Tamiya Extra Thin Cement Quick-Setting 40ml
Plastic Glue

Tamiya Extra Thin Cement 40ml

Plastic-Cure Odorless Brush-On Gap Filling Cyanoacrylate 1/2 oz

Gap filling medium. 5-10 second glue. Cyanoacrylate. 56 grams. Remove cap and cut off end of tip while holding bottle upright. Apply glue to one surface, then hold parts tightly together for 10 seconds. Wipe tip with a paper towel and replace cap. Full strength is reached in two hours.

Gap filling medium. 5-10 second glue. Cyanoacrylate. Remove top and take out inner seal. Replace top. Twist cap 180 degrees to open, then gently squeeze CA glue into a smaller bottle. Close cap. Using the smaller bottle, apply Insta-Cure+ to one surface, then hold parts tightly together for 5-10 seconds. Store 8 ounce bottle in refrigerator to ensure longest shelf life.

Extra thick 10-25 second glue. Cyanoacrylate. 56 grams. Remove cap and cut off end of tip while holding bottle upright. Apply glue to one surface, then hold parts tightly together for 25 seconds. Wipe tip with a paper towel and replace cap. Full strength is reach in three hours.

Extra thick. 10-25 second glue. Cyanoacrylate. Remove top and take out inner seal. Replace top. Twist cap 180 degrees to open, then gently squeeze CA glue into a smaller bottle. Close cap. Using the smaller bottle, apply Maxi-Cure to one surface, then hold parts tightly together for 25 seconds. Store 8 ounce bottle in refrigerator to ensure longest shelf life.

SUPER-GOLD™ Thin is our odorless foam safe CA. It is non-frosting and take only 2 or 3 seconds longer to bond compared to Insta-Cure. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic.

SUPER-GOLD™ Thin is our odorless foam safe CA. It is non-frosting and take only 2 or 3 seconds longer to bond compared to Insta-Cure. There are no fumes that irritate the nose and eyes. The SUPER-GOLD™’s do not attack white foam; therefore, they can be used in the building of foam core wings and the assembly and repair of plastic and foam ARF’s. They will not fog clear plastic.

Warcradle Scenics Plastic Glue is a high quality, thick glue. It is perfect for assembling plastic miniatures of all shapes and sizes.

Simply apply a small amount of glue to one side and press the parts together, the plastic glue will do the rest!

One 20g bottle of Warcradle Scenics Plastic Glue supplied.

Please note: This product is flammable, keep it away from open flames and heat sources. Repeated exposure may cause skin dryness or cracking. Use in a well-ventilated area Vapours may cause drowsiness and dizziness.

Warcradle Scenics Super Glue is a high quality, Cyanoacrylate glue. It is perfect for assembling Metal, Resin or Plastic miniatures of all shapes and sizes.

Simply apply a small amount of glue to one side and press the parts together, the super glue will do the rest!

One 20g bottle of Warcradle Scenics Super Glue supplied.

Please note: Keep away from eyes. Repeated exposure may cause skin dryness or cracking. Use in a well-ventilated area Vapours may cause drowsiness, dizziness or respiratory irritation.

Bob Smith Industries Insta-Cure. CyanoAcrylate Super Glue, for ceramics, plastics, and hardwoods. 5-10 sec drying glue, 1 oz bottle. Reaches full strength in 2 hours.

Bob Smith Industries Insta-Cure. CyanoAcrylate Super Glue, for ceramics, plastics, and hardwoods. 5-10 sec drying glue, 1 oz bottle. Reaches full strength in 2 hours.