"Collecting the chapters of Tobias Tubthumper!"

Relive Tobias' adventures with the Craggy Bottom Village kit. This kit contains the Halfling Hamlet, Homestead, Barn, Blacksmith, Bridges, Watermill and Windmills.

The Halfling Craggy Bottom Village is made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Chapter 6

Tobias Tubthumper was hungry. He wanted bread for his breakfast, but at this point he'd take anything he could find. His trip to the Windmill had been in vain, but he'd unshackled the goat inside and was trying his best to ride it into town. It buckled and jumped a lot, but he clung on for dear life as it galloped down the road.

Before long they reached the entrance to Deathly Pastures and the goat finally got the better of him. Tobias was thrown clear into the centre of the graveyard, landing with a thud.

He stood up grumbling and looked around. It was clear that something spooky was going on here, and he had no time (or nerve) to face it. The wails whipping past the mausoleums were enough for him to turn tail and run straight out again.

Sooooo spoopy! The Halfling Graveyard is usually the dead centre of a Halfling village. Boom boom! It contains two mausoleums, two fences, a gate, a coffin and a well. It's a great set for detailing your board, or a couple together could make a large graveyard for all your Undead Halflings to enjoy!

The Halfling Graveyard is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Chapter 1

Tobias woke early and yawned. He blinked his eyes open and looked around his modest little house. The Halfling Hamlet of Craggy Bottom was a pleasant place to live, with a few houses and no pesky cockerels to wake him up until the crack of 10.

The Hamlet provides modest homes for your little halflings. Complete with ample pantry space and a large dining area for entertaining. The obligatory round doors face out from the short side of the building giving a long and thin interior living space.

The kit is made from 3mm MDF and 1mm Greyboard. It is easy to put together and looks great on the tabletop with other 28-35mm scenery. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Chapter 5

From the window of her home in Tree Trunk Terrace Margery Thimbletop could see straight out across the rolling fields. She sat on her comfiest cushion, next to the rustic wooden beam and stared out. What she loved about her village was how peaceful it was.

Today however, her cup of tea was interrupted. Birds flew away and the trees rustled as a strange Halfling rushed past her window. He was clinging for dear life onto the back of a goat. Like a flash he was gone, and Margery turned back to her tea.

The Halfling Homestead makes a lovely little grouping of houses for your diminutive chums. The four houses are all uniquely detailed (with round doors of course). They are perfect on their own, or as part of a larger modelling project, like putting them on the side of a hill.

The Halfling Homestead is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Chapter 9

The stream turned out to be more of a brook, Tobias mused. He didn't know much about the difference, but decided that it definitely seemed like a brook. Tobias was pretty clueless about anything that didn't include drumming his favourite tunes. What he did know though was smells.

And he could smell bread.

He sped up into a trot which turned into a run as he saw the watermill in the distance. Skipping across the grass and over the bridge, Tobias rounded on the entrance. He beat on the door before an old Halfling slowly opened it.

"Where's the bread?! I smell it! I want it!" Tobias yelled enthusiastically.

The old Halfling adjusted his glasses and squinted at the excitable figure.

"No bread here, young'un."

"What?! NO! I can smell it!" Tobias was jumping up and down with a mixture of anger and excitement.

Again, the old Halfling took a second to think.

"Ohhhh the smell! I don't even notice it anymore. It's not bread, boy. It's beer. You're welcome to come in and have a drink though."

"Beer?" Tobias was dumbfounded. He'd spent all morning trying to find bread, "Yep, that'll do!"

Halflings drink quite a lot of beer (well, considering their size). You've got to have somewhere to make beer, and it all starts in the Watermill! This massive building (again, considering the size of a Halfling) is decked with lovely detail, and even comes with a bridge to cross the river below.

The kit is made from 3mm MDF. It is easy to put together and looks great on the tabletop with other 28-35mm scenery. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Chapter 4

Tobias crossed Cornwood's farm, seeing that there was nothing there worth having save for a few dozen apples. He finished the last one as he rounded the path to the windmills. Surely there he'd find some bread! Tobias was an excellent drummer, but didn't really know much about the process of making food, thus his enthusiasm. He was slightly taken aback when he entered the grain storage to find nothing but wheat. He was even more surprised upon opening the door to the mill to find a goat milling grain down to flour. He was getting very hungry, and glared at the goat for good measure.

This set contains two large windmills, primary used for milling grain but also to tell if it's windy outside so you can decide to stay in your halfling hamlet next to the fire. Also in this set is the raised grain store, keep your grain high, dry and next to the windmills. No rats can get to it and it speeds up the production of bread, without which sandwiches could not be made.

The kit is made from 3mm MDF and 1mm Greyboard. It is easy to put together and looks great on the tabletop with other 28-35mm scenery. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

The Hunting Lodge is made from 3mm MDF. It is easy to put together and looks great on the tabletop. Great scenery to use with D&D and other 25-28mm games. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

The Malefic Circle is made from 3mm MDF. It is easy to put together and looks great on the tabletop. Great scenery to use with AoS and other 28-35mm wargames. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

''A cool breeze whips through the open doors of this shrine, for only the dead walk here.''

The Necro Shrine pays provide a place of worship to those who venerate the undead. with various deathly details it is a perfect kit for any undead desert boards Tall and squared based it can be used in a variety of ways. This kit is made from 3mm MDF. It is a great piece of scenery to use with 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Some people say it is impossible to visit the Bazaar without spending coin. These people are wrong, they do accept card."

The Oasis bazaar is a great addition to your desert town. It has many levels for your miniatures to climb and provides a great vantage point from which to survey your foes. This kit is made from 3mm MDF. It is a great piece of scenery to use with 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

''Neighbours Noel and Liam do not get on, I'm starting to wonder if walls are enough to separate them''

The Oasis town kit comes with seven buildings that, spread apart, create a sprawling village or can be stacked to give the appearance of a much larger townhouse. Easy to put together these building make good scatter for any desert board. This kit is made from 3mm MDF. It is a great piece of scenery to use with 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The Rusty Blade Tavern is made from 3mm MDF. It is easy to put together and looks great on the tabletop. Great scenery to use with D&D and other 25-28mm games. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Supporting My Chemical Romance on their new tour: Abandoned Abbey! Wait, this is a different Abandoned Abbey?

The Abandoned Abbey is a massive kit containing loads of different ruined buildings, walls, gateways and accessories.

As with all of our Savage Domain kits, the Abandoned Abbey is completely modular, using simple plugs to connect pieces together. You can make long walls, enclosed courtyards, and dense urban environments. Keep the pieces separate for easy storage and to be able to make brand new layouts for each game.

Each of the pieces in the kit follows a strict grid structure too, meaning that it can be used for roleplaying games as well as skirmish games.

Savage Domain: Abandoned Abbey is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"The beacons are lit, ... quickly, use that spiral staircase to put them out, it's a waste of good firewood!"

The Ancient Beacon is a two storey add on to our Savage Domain kits, it is designed to be completely modular, using simple plugs to connect pieces together.

Each of the pieces in the kit follows a strict grid structure too, meaning that it can be used for roleplaying games as well as skirmish games.

Savage Domain: Ancient Beacon is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

There's only one thing keeping us in and them out, and that's these here walls! Yeah sure, half of them are gates, and most of those are rusted open, but it's all about psychology.

The Castle Town Walls are a great kit for making a small patch of a castle town, or for expanding your existing fantasy terrain in an easy way.

As with all of our Savage Domain kits, the Castle Town Walls are completely modular, using simple plugs to connect pieces together. You can make long walls, enclosed courtyards, and dense urban environments. Keep the pieces separate for easy storage and to be able to make brand new layouts for each game.

Each of the pieces in the kit follows a strict grid structure too, meaning that it can be used for roleplaying games as well as skirmish games.

Savage Domain: Castle Town Walls is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The gears of this mechanical monstrosity whir and groan, clanking past one another with metallic bangs. Its axels brought to life with the hiss of steam.

This Mechanical Dias is a great place to stand and observe the inner workings of your magnificent machine. Though please be warned that if you suffer from motion sickness, the gears still do turn.

The sections of this kit form a two storey vantage point that gives a commanding view over the battlefield. You can't win if you don't have the high ground, right? It makes for an excellent defensive position with the addition of the clockwork barriers. A versatile kit it can be a standalone piece or used as an objective.

The Savage Centrewheel Dias is made from 3mm MDF, is easy to put together and looks great on the tabletop. Great scenery to use with modern 28-35mm wargames or diorama's.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Do you think everything is really low to the ground or kept in the middle of the barrel and the sides are empty? How does it work?!"

Containing three buildings, the Cheapside set gives you plenty of scenery to expand your game board. With different levels and lots of cover, this set gives you plenty of spots to fight over.

As with all of our Savage Domain kits, the Cheapside set is completely modular, using simple plugs to connect pieces together. You can make long walls, enclosed courtyards, and dense urban environments. Keep the pieces separate for easy storage and to be able to make brand new layouts for each game.

Each of the pieces in the kit follows a strict grid structure too, meaning that it can be used for roleplaying games as well as skirmish games.

Savage Domain: Cheapside is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"It certainly gives off an air of sophistication!"

"Pretty sure that's just Jimmy, he's not showered in 3 days"

The Coach House set is a two piece kit with multiple levels and access points. This once classy but now crumbling estate has plenty of line of sight and cover. Inside, outside and underneath, your battles will be able to take place anywhere and everywhere.

As with all of our Savage Domain kits, the Coach House kit is completely modular, using simple plugs to connect pieces together. You can make long walls, enclosed courtyards, and dense urban environments. Keep the pieces separate for easy storage and to be able to make brand new layouts for each game.

Savage Domain: Coach house is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included

Who used to live here? A wizard? A fair maiden? Some kind of recluse? Or maybe it was just a tower. Who knows!

The Crumbling Tower is a massive kit containing loads of different crumbling buildings, walls, gateways and accessories.

As with all of our Savage Domain kits, the Crumbling Tower is completely modular, using simple plugs to connect pieces together. You can make long walls, enclosed courtyards, and dense urban environments. Keep the pieces separate for easy storage and to be able to make brand new layouts for each game.

Each of the pieces in the kit follows a strict grid structure too, meaning that it can be used for roleplaying games as well as skirmish games.

Savage Domain: Crumbling Tower is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Derelict Enclave sounds like a dangerous nightclub OR a group of really old guys who like to think they're in a secret society. It's also the name of this MDF kit.

The Derelict Enclave kit is a set of single and two storey ruins, connecting bridges and walkways.

As with all of our Savage Domain kits, the Derelict Enclave is completely modular, using simple plugs to connect pieces together. You can make tight street corners in a dense urban centre or a more exposed cloister. Keep the pieces separate for easy storage and to be able to make brand new layouts for each game.

Each of the ruins and walkways follow a strict grid structure too, meaning that it can be used for roleplaying games as well as skirmish games.

Savage Domain: Derelict Enclave is made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.