The sky's the limit, so why not have a way of getting there?

The Octo Pod Skyway is a fantastic piece for any Sci Fi table top, it is fully modular with the rest of the Octo Pod kits allowing for the pods to be extended to infinite heights. The Skyway features a single octo pod as well as an octo pod encorperated with a stairway allowing you to scale the pods.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Heard from Gazza in sector 4, that this tower can be stacked to reach the stars

The Octo Pod Tower is a fantastic piece for a Sci Fi table top, it is fully modular with the rest of the Octo Pod kits allowing for the tower to be extended to infinite heights. The tower itself promotes vast amounts of line of sight blocking as well as a neat vantage point over the battlefield.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The Plasma Defence Platform is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with Infinity, Halo: Ground Command, and 28-35mm wargames. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Any models shown in the photos are for scale only and not included.

The Plaza Complex is the perfect centrepiece for your Infinity set up.

The Plaza Complex has surrounding walls to take cover behind and a futuristic sculpture in the centre.

The plaza base is made from four corner pieces and the centre statue sits on the top, this makes it easily store-able and also means its usable as four separate plinths to add extra cover to your infinity board.

In partnership with Corvus Belli, the Plaza Complex is designed for Infinity.

The Plaza Complex is made from 3mm MDF, 1mm greyboard, and 3mm acrylic. It is a great piece of scenery to use on the tabletop for Infinity and will work perfectly with other 28-32mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Prefab Alpha is a two story futuristic block.

This prefab block comes with a raised section so the storeys can sit at 90 degrees from one another.

It has a bridge to connect to other buildings in this range, a small fan and a roof with a overhanging octagonal corner great for taking cover.

In partnership with Corvus Belli, Prefab Alpha is designed for Infinity.

Prefab Alpha is made from 3mm MDF and 1mm greyboard It is a great piece of scenery to use on the tabletop for Infinity and will work perfectly with other 28-32mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Prefab Beta.

Prefab Beta is a two storey block with a entrance surround double doors futuristic solar panel pylon and a air con unit for the roof.

Prefab Beta is part of the stack-able prefab range and can be used in conjunction with other buildings in this range to make a block that suits your gaming board.

In partnership with Corvus Belli, Prefab Beta is designed for Infinity.

The Prefab Beta is made from 3mm MDF and 1mm greyboard. It is a great piece of scenery to use on the tabletop for Infinity and will work perfectly with other 28-32mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Prefab Chems Lab is a two story facility.

This Chems Lab comes with a futuristic roof, two doors and a vending machine.

The Prefab Chems Lab fits other products in the prefab range so you can create an interesting block to suit your battle ground.

In partnership with Corvus Belli, Prefab Chems Lab is designed for Infinity.

Prefab Chems Lab is made from 3mm MDF and 1mm greyboard It is a great piece of scenery to use on the tabletop for Infinity and will work perfectly with other 28-32mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Prefab Complex.

The Prefab Complex is a built up city block, with three large sections and three domestic pods, and features balconies, ladders, an air con unit and a solar pylon.

Prefab Complex features a platform and a bridge so you can configure the sections into an interesting block that suits your gaming board.

In partnership with Corvus Belli, The Prefab Complex is designed for Infinity.

The Prefab Complex is made from 3mm MDF and 1mm greyboard. It is a great piece of scenery to use on the tabletop for Infinity and will work perfectly with other 28-32mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Prefab Housing Pods.

Prefab Housing Pods are individual domestic units with balconies, double doors and a ventilation system for the roof.

Prefab Housing Pods are part of the stack-able prefab range and can be used in conjunction with other buildings in this range to make a block that suits your gaming board.

In partnership with Corvus Belli, Prefab Housing Pods is designed for Infinity.

Prefab Housing Pods are made from 3mm MDF and 1mm greyboard. It is a great piece of scenery to use on the tabletop for Infinity and will work perfectly with other 28-32mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included

The Railgun Defence Platform is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with Infinity, Halo: Ground Command, and 28-35mm wargames. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Any models shown in the photos are for scale only and not included.

The Ruined Gravity Lift is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with Infinity. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results. Contains 2 x Ruined Gravity Lift sections.

This has to be the most convenient shopping centre around, you can have a nice drink, grab some ramen and why not pick up some ammo whilst your at it.

In partnership with Corvus Belli, The Shopping Centre is designed for Infinity.

The set contains four modular buildings that can be combined to make one large complex. They can be put together in loads of ways, meaning your board need never look the same twice! Each building is fully detailed, meaning you can alternatively use them as four separate terrain pieces. Each has a removable roof for easy gameplay.

The Shopping Centre is made from 3mm MDF, 1mm greyboard, and 3mm acrylic. It is a great piece of scenery to use on the tabletop for Infinity and will work perfectly with other 28-32mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

In partnership with Corvus Belli, the Tri Building is designed for Infinity.

The Tri Building has a modular construction meaning that with more than one they can be stacked into higher towers. With each floor being 8.5cm high these buildings are the perfect size for games of Infinity. A "Y" shaped construction means that these buildings can be set up next to one another into a larger houseing complex. This modular kit is incredibly versatile.

The Tri building is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Infinity and will work perfectly with other 28-32mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Either the most lavish residential estate or the most built up housing block, depending on what you do with the structure. Pack 'em in, I say!

In partnership with Corvus Belli, the Tri Building Complex is designed for Infinity.

This set of 6 buildings and walkways push up to one another to form a continuous ring or a snake of any design. The Walkways provide shelter for your units as well as a raised firing position and the buildings provide more substantial interior cover.

Its stackable construction means that with more than one buildings and walkway you can create larger tower block structures to mix up your gaming and provide some interesting verticality.

The Tri Building Complex is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Infinity and will work perfectly with other 28-32mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

In partnership with Corvus Belli, the Tri walkway is designed for Infinity.

The Tri Walkway has an open design allowing models to be moved underneath. It has a modular construction meaning multiple buildings can stack. It uses a "Y" shaped construction means that these buildings can be set up next to one another into a larger complex. This modular kit is incredibly versatile and can be used alongside the Tri Building. With each floor being 8.5cm high these buildings are the perfect size for games of Infinity.

The Tri building is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Infinity and will work perfectly with other 28-32mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The Walkways are made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with 40K and Infinity. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

The Platforms measure 6cm & 12cm high, 6cm wide and 6cm & 18cm long.

Any models shown in the photos are for scale only and not included.

This kit is comprised of 119 plastic components, with which you can build:

• - 2x STC Hab-bunker
• - 6x Stockades
• - 2x Stockade with Doors
• - 1x Landing Pad
• - 1x Vox-Antenna
• - 1x Auspex Shrine

The set also includes two double-sided folding gaming boards measuring 30" x 22.4", allowing you to build a battlefield suitable for Combat Patrol or Incursion games of up to 1000 points in Warhammer 40,000. These durable boards depict the debris-strewn wasteland of the Imperial frontier on each side, and can be combined with other gaming boards to create battlefields of any size.

These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel paints.

This kit is comprised of 38 plastic components, with which you can assemble one STC Hab-bunker, one Stockade with doors, and three Stockades. The modular nature of the kit allows for a variety of other build options – such as a one long Stockade wall integrated into the STC Hab-bunker, or an enclosed Stockade fort.

These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel paints.

This kit is comprised of 36 plastic components, with which you can assemble one Vox-Antenna and one Auspex Shrine.

These miniatures are supplied unpainted and require assembly – we recommend using Citadel Plastic Glue and Citadel paints.

The Hatches are made from resin. They are a great addition to your table top. Designed for 28-32mm wargames.

These are not toys. This set contains small parts. Not for use by anyone under the age of 14.

The pack contains 7 individual pieces, including:

• 3 x Double Sided Hatches
• 2 x Circular Hatches
• 2 x Skull Hatches