Corner ruins are a quintessential sight on the battlefields of the far future and the Hallowed Ruins set contains the finest hand picked corner ruins. With 7 of them, you can use a single set of Hallowed Ruins to fill up a board for one of those smaller team based killy games, or combine multiple for a whole board full of ruins!

The 3 different sizes of ruins provide great variety in terrain. With plenty of windows to shoot out of (or into) as well as multiple storeys there's no shortage of tactical options available with this kit.

This set contains a whole battlefield in one package:

• 1 large cathedral ruin
• 2 large office ruins
• 4 small ruins

This kit is made from 3mm MDF and has been designed for 28-32mm gothic sci-fi games, though would work well in any gothic fantasy setting as well.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The Praetorium Implacable is one of our largest and most imposing kits designed to be used in the wars of the far future. This gargantuan structure has multiple levels and is replete with gothic detailing.

With large open floors, you'll have plenty of space to hide away your squads of power armoured space warriors, or maybe even a flying tank! Each floor is 120mm tall and this monstrous terrain piece has 4 of them.

This building is also a great way of getting a good vantage point for your snipers, the 2 pulpits can handily fit miniatures on bases of up to 40mm and offer a great view of the battlefield far, far below.

This kit is made from 3mm MDF and has been designed for 28-32mm gothic sci-fi games, though would work well in any gothic fantasy setting as well.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

This set provides a selection of ruined, multi level buildings and plenty of additional scenery to scatter around. A single Razed District is a fantastic way of quickly filling out a board with a great variety of terrain. If you're looking for easy and affordable scenery for your games, the Razed District is the perfect first kit, even if you've never made MDF scenery before.

The corner ruins in this set can be left unglued allowing you to store them flat, perfect for those of us with too much scenery to store. Small tabs on each of the floors let the ruined building sections stack, giving you a bit more height and visibility over the battlefield. The top floors lock into place so you can decide on taller or shorter ruins each game, and disassemble them afterwards for the next fight.

Walls and shipping containers make for much needed line of sight breaks, while scattering the barricades, dragons teeth, and tank traps helps make areas of the battlefield more infantry friendly.

This set contains a whole battlefield in one package:

• 4 large corner ruins
• 4 small corner ruins
• 2 shipping containers
• 3 broken walls
• 5 barricades
• 2 tank traps

This kit is made from 3mm MDF and has been designed for 28-32mm gothic sci-fi wargames, though could easily be used in other sci-fi settings.

The Razed Mercantine was designed as a versatile set of corners that can be used alone, or as a single building. Each section is able to slot into place to make the full building with plenty of space inside for all manner of infantry.

As standalone sections each part has plenty verticality and wall space to secure your troops behind. One of the sections even has most of its sign remaining, letting you put your own stamp on what kind of merchant used to sell their wares here.

This kit is made from 3mm MDF and has been designed for 28-32mm gothic sci-fi games, though would work well in any gothic fantasy setting as well.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The Convent Ruins is a multipiece kit, that would look great on your war table! Whilst once a home of prayer, it's now the place to hold the line with your troops! Each part offers excellent line of sight blocking and with extra floors, you can gain the holy ground, aka the high ground! Consisting of multiple structures, this kit is perfect to be condensed as one building or spread out to cover more of your board! The decision is yours.

All the Convent kits are modular, designed to be used together in thousands of different ways. The kits are made up from middle and end pieces, which simply push up next to each other, locking together very simply. In this way you can make sprawling connected buildings to hide behind or occupy, and then take them apart again for easy storage after the game is over.

The Convent Pulpit is made from 3mm MDF, is easy to put together and looks great on the tabletop. Perfect scenery to use with sci-fi 28-35mm wargames.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The Sector 2 - Slum Shanties set contains four individual pod buildings, stairs and various walkways to connect them.

The set is completely modular, allowing you to build your own shanty town in any way want. The buildings stack on top of one another as well as being able to connect side by side with the walkways, giving you the choice to build tall or build wide. The hab-pods have been designed with playability in mind, there is enough room on the gantries to move your models around with the angles of the buildings providing cover as well as adding to the warren like feel of this kit.

The Sector 2 - Slum Shanties are compatible with all the other Industrial Hive kits, and the buildings in every kit in the Sector 2 range are stackable and connectable, meaning you can make a sprawling network of buildings, sky scrapers and more! .

The set contains:

• 2 Square platforms with a Triangular base
• 2 Triangular platforms with a square base
• 2 Stair sections
• 1 Pylon
• 2 Large platforms
• 2 Small platforms
• 12 Railing clips
• 1 Barricade
• 6 Modular supports
• 4 Lamp clips

This kit is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with modern and futuristic 28-35mm wargames.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included. Find Tabletop Scenics Instructions at TTCombat.com

The Sector 2 - Slum Warren is perfect as the ground floor to a sprawling city above. Its modular, stackable and triangular platforms are vertically compatible with the other Sector 2 kits and horizontally compatible with the rest of the INH range. Enabling you to create a dystopian industrial future city of your choosing.

All Industrial Hive kits are designed to work together, utilising an innovate clip system to enable every piece to attach to another. Using the in-built modularity you can attach stairs to walkways to platforms to offices to pipes to silos to walls all in a continuous mass of metal (well, MDF) to make your games in the sprawling Industrial Hive more fun than ever.

The set contains:

• 8x triangle platforms (2x with Stairs)
• 3x large platform
• 2x small platform
• 16x modular supports
• 3x barricades
• 16x railings
• 15x lamp clips

The Slum Warren is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with modern 28-35mm wargames.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The Ruined Convent Ambulatory is a versatile piece of scenery for your table. With multiples levels and those all important yet convenient remaining walls, these ruins offer plenty of line of sight blocking and ambush point. A great resting point for weary troops regroup!

All the Convent kits are modular, designed to be used together in thousands of different ways. The kits are made up from middle and end pieces, which simply push up next to each other, locking together very simply. In this way you can make sprawling connected buildings to hide behind or occupy, and then take them apart again for easy storage after the game is over.

The Convent Pulpit is made from 3mm MDF, is easy to put together and looks great on the tabletop. Perfect scenery to use with sci-fi 28-35mm wargames.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The Convent Pulpit is a great piece of scenery for your table. Multi-level, barriers for hiding behind and under building hiding spots to. It may be damaged but its far from destroyed. Easy to assemble and perfect for a battle torn tabletop.

All the Convent kits are modular, designed to be used together in thousands of different ways. The kits are made up from middle and end pieces, which simply push up next to each other, locking together very simply. In this way you can make sprawling connected buildings to hide behind or occupy, and then take them apart again for easy storage after the game is over.

The Convent Pulpit is made from 3mm MDF, is easy to put together and looks great on the tabletop. Perfect scenery to use with sci-fi 28-35mm wargames.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The Convent Ambulatory is a great piece of scenery for your table. Not only does it block line of sight for your troops to hide behind, but it also has roof access for gunning down your foes from an elevated position. The set features a removable roof, which means it's easy to assemble. For the interior, some seats are provided and for the exterior, fences. Perfect for cover.

All the Convent kits are modular, designed to be used together in thousands of different ways. The kits are made up from middle and end pieces, which simply push up next to each other, locking together very simply. In this way you can make sprawling connected buildings to hide behind or occupy, and then take them apart again for easy storage after the game is over.

The Convent Pulpit is made from 3mm MDF, is easy to put together and looks great on the tabletop. Perfect scenery to use with sci-fi 28-35mm wargames.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The Convent Pulpit is a great piece of scenery for your table. Not only does it block line of sight for your troops to hide behind, but it also has a raised platform (accessible via steps - none of this ladder nonsense) with barriers for gunning down your foes from an elevated position. Or lecturing them with a sermon - your choice. The set features a removable roof and stage, which means it's easy to assemble and can be spread out to cover even more of your board.

All the Convent kits are modular, designed to be used together in thousands of different ways. The kits are made up from middle and end pieces, which simply push up next to each other, locking together very simply. In this way you can make sprawling connected buildings to hide behind or occupy, and then take them apart again for easy storage after the game is over.

The Convent Pulpit is made from 3mm MDF, is easy to put together and looks great on the tabletop. Perfect scenery to use with sci-fi 28-35mm wargames.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Solid defences and thick walls are as good as another entire regiment of Infantry. Across the known worlds bunkers, foxholes and towers form the backbone of any defensive emplacement, and will make the enemy think twice before attempting to assault it without orbital bombardment or heavy tank platoons in support. Just ensure you have a good supply of ammo and keep firing.

This 28mm - 40mm MDF terrain Warcradle Scenics Omega Defence Scenery Kit is ideal for all your Sci-fi, Gothic and Industrial tabletop games. This set contains nine multi-part buildings;

• 1x Large Bunker
• 1x Small Bunker
• 1x Tunnels
• 1x Barricades
• 1x Fox Hole
• 1x Satellite Array
• 1x Armoured Container
• 1x Walkways
• 1x Watchtower

The Scenery Pack includes a ready-to-play, double-sided printed cardboard scenery (4 Buildings, 4 Holoads, 2 Public Consoles, and 9 Blast Barriers), a Game Mat, and also cardboard Markers, Templates and a measuring tool. Everything you need to start playing!

Contains:

• 4x Buildings
• 4x Holoads
• 2x Public Consoles
• 9x Blast Barriers
• 1x Game Mat
• Cardboard Markers
• Templates
• 1x Measuring Tool

With this expansion pack, you can complement and expand the scenery from your Operation: Kaldstrøm box.

This double-sided 3mm printed cardboard Scenery Pack includes:

• 1x Objective room
• 2x Small buildings
• 1x Sniper tower,
• 1x Console,
• 2x Bridges,
• 2x Staircases, an inner ladder,
• 1x Inner walkway,
• 1x 24x 32 inches paper gaming mat.

This series of sci-fi buildings are ideal for use with any 25mm - 32mm skirmish wargames. With modular buildings and walkways that can all be fitted together, you can build your city the way you want it. All doors open and the walls and ceilings are all removable so the action can continue inside each building - no matter how many levels or how large your structure is!

Hallways allow you to connect the H.A.B's together to construct wider and more complex structures.

This modular 28mm scale Tech City themed Scenery kit contains;

• 1 x Hallway
• 1 x Long Walkways
• Removable Walls/Fences

This series of sci-fi buildings are ideal for use with any 25mm - 32mm skirmish wargames. With modular buildings and walkways that can all be fitted together, you can build your city the way you want it. All doors open and the walls and ceilings are all removable so the action can continue inside each building - no matter how many levels or how large your structure is!

Habitation Modules or H.A.B's are the most common living quarters found in Tech City. Varying in size and luxury, they are often designed to contain a galley, toilet, shower, sleep stations and medical facilities among other things.

This modular 28mm scale Tech City themed Scenery kit contains; 1 x Medium H.A.B, featuring:

• Working doors
• Removable wall panels
• 2x Ladders
• 3x Removable Walls/Fences

This series of sci-fi buildings are ideal for use with any 25mm - 32mm skirmish wargames. With modular buildings and walkways that can all be fitted together, you can build your city the way you want it. All doors open and the walls and ceilings are all removable so the action can continue inside each building - no matter how many levels or how large your structure is!

The Staircase set allows you to connect the H.A.B's together to construct taller and more complex structures.

This modular 28mm scale Tech City themed Scenery kit contains;

• 3x Multi-level Staircases

This series of sci-fi buildings are ideal for use with any 25mm - 32mm skirmish wargames. With modular buildings and walkways that can all be fitted together, you can build your city the way you want it. All doors open and the walls and ceilings are all removable so the action can continue inside each building - no matter how many levels or how large your structure is!

The Walkways are used to add connecting pieces between your buildings to create a large conurbation.

This modular 28mm scale Tech City themed Scenery kit contains;

• 2x Long walkways
• 3x Short walkways
• Removable Walls/Fences