player - if you have a Starter Army, expand your force with this box.

The 2 Widow Battlewalkers scramble over the battlefield, using their Bradyon Carbines to crack open any armour that crosses their path. Alternately they can be built as Recluse Mirrostriders and defend allied units nearby. A Jaguar and Leopard Warstrider provide versatile firepower. The Dreamsnare Shieldstrdier protects its allies with its Shield Boosting Relay. the 2 Zion Gates give a stable position where units can teleport in and out of the battle.

Contains 7 resin miniatures.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

One moment the entire building was about to keel over with us in it. Then all of a sudden we were told to get away from the windows. I thought for sure it was another blast of plasma from one of those Scourge tanks. Turns out it was some foamy concrete stuff the eggheads had whipped up to shore up structures. Sure glad it worked, but I'm less impressed that the Palazzo looks like a lumpy potato now.

An Armour Battlegroup is a staple in games of Dropzone Commander, and is a required choice in every army. This set contains all compulsory choices in the Armour

Battlegroup, with Auxiliary units for support. This box is ideal for a new player - if you have a Starter Army, expand your force with this box.

3 Katana Light Tanks can bring varied fire power to either deal with Tanks via its Twin Cannon or can incinerate infantry with the Flame Thrower. The Jackal LAV's can crack open light tanks with there Requiter Organ Guns. These can also be assembled as the Dingo LAV's which are designed to repair buildings with reinforced cement. Raining Fire down the enemy from afar is the Longbow Howitzers or can be built as the Crossbow Laser Artillery. This Battlegroup is transported by 2 Titania Ravens and a Titania Condor.

Contains 10 resin miniatures and 3 clear acrylic flight stands.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

The Ferrum Falcon is light ground attack craft, designed for close air support missions. Built around the Ferrum Raven dropship chassis, the Ferrum Falcon is able to loiter over the combat zone, presenting a constant threat to enemy ground units. It shares considerable commonality with the Ferrum Raven, reducing construction costs and simplifying maintenance.

The Ferrum Falcon is just as fast and manoeuvrable as the Raven, although it is also lightly armoured. This makes it best employed against unfortunate, defenceless ground targets.

The Ferrum Falcon Gunship is armed with Twin Miniguns. These have been calibrated for focused, converging fire. The sheer volume of lead these shell-hoses can send downrange is capable of shredding a main battle tank in seconds.

Alternatively the Ferrum Falcon Gunship can be armed with AP/AA Missiles. These provide versatile anti-tank and anti-air firepower. A great addition to any army going against any foe whether they have land or air units.

Contains 2 multi-part resin miniature.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

The Ferrum Raven is a high speed light transport, able to conduct operations far ahead of the main force. Its primary role is to drop scout units quietly near targets of opportunity, often behind enemy lines. Its small size and high manoeuvrability makes it extremely capable in the tight, urban dropzones which may preclude the use of its lumbering cousins.

The Ferrum Raven’s high combat speed and small size does, however, come at the cost of low protection. Prudent commanders only utilise its talents in the manner for which it was designed, avoiding frontline operations.

The Ferrum Raven Troopship has a capacity of 10 infantrymen. When there are time critical objectives waiting to be taken, there is no better choice of transport.

The Ferrum Raven Dropship can carry a pair of Wolverine scout buggies as it was designed concurrently with the Wolverine to create the perfect rapid reaction partnership.

Contains 2 multi-part resin miniature.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.