You will encounter many crossroads in life, so a tabletop seems just as fitting.

The Pitchstone Crossroads contains 2 buildings both are a fantastic addition to a Wild West themed table top, along with it's eye catching aesthetic. It promotes loads of playability features such as a removable roofs, allowing for interior playing. Alongside this the flat roofs allow for another surface to be played upon.

The Pitchstone Crossroads is made from 3mm MDF. It is a great scenery kit to use in Wild West skirmish games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

A bit of shopping, a casual hanging for the angry mob, Main Street has it all

The Pitchstone Main Street is big enough for at least two cowboys. It consists of 3 buildings, a set of gallows and a selection of crates. All 3 buildings follow the same design philosophy by having removable roofs allowing for interior playable areas. Alongside this the sloped roofs have been play tested to find the perfect angle for models to perch on whilst not slipping down the building.

The Pitchstone Main Street is made from 3mm MDF. It is a great scenery kit to use in Wild West skirmish games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Pitchstone has been known for it's showdowns, heists and general dodgy dealings. The Undertakers, the Sheriffs office and the trading post have all seen a bit to much attention.

The Pitchstone Municipal contains 3 buildings. All of which are a staple to any Wild West tabletop. Not just for it's fantastic aesthetics, It promotes loads of playability features such as a removable roofs, allowing for interior playing. Alongside this, the flat roofs allow for another surface to be played upon. The window ledges have been designed to provide ample line of sight for your miniatures.

The Pitchstone Municipal is made from 3mm MDF. It is a great scenery kit to use in Wild West skirmish games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

No better place to kick back and relax than in the Saloon, playing some cards, shooting some cheats and having a relaxing evening

The Pitchstone Saloon consists of 2 buildings. Both promote loads of playability features such as removable roofs allowing for interior skirmishes, slightly angled roofs allowing for models to perch safely without the fear of sliding off whilst still using the surface as a playable area.

The Pitchstone Saloon is made from 3mm MDF. It is a great scenery kit to use in Wild West skirmish games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

These shrines pay respect to the kami that reside here.

This set contains three small Hokora, perfect little scatter details for a residential area on a board or part of a larger temple complex.

The Hokora are made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy or modern wargames games, and will work perfectly with 28-32mm miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Hear the Taiko drums announce the start of tonight's performance. The kabuki is about to start.

This set contains one Kiyomori stage and two Ema boards, perfect for creating a theatre centrepiece to a village on your board.

The Kiyomori Stage is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy or modern wargames games, and will work perfectly with 28-32mm miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Fetch the Sake from the storehouse, we're having a party!

This set contains one Kura storehouse, a medium sized two storey building complete with sake barrels! A great addition to a residential area on a board.

The Kura storehouse is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy or modern wargames games, and will work perfectly with 28-32mm miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

A cute little townhouse, selling wares on the busy streets.

This set contains one small Machiya Shopfront, a great kit if you want to add some different commercial buildings to your built up residential area.

The small Minka is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy or modern wargames games, and will work perfectly with 28-32mm miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The soft glow of the lanterns frame the beautiful arch of this bridge.

This set contains two bridges and five lanterns, great for adding some thematic detail to a zen garden or a palatial estate.

The Bridge and Lanterns are made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy or modern wargames games, and will work perfectly with 28-32mm miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Do you think this Pagoda could do with being taller?

This set provides a single storey expansion to the Yu Pagoda.

The Pagoda Extension is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy or modern wargames games, and will work perfectly with 28-32mm miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Designed to be used with the Yu Pagoda.

The koi splash about under the blooming lotus flowers, eagerly waiting for feeding time.

This set contains two ponds, perfect for providing your board some detailed thematic scatter.

The ponds are made from 3mm MDF and 3mm Blue Acrylic. It is a great scenery kit to use in fantasy or modern wargames games, and will work perfectly with 28-32mm miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

A quaint little house for a quaint little village.

This set contains one small Minka, perfect for period housing to create a residential area on your board.

The small minka is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy or modern wargames games, and will work perfectly with 28-32mm miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

A modest abode, home to a respectful and honourable family.

This set contains one small Minka, a slightly larger design variant compared to Minka A. A great addition to any residential area on a board.

The small Minka is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy or modern wargames games, and will work perfectly with 28-32mm miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Perfect construction for an even more perfect home.

This set contains one small Minka, perfect for period housing to create a residential area on your board.

The small Minka is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy or modern wargames games, and will work perfectly with 28-32mm miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The trickle of water and ritual chanting. A town Temizuya to purify ones self.

This set contains one Temizuya. The removable roof allows for easy access to the playable space on the inside. This kit would make an excellent addition to any temple complex.

The small Temizuya is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy or modern wargames games, and will work perfectly with 28-32mm miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Step through the spiritual gates of heaven, be reborn and follow the way of the warrior.

This set contains two Torii gates, perfect for framing temple sites or to decorate a pathway.

The Torii gates are made from 3mm MDF. It is a great scenery kit to use in fantasy or modern wargames games, and will work perfectly with 28-32mm miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The wet boards can be slippy, watch your step or you'll end up in the drink.

This set contains eight wooden walkway sections. Great to add that extra bit of detail to a rice paddy or across shallow stretch of water.

The walkways are made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy or modern wargames games, and will work perfectly with 28-32mm miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The only thing taller than these walls is our Samurai's devotion to their lord!

With four corners, six straights and two gates this kit provides enough walled sections to complete a sizable fortification.

The Yagura Walls are made from 3mm MDF. It is a great scenery kit to use in fantasy or modern wargames games, and will work perfectly with 28-32mm miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Behold, the tower of our Lord, marvel in its magnificence.

This set contains one two storey Yu Pagoda, a great centrepiece for any eastern themed board!

The pagoda is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy or modern wargames games, and will work perfectly with 28-32mm miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Yu Pagoda works well wit the Pagoda Extension.

This kit is comprised of 119 plastic components, with which you can build:

• - 2x STC Hab-bunker
• - 6x Stockades
• - 2x Stockade with Doors
• - 1x Landing Pad
• - 1x Vox-Antenna
• - 1x Auspex Shrine

The set also includes two double-sided folding gaming boards measuring 30" x 22.4", allowing you to build a battlefield suitable for Combat Patrol or Incursion games of up to 1000 points in Warhammer 40,000. These durable boards depict the debris-strewn wasteland of the Imperial frontier on each side, and can be combined with other gaming boards to create battlefields of any size.

These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel paints.