The musty smell and gentle dripping is the first to meet your senses as you descend into the cavern, our eyes slowly adjusting to the light. What encounters await you inside...

The Cavern Dungeon is a large modular tile set allowing you to set up your battle map differently each time. Stone walls and floors surround a sizable underground lake. each section has 25mm/1" squares hidden amongst the stone so you can use this kit for table top roleplaying or skirmish wargames.

This kit is made from 3mm MDF working well with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and not included.

The choir have long since left and the convent bell tolls no more.

The Ruined Convent Cathedral contains 1 large ruined section, 1 medium ruined section and 4 small ruined section.

These ruins provide a large centrepiece for you Convent board with points to connect it to the rest of our Convent range. It has a high point for added range and partially destroyed sections to give your troops cover.

This kit is made from 3mm MDF. It is a great scenery kit to use in sci-fi skirmish games and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. Miniatures not inclueded We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"The ancient chapel sits alone and empty, the parishioners long since gone."

The Sacrosanct Ruins combine together to create one large chapel building or can be used apart giving in four ruined corner sections. Each individual section has a floor design that allows it to be slotted into other buildings with the same floor design. The exterior of the buildings have the same slots to allow connectivity with other savage domain kits.

The Ruins are made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"The downside of constructing houses on uneven land is that each estate needs to be built up on stable foundations."

The Tumbledown City Risers provide elevation to your gaming board. The blocks are large enough to give ample space for buildings, as well as the same slots to allow connectivity with other savage domain kits.

The Risers are made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"These once luxurious mansions were home to the great and the good of the city, now they lie in ruins."

The Tumbledown Manor is a modular set of ruined houses that can be combined into one large housing block or used apart to make a more spacious ruined suburb. Each individual building has a floor design that allows it to be slotted into other buildings with the same floor design. The exterior of the buildings have the same slots to allow connectivity with other savage domain kits.

The Manor is made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Designed to work with the Demonship rules written by Malev. This kit is all you'll need to start getting prepped for your games. [NOTE] This is NOT the rules for playing Demonship. Those are found in the Demon Ship starter box.

This kit will include

• 2x 1by3
• 1x 1by2
• 1x 1by1
• 1x 2by2 platform
• 1x switch
• 2x doors
• 2x barrels
• 2x hatches

"The ruined fortress lays before us. Be wary as it may now be home to bandits."

The Frozen Keep is a medium sized kit with space to connect it to the existing castle walls as well as all the other savage domain kits. The height of the keep allows for verticality over other nearby terrain pieces and the walls provide line of sight blocking.

The Keep is made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Platform now silent, the ruined bandstand sounds of music no more."

The Pavilion Bandstand is a small kit designed to be set dressing and add a bit of visual interest on your larger savage domain layouts.

The Bandstand is made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Looks can be deceiving. Though it appears empty, a sorcerer's glamour spell lies over this place, masking its true form."

This Multipart kit can create a modular structure or be used as many individual buildings. Each individual building has a floor design that allows it to be slotted into other buildings with the same floor design. The exterior of the buildings have the same slots to allow connectivity with other savage domain kits.

The Sorcerer's Redoubt is made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Sad state of affairs when the state just expects you to process yourself..."

Cuts have been made everywhere, now the law is in your own hands with this Process Unit. That's right, if you have committed a crime you are actually expected to turn yourself in for processing.

The Process unit is made from 3mm MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"You can't go straight on, but at least you can turn left now."

Junctions, for when your traffic control needs to be a little more succinct than just "do not pass". 

The SLAB Streets Barriers kit is made from 3mm MDF. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"Seriously where does our tax money go?"

Yes, you really are expected to clean up after yourselves once you've finished "cleanin up the streets". Cartridges in the bins, please. 

The Wastestation is made from 3 MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"It was supposed to be a pentagon, but corners were cut"

The Octo Pod Consortium is a fantastic set for any Sci-Fi tabletop, it is fully modular with the rest of the Octopod kits allowing for the pods to be extended to infinite heights alongside this the Consortium can be set up as a Sci-Fi outpost which can be stacked high or expanded out.
The Octo-pod Consortium kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

This Kit is supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and are not included. The Consortium Features:

• 4 Octopods
• 1 Octopod stairway
• 1 Octopod Square base
• 2 Walkways
• 1 Ladder
• 5 barricades
• 2 Drums
  

"I was just thinking 'how do I get up there?' Now I know."

The Slab Hab Access and Walkways kit is the kit you need for your towering constructions or sprawling buildings in SLAB City. Giving you different access points and alternative walkways, this kit provides multiple layout variations within the SLAB range.

The SLAB Hab range is a super flexible range that can quickly fill up your game table! Stackable and joinable with the walkways and access point kit, you can build towering slums or a sprawling city. The range is quick to build so you can have tournaments and games running in no time.

The SLAB Hab Small kit is made from 3mm MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"So much room for activities"

The large SLAB Hab, is a show of force. Whilst you may want to show your entire army off on the spacious roof, it's not recommended. Featuring secure walkways, stairways, and rooftop barricades. The large Hab is a spacious building, capable of holding a large army and is a great building block for stacking other Hab Buildings onto it.

The SLAB Hab range is a super flexible range that can quickly fill up your game table! Stackable and joinable with the walkways and access point kit, you can build towering slums or a sprawling city. The range is quick to build so you can have tournaments and games running in no time.

The SLAB Hab Small kit is made from 3mm MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"Time to hunker down and stand our ground"

The medium SLAB Hab is a great stronghold for a dwindling force. Featuring secure walkways, stairways, and rooftop barricades. The medium Hab is the home away from home when you're on the run. 

The SLAB Hab range is a super flexible range that can quickly fill up your game table!  Stackable and joinable with the walkways and access point kit, you can build towering slums or a sprawling city. The range is quick to build so you can have tournaments and games running in no time. 

The SLAB Hab Small kit is made from 3mm MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"In today's economy, this is practically a mansion"

The small SLAB Hab is the ideal extension to your existing buildings within the SLAB Range. Featuring secure walkways, stairways, and rooftop barricades. It's like a small mini fortress. 

The SLAB Hab range is a super flexible range that can quickly fill up your game table!  Stackable and joinable with the walkways and access point kit, you can build towering slums or a sprawling city. The range is quick to build so you can have tournaments and games running in no time. 

The SLAB Hab Small kit is made from 3mm MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"Wherever you want to go, I can take you there."

Capable of supporting four MULE modules or alternatives, The MULE Core is quite literally the core building block for thousands of cities across the federation. Endlessly stackable, Core towers constantly grow higher and higher as the city expands, and no citizen is ever at the top for long.  

The M.U.L.E Core kit is made from 3mm MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"I sure do hope that glass is bulletproof..."

Look, it's a hostile environment out there and we don't expect you to step outside but stairs take up too much room, therefore we've spent a fortune on these grav-lifts. Height is no issue* (*This has been untested) so as high as your structure goes, so do these!

The M.U.L.E Exterior Lift is made from 3mm MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.