Every self respecting hive city needs a massive smokey power plant and these big towers fill that role expertly. Try not to inhale any thing coming out of it if you can.

At approximately 27cm tall it's perfect for 28-32mm scale gaming in any hive or otherwise apocalypticly ravaged world. Made from 3mm MDF, it's easy to put together and look greats on the tabletop.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Miniature not included and for scale only.

Are you sick of getting shot up all live long day? So many walkways around here and not enough cover? You need CoverTEC! The CoverTEC walkway is designed with YOUR safety in mind!

At approximately 7cm tall it's perfect for 28-32mm scale gaming in any hive or otherwise apologetically ravaged world. Made from 3mm MDF, it's easy to put together and look greats on the tabletop.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

Every post apocalyptic hive city needs some good office space for administration and proper organisation. How often they get shot up is neither here nor there. This walkway is only half covered just in case you only need partial storage solutions.

At approximately 7cm tall it's perfect for 28-32mm scale gaming in any hive or otherwise apologetically ravaged world. Made from 3mm MDF, it's easy to put together and look greats on the tabletop.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

A nice place for a little rest in between shooting and getting shot.

At approximately 7cm tall it's perfect for 28-32mm scale gaming in any hive or otherwise apologetically ravaged world. Made from 3mm MDF, it's easy to put together and look greats on the tabletop.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

Is your hive city running out of power and walkway space? Well, you're in luck because this power generator comes with built in walkways. Just try not to puncture the reactor with small arms fire, what comes out smells really bad, it also melts through anything it touches...

At approximately 12cm tall (15 with barricades) it's perfect for 28-32mm scale gaming in any hive or otherwise apologetically ravaged world. Made from 3mm MDF, it's easy to put together and look greats on the tabletop.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

This charming little walkway blows hot stinking air from the lower levels right past where you will be walking. Where better to place something like that?

This kit comes with interchangeable Vats and Fans, the Vat section has locator tabs to join onto the INH019 Industrial Chem Vat. At 10cm tall for the Vats and 2.5cm for the fans it's perfect for 28-32mm scale gaming in any hive or otherwise apocalypticly ravaged world. Made from 3mm MDF, it's easy to put together and looks great on the tabletop.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Miniature not included and for scale only.

Every filthy hive needs a little office space, to sort logistics and store paperwork. It's a shame that they get used more for bunkers and firing holes than anything worthwhile.

This kit comes with interchangeable Office and Grate section. At 7cm tall for the Vats and 2.5cm for the fans it's perfect for 28-32mm scale gaming in any hive or otherwise apocalypticly ravaged world. Made from 3mm MDF, it's easy to put together and looks great on the tabletop.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Miniature not included and for scale only.

If your hive city is running out of space, where better express all of that toxic gas than right next to where people are walking?

This kit comes with interchangeable Vent part and Barrels. At approximately 5cm tall it's perfect for 28-32mm scale gaming in any hive or otherwise apocalyptic ravaged world. Made from 3mm MDF, it's easy to put together and look greats on the tabletop.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Miniature not included and for scale only.

Curved metal gantries provide a connection to stairs allowing access up and down to the higher levels of the hive structure.

This set of gantries and stairs are designed to be compatible with a popular gang based skirmish game. The Walkways kit makes a double height scaffold with stair access, it is a great supplementary set to add more height and access to platform levels of other kits.

All Industrial Hive kits are designed to work together, utilising an innovate clip system to enable every piece to attach to another. Using the in-built modularity you can attach stairs to walkways to platforms to offices to pipes to silos to walls all in a continuous mass of metal (well, MDF) to create literally billions of different board layouts. All this modularity will make your games in the sprawling Industrial Hive more fun than ever.

This kit includes 3 large thin walkways and 2 sets of stairs.

This kit is made from 3mm MDF and has been designed for sprawling games of 28-32mm gang warfare set in a dense jungle of machinery.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Maybe one day our fortunes might change and we could become Slum Block Millionaires.

The Sector 2 Slum Blocks are the ideal piece of kit for your table top, this is due to it containing 5 stackable blocks which allows completely modularity allowing you to stack or space out the blocks in countless ways, allowing you to build vertically or horizonatly or even a combination of them both.

All Industrial Hive kits are designed to work together, utilising an innovate clip system to enable every piece to attach to another. Using the in-built modularity you can attach stairs to walkways to platforms to offices to pipes to silos to walls all in a continuous mass of metal (well, MDF) to make your games in the sprawling Industrial Hive more fun than ever.

This kit is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with modern and futuristic 28-35mm wargames.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Want be a Slumlord? Or maybe a nightmare tenant? Either way this is the kit for you, boasting many modular parts that can be arranged in all shapes and sizes creating a high-rise monolith or a ground level compound.

The sector 2 Slum Complex is perfect for your table top. Why? So many places to hide. So many places for an ambush. the slums might not be the most glamorous but they defiantly have a special place in terms of gamming.

The set is completely modular, allowing you to build up or sideways. You might not be a millionaire but you rule the slum. Also, the modularity allows this kit to be combined with multiple INH kits. Yes you make it even larger then just this one large kit.

This kit is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with modern and futuristic 28-35mm wargames.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included. The set contains:

• 7x Square platforms
• 3x Square platform stairs
• 4x Large platforms
• 6x Small platforms
• 14x Modular supports
• 4x Barricades
• 14x Railings
• 15x Lamp clips
• 2x Pylons
• 12x Lamp clips
• 3x Level clip supports

Want be a Slumlord? Or maybe a nightmare tenant? Either way this is the kit for you, boasting many modular parts that can be arranged in all shapes and sizes creating a high-rise monolith or a ground level compound.

The sector 2 Slum Complex is perfect for your table top. Why? So many places to hide. So many places for an ambush. the slums might not be the most glamorous but they defiantly have a special place in terms of gamming.

The set is completely modular, allowing you to build up or sideways. You might not be a millionaire but you rule the slum. Also, the modularity allows this kit to be combined with multiple INH kits. Yes you make it even larger then just this one large kit.

This kit is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with modern and futuristic 28-35mm wargames.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included. The set contains:

• 7x Square platforms
• 3x Square platform stairs
• 4x Large platforms
• 6x Small platforms
• 14x Modular supports
• 4x Barricades
• 14x Railings
• 15x Lamp clips
• 2x Pylons
• 12x Lamp clips
• 3x Level clip supports

It's said that you can make it from one side of the Delta to the other without ever setting foot on the ground. I mean, if you count "ground" as dirt or grass then that's easy, but it's still not much of a challenge if you mean "large flat piece of metal".

The Sector 3 - Delta Complex is a mass of sprawling walkways, silos, and platforms. Each main piece is made with a circular design, which means the variations you can have on your table are basically endless. With large walkways to attach to your platforms you can make dozens of interconnected railings, especially considering the all the circular pieces can be stacked on top of each other infinitely!

Between the small vats and tall platforms you'll have thousands of options of stacking, and plenty of areas to hide, especially considering the dozens of modular barricades in the kit.

All Industrial Hive kits are designed to work together, utilising an innovate clip system to enable every piece to attach to another. Using the in-built modularity you can attach stairs to walkways to platforms to offices to pipes to silos to walls all in a continuous mass of metal (well, MDF) to create literally billions of different board layouts. All this modularity will make your games in the sprawling Industrial Hive more fun than ever.

The set contains: - 4 Platforms, 3 Half Silos, 5 Large Clip on platforms, 10 Half Walkways, 3 Walkways, 32 Baricades, 2 Ladders, 3 half Ladders.

This kit is made from 3mm MDF and has been designed for sprawling games of 28-32mm gang warfare set in a dense jungle of machinery.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

I bin livin' in the Gamma fer years. Sure there're rats. An' giant rats. An' them giant giant rats. But there ain't no place feels like it. Fer every rat there's a silo full'a gunk, an' if yer catch it at the right time a day, that gunk can boil one a yer rats in a minute flat. It's the best place in the worl' and that's the truth.

The Sector 3 - Gamma Complex is a mass of sprawling walkways, silos and staircases. Each main piece is made with a circular design, which means the variations you can have on your table are basically endless. With large walkways to attach to your platforms you can develop a big raised area, especially considering the all the circular pieces can be stacked on top of each other infinitely!

The silos themselves are impressive pieces of design, making circular vats that block line of sight in games and even have built-in ladders for climbing to the upper levels of Sector 3.

All Industrial Hive kits are designed to work together, utilising an innovate clip system to enable every piece to attach to another. Using the in-built modularity you can attach stairs to walkways to platforms to offices to pipes to silos to walls all in a continuous mass of metal (well, MDF) to make your games in the sprawling Industrial Hive more fun than ever.

The set contains: 2 Spiral staircases, 3 Silos, 5 Half Platforms, 3 Clip on Platforms, 10 half walkways, 2 half ladders, 20 clip on barricades, 4 Free standing double barricades.

This kit is made from 3mm MDF and has been designed for sprawling games of 28-32mm gang warfare set in a dense jungle of machinery.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best re

Where do silos go to meet up, have a drink and hang out? They're too old for a youth club, and not sporty enough for a cricket club. Wait, this isn't that kind of hub? Oh okay.

Connecting three individual silos together with a fancy ventilation machine in the centre, the Sector 3 - Silo Hub occupies a big part of your board. Offering line of sight blocking and multiple levels for gameplay, you can even fit miniatures underneath! The Silo Hub is completely stackable too, able to be used on top or underneath any other bits in Sector 3.

All Industrial Hive kits are designed to work together, utilising an innovate clip system to enable every piece to attach to another. Using the in-built modularity you can attach stairs to walkways to platforms to offices to pipes to silos to walls all in a continuous mass of metal (well, MDF) to create literally billions of different board layouts. All this modularity will make your games in the sprawling Industrial Hive more fun than ever.

This kit is made from 3mm MDF and 1mm greyboard and has been designed for sprawling games of 28-32mm gang warfare set in a dense jungle of machinery.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Those are some balls you got there!

The Sector 3 - Sphere Couplet contains - unsurprisingly - two spheres! These wonders of MDF design are a true marvel, and excellent for your games too! The kit contains two small platforms to attach to them, as well as an optional power conduit to run between and two barricades, offering decent cover to anyone behind. The spheres are completely stackable too, able to be used on top or underneath any other bits in Sector 3.

All Industrial Hive kits are designed to work together, utilising an innovate clip system to enable every piece to attach to another. Using the in-built modularity you can attach stairs to walkways to platforms to offices to pipes to silos to walls all in a continuous mass of metal (well, MDF) to make your games in the sprawling Industrial Hive more fun than ever.

This kit is made from 3mm MDF and 1mm greyboard and has been designed for sprawling games of 28-32mm gang warfare set in a dense jungle of machinery.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Oh jeez *cough* whats that smell?!"

"Erm... it wasnt me boss"

"Switch on *cough* the *cough* vents!"

The Sector 4 - Air Scrubbing Plant brings even more modular pipes and platforms to the range. Small to large pipes and multiple platforms means you can add or expand this with other kits in the Sector 4 range to make the ultimate in all air cleaning kits (or just one really big board!).

There are a bunch of pipes and platforms that all connect to hubs, viewing platforms, containers, vents, reactors and more across the Sector 4 range. Each of these connectors allows you to build your set in many different ways, including plenty of vertical configurations to elevate your games to new heights!

All Industrial Hive kits are designed to work together, utilising an innovate clip system to enable every piece to attach to another. Using the in-built modularity you can attach stairs to walkways to platforms to offices to pipes to silos to walls all in a continuous mass of metal (well, MDF) to create literally billions of different board layouts. All this modularity will make your games in the sprawling Industrial Hive more fun than ever.

This kit is made from 3mm MDF and has been designed for sprawling games of 28-32mm gang warfare set in a dense jungle of machinery.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included. The set contains:

• 3x ground vents
• 1x set of storage tanks
• 9x box connectors (some with platforms)
• 11x pipes
• 9x small pipes and ends
• 2x small stairs
• 1x upright storage tank
• 4x danger end caps

Need a new energy supplier other than the big 6? We got you covered. Our new electron facility is equipped with a state of the art control tower to facilitate delivery of high powered energy to your compound. Best part is that with your own electron facility, you control the price. Kind of.

The Electron facility contains long pipes, short, double length pipes, basically it has all the pipes you need to make a truly realistic industrial playground. Perfect for those games that need a more industrial or futuristic feel.

The set is completely modular, allowing you to build your pipe network in thousands of combinations. Also, the modularity allows this kit to be combined with multiple INH kits. Yes you make it even larger then just this one large kit.

The pieces of the Pipelines have been designed to easily pop together, meaning they don't need gluing so you can use them for different builds each game. Alternatively you can stick them together, making a strong and sturdy pipe network.

This kit is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with modern and futuristic 28-35mm wargames.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included. The set contains:

• 1x Big power station
• 1x Pipe hub
• 11x Boxes
• 4x Double length pipes
• 9x Pipes
• 6x Small pipes
• 3x Pipe spacers
• 4x Tesla plug in end caps
• 3x Broken end caps

Do you have lots of air around that you don't want around anymore? Then you need the Industrial Mega Turbine! Its massive fan blades can move so much air, you don't even know how much it's so mega.

The Sector 4 - Mega Turbine is a massive fan that will take up a large section of any gaming board. Lavishly detailed with multiple levels that make it ideal for gaming, the Mega Turbine has two sets of modular stairs which are completely compatible with the rest of the Industrial Hive range. Being a Sector 4 kit, the Mega Turbine also has two pipe connectors, so you can transport that air around as much as you like using the Pipelines!

The Mega Turbine is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with modern 28-35mm wargames.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"If you got liquids or semi-liquids that you gotta need transporting. Our Industrial Sector Pipelines got you a-o-covered. They'll transport your oil, your water, coolant, radioactive waste, regular waste, and all other kinds of junk. If you need what pipes we got, call us on 0118-999-PIPES!"

The Sector 4 - Pipelines contains numerous sections of pipes as well as connectors that allow you to make a large sprawling network of interconnected pipes. Perfect for those games that need a more industrial or futuristic feel.

The set is completely modular, allowing you to build your pipe network in thousands of combinations. With long pipes, short pipes, two types of hub connector (each completely stackable) with loads of attachment points, connectors to create longer pipes (both with and without walkways along the top), and end caps, this kit does a lot of work!

The pieces of the Pipelines have been designed to easily pop together, meaning they don't need gluing so you can use them for different builds each game. Alternatively you can stick them together, making a strong and sturdy pipe network.

The Sector 4 - Pipelines are compatible with all the other Industrial Hive kits, and every kit in the Sector 4 range has points to connect them, meaning you can make a sprawling network between buildings, pipe hubs, and more! They're also designed to fit well with the rest of the Industrial Hive range, stacking vertically to the same height as the other kits, meaning cross-builds are easy and effective.

The set contains:

14 pipe sections

6 small pipe sections

6 hub blocks

4 curved hub blocks

6 raised connectors

6 lower connectors

3 end caps

4 spacers

This kit is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with modern and futuristic 28-35mm wargames.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.