During recent engagements, UCM observers have reported the presence of a new Scourge heavy tank chassis with two distinct variants. Thankfully, these tanks forgo the familiar Slayer-type hull’s transport capacity, but this allows the mounting of larger weapons. Whether these are newly developed is unconfirmed, although AHQ has cited this as an example of the enemy’s capacity for innovation and rapid deployment of new assets while under the strain of invasion—a troubling prospect.

The Executioner mounts a slightly smaller version of the loathsome Bio-Mortar, a weapon previously only encountered aboard the massive Eradicator Chamelopod. This allows the Executioner to liquify the internal organs and flesh of emplaced enemy infantry from a distant, concealed position. Although it’s only been reported in combat for a short time, the Executioner is already a dreaded foe and has led to mass-desertions. Priority should be given to destroying Executioners before freedom of troop placement is entirely lost.

The Decapitator is especially unusual. Initially, observers thought this tank to be unarmed, if amazingly fast compared to other large skimmers. However, once the Decapitators closed to point-blank-range of their target, their central engine mount rolled 180 degrees to face forward. Although all speed was lost, that engine’s thrust could then be channelled into a laser-thin beam capable of slicing through virtually anything. Other heavy units, even the largest behemoths, are highly vulnerable to this new threat.

Contains 2 multi-part resin miniatures with parts to assemble as either the Executioner Heavy Tank or the Decapitator Heavy Tank.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

These Behemoths bear more than a passing resemblance to the smaller Oppressor, although they upgrade to walking on eight legs instead of six. Though still fast, this makes the Scourge Light Behemoth somewhat slower than the heavy-limbed Heavy.

The Punisher is unleashed by the Scourge when they care little for collateral damage. Its forelegs are a pair of hive-like structures that can carry a range of munitions, from explosive pods, to Razorworms. Its tail houses a Quake Bombard, a weapon capable of shaking buildings right down to their foundations.

The Persecutor is the anti-behemoth variant. It is armed with an underslung Plasma Destructor - one of the most powerful plasma weapons the Scourge have comitted to conflict. Backing up this mighty weapon are hull mounted Heavy Plasma Cannons, they themselves are capable of turning armour into molten puddles.

Contains 18 single-piece resin miniatures with 6 plastic bases to make 6 units of Razorworms and 1 multi-part resin miniature with parts to assemble as either a Punisher Terror-Mech or a Persecutor Terror-Mech.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

Please note that Behemoths are massive kits, and advanced modelling projects. Extra care, attention, and hobby skills will be required to assemble and paint them. Because of that, this kit it is only recommended for advanced modellers. Some parts will need heating and bending to fit perfectly straight and slight gaps might need filling.

While the Scourge are fully able to produce anti-gravity skimming vehicles on demand, UCM scientists believe that legged constructs are preferable for Scourge implantation despite their inherent drawbacks.

An Armour Battlegroup is a staple in games of Dropzone Commander, and is a required choice in every army. This set contains all compulsory choices in the Armour

Battlegroup, with Auxiliary units for support. This box is ideal for a new player - if you have a Starter Army, expand your force with this box.

Making the core of this Amoured Battlegroup is 2 Ravenor Laser walkers, these are equipped with Standoff Energy Clusters which can deal devastating damage to targets at close range. Alternatively they can be assembled as the Afflictor Hive Walkers, these project out pheromones' that attract swarms of insects that bog down any foolish enough to move through their swarm. The large support of the Battlegroup is the Subjugator Arthropod who slow down any nearby enemy units, it can also be built as an Oppressor Command Arthropod. The anti-air support comes in the form of 3 Ravager AA Beetles or can be made for anti-tank as the Stalker Beetle variant. Finally the battle group are transported in by a Harbinger Dropship.

Contains 7 resin miniatures and 1 clear acrylic flight stands.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

Scourge Behemoths are enormous, tentacled monstrosities, reckoned by many to be the most terrifying thing a soldier can face on the battlefield. Each of the Behemoth’s tentacles splay into smaller and smaller filaments which can extend to considerable length, reaching into buildings and plucking out unfortunate soldiers hiding within.

The Scourge Behemoth is a true spectacle of a kit. Behemoths are the largest Dropzone Commander models you can get, and are incredibly impressive models.

Able to be built as either a Tyrant or Dictator pattern, this kit contains 48 total parts, with plenty of options for the two variants. The tentacles are fully poseable for

maximum customisation.

The Scourge Behemoth comes complete with various weapons. With no small guns in sight, it relies on its Seeker Lashes to deal with infantry and light vehicles. The Tyrant is fitted out with some classic Scourge weaponry, albeit on a much larger scale. Four individual Heavy Plasma Cannons increase both the range and damage of their smaller cousins, while the strange Bio-Cannon bathes an entire area, melting anyone that stays there for too long.

The Dictator’s arms are instead loaded with the Static Accelerators - strange weapons that can tear through even the thickest armour, increasing their potency at closer ranges. Its Arc Maw is a terrifying perversion of arc technology, grounding its bursts in nearby targets, causing a chain reaction of energy to leap around the battlefield until stopped by the heaviest armour.

Contains 1 multi-part resin miniature with parts to assemble as either a Tyrant or Dictator Behemoth.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

Please note that Behemoths are massive kits, and advanced modelling projects. Extra care, attention, and hobby skills will be required to assemble and paint them. Because of that, this kit it is only recommended for advanced modellers. Some parts will need heating and bending to fit perfectly straight and slight gaps might need filling.

Spectres are the terror of helpless tank crews who can't hope to out-manoeuvre a tiny skimmer that's as fast as some aircraft. Armed with a formidable Plasma Lance, it is still fully capable of reducing a UCM main battle tank to molten slag while running rings around it. A rarer variant mounts the abnormal Photon Blaster that sends lethal beams silently through solid matter, straight through buildings to damage any target.

The Spectre Skimtank is a Standard choice in a Scourge army, great for players that like glass cannons! While lightly armoured, the Spectre is incredibly fast, and mounts powerful weapons. A Plasma Lance offers higher range than a standard Hunter, albeit at slightly reduced firepower. Alternatively the Photon Blaster allows Spectres to target enemies they can't even see, which goes a long way to protect this otherwise fragile unit.

Contains 4 multi-part resin miniatures with parts to arm all with either Plasma Lances or Photon Blasters.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

The Scourge's battle tactics often rely on shock movements. Indeed, that's how they won the battle against humanity at the very start! Using the fastest engines around, Scourge forces are able to run rings around their opponents - both in the air and hovering a few feet off the ground. With deadly close ranged firepower, their enemies barely have a chance to realise they're there before the Scourge have vaporised their foes.

An Armour Battlegroup is a staple in games of Dropzone Commander, and is a required choice in every army. This set contains all compulsory choices in the Armour

Battlegroup, with Auxiliary units for support. This box is ideal for a new player - if you have a Starter Army, expand your force with this box.

4 Spectre Skimtanks make up the bulk of this force, armed with long-ranged Plasma Lances or Photon Blasters, which can shoot through walls! They arrive in a Harbinger

Troopship. A Savager Laser Barge provides heavy, floating firepower, supported by 2 Corsair Interceptors, perfect for shooting down opposing aircraft.

The Harbinger may be assembled as either a Troopship or Dropship, with optional Mini Arc Caster. The Savager may instead be assembled as a Slaughterer Ordnance Barge. The Corsairs have enough parts to arm all with either Plasma Cannons or Arc Casters.

Contains 8 resin miniatures and 4 clear acrylic flight stands.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

A parasitic race, the Scourge arrived on Earth 150 years ago. They hit humanity’s home and the Cradle Worlds hard, destroying or enslaving billions of souls within mere hours of planetfall. One lone Scourge is an unformidable opponent, existing as a mass of tar-like black tendrils, barely able to lift its own weight. However, they insert themselves into living creatures and their grown vehicles alike, their limbs stretching out to cover every nerve, fully taking control of their host.

The Scourge army is made up of such creatures; part living, and part machine. Scourge weaponry is far advanced of UCM technology, burning attackers with plasma and electricity.

This box contains a perfect small Scourge army. With 6 anti-vehicle Hunters, 6 anti-air Reapers, and 12 bases of Scourge Warriors all in Invader APCs, you have a solid core for an army. All of these are brought to battle in 6 of the twisted Marauder Dropships, which provide astounding speed and deadly firepower.

The army is led by a Commander in a Despot. This bizarre walker leads small Scourge forces, and uses its Micro Subjugation Field to slow down opponents, making them easy prey. It’s taken to battle in an Intruder for fast entry and repositioning.

This set includes:

• Plastic Armour & Infantry: These multi-part hard plastic miniatures come on sprues for ease of construction. With easy-to-assemble pieces, you’ll have your army ready in no time at all. The Marauder Dropships are incredibly useful, able to transport many Scourge units.
• Resin Command: The Despot provides Scourge players with an inexpensive Command choice, cast in fine detailed resin. This miniature comes in five pieces, and fits under the Intruder. This unit can have a Commander inside, allowing it to dictate the flow of battle from the frontlines.
• Scourge Fastplay Cards & Template: Designed to get you playing straight away, these cards contain rules for all the units in this box.
• There is also a quick reference card for the full rules, making gameplay easier, and a Dropzone Commander Blast template for any Area effect weapons you might want to use.

Contains 34 multi-part plastic miniatures, 2 resin miniatures, 1 acrylic template, and fast play cards. Scenery and scenic bases not included.

Miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

The Corsair is a small, agile interceptor craft armed with a single, powerful plasma canon. Unusually for a fighter, this features a very low rate of fire. However, an impact from this anti tank weapon is almost always fatal for anything less than the heaviest aircraft. Alternatively, some Corsairs are armed with Arc Casters - the same as found on the deadly Reaper tank. They trade the Plasma Cannon's firepower for an arching storm of energy, able to find its target even with minimal targeting.

Corsair Interceptors are feared throughout the UCM, and with good reason! With an insane +5 Evasion, everything hits these little ships on 6s! Although incredibly fast and less easy to control than the hardier Reaver Gunship, the Corsair is no less deadly. A Plasma Cannon is a solid choice, especially for taking down ground vehicles. But you could trade that for an Arc Caster which - with its AA-3 rule - makes an incredible interceptor.

Contains 2 multi-part resin miniatures with parts to arm all with either Plasma Cannons or Arc Casters.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

Demolishers (nicknamed after their ability to demolish a building upon entry) are the only remnants of a brutal and savage alien race, long since conquered by the Scourge. In battle they use their strength to lug a pair of heavy weapons and to batter unfortunate enemies to a pulp!

Demolishers are some of the hardest Troops in the game. Although they only come in squads of 2 (six infantry total!), they don't need much more. Tough, Resilient, 4+ Passive Countermeasures, and Armour 9, they are extremely difficult to deal with. Armed with anti-armour Plasma Chargers they can dish out some game-changing damage. Their short ranged Shard Cannons are excellent at clearing out elite enemy squads from Garrisons too, making them extremely versatile core infantry.

Contains 12 single-piece resin miniatures with 4 plastic bases to make 4 units.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

The Despoiler is a towering monstrosity, a dreadful harbinger of doom. The arrival of a fleet of Despoilers is always the precursor to a Scourge ground incursion, and the terrible slaughter that inevitably follows.

For Scourge commanders wanting to transport a massive amount of tanks, the Despoiler is the obvious choice. With capacity for 9 Hunters and also 4 Vampires, this is the biggest transport available. With optional Twin Plasma Cannons for dealing with infantry, scenery, or tanks equally, the Despoiler is a must for larger armies!

Contains 1 multi-part resin miniature.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

Of all the Arthropods encountered by the UCM since the Scourge invasion, the Eradicator might be the most bizarre. Clad in reactive camouflage, these hulking walkers can bunker down and hide incredibly effectively. Many a battle has been lost when Eradicators previously entirely undetected have emerged, firing Bio-Mortars and Plasma Fusillades with little chance of retaliation.

If you like your Scourge big and mean and scuttling, the Eradicator is for you. Chameleonic Scales turn the already difficult to hurt Arthropod chassis into something even more hardy, gaining +2 Evasion if it doesn't move. The deadly Bio-Mortar tears apart infantry, and is one of the Scourge's only Indirect weapons. Alternatively you can arm the Eradicator with two Plasma Fusillades, which are incredibly powerful AA firepower. Bunker down and dominate the board!

Contains 1 multi-part resin miniature.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

While "ordinary" Scourge Demolishers are brutal and dreaded opponents in CQB, Eviscerators are truly terrifying. With the Scourge parasites losing their grip on the host, they lash out in a crazed rage, becoming almost unstoppable.

Straight up, the Eviscerator Assault Troops are some of the best in the game. With Armour 9, Resilient, and a 4+ Passive save, they're tough as boots. Add to that the literal Tough rule which re-rolls Collateral Damage and allows them to enter Garrisons from any direction, and you have a squad that isn't going anywhere anytime soon. And that's a big problem for your opponents, because their glaives can tear through light troops or heavy troops with absolute ease.

Contains 12 single-piece resin miniatures with 4 plastic bases to make 4 units.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

The Intruder is the smallest and fastest of all Scourge dropships and is designed to ferry a range of lighter cargo to the battlefield. It is armed with the same deadly plasma hose as the Marauder, making a large group of Intruders a particularly dangerous foe.

As far as transporting elite units goes, the Intruder is one of the best around. Extremely fast, and surprisingly well-armed, it's a must in most Scourge armies. This set allows you to make either the Intruder Light Troopship or the Intruder Light Dropship, using optional parts. The Troopship ferries infantry around (it's great for Eviscerators), while the Dropship carries smaller Drone walkers and even the Despot Suppression Walker.

Contains 2 multi-part resin miniatures with parts to make all as either Intruder Light Troopships or Intruder Light Dropships.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

The Minder is a tiny aerial craft, although it is still exceedingly hazardous to approach. Armed with a small version of the deadly Arc Caster, the Minder exists solely to cover invasion armadas from air attack. When the Scourge host of a Minder grows old, it starts to crave violence. Usually these Drones are refitted with Shard Cannons, and nicknamed Emeritus Drones. While the Shard Cannons can be potent against infantry in the open, their true strength lies in their final act - destroying themselves in a fiery blast, taking everyone nearby with them.

Both Minders and Emertius Drones are Scout choices for the Scourge, helping extend Command range and also providing firing lines for their (albeit quite rare) Indirect weapons. Minders are best suited for intercepting enemy aircraft, using their short-ranged Micro Arc Casters to bring down Dropships. Meanwhile the Emeritus Incendiary Drones are all about getting close very quickly to use their devastating Self-Destruct to remove most things in a large radius!

Contains 8 multi-part resin miniatures with parts to build all as either Minder AA Drones or Emeritus Incendiary Drones.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

Oppressors are most often seen with large numbers of Prowlers, Stalkers and Ravagers, but unlike many command units are frequently on the sharp edge of any attack where they can do the most damage. Aided by Subjugators, these strange walkers will slow all enemies to a crawl, allowing the Scourge to overwhelm their positions.

Ever wanted to command your armies with a giant enemy crab? Oh, and this thing doesn't have a weakpoint that opponents can strike for massive damage! All it has is super thick armour, loads of Damage Points, an Electroweb Caster (for killing heavy tanks), Plasma Carbines (for killing everything else), and Razorclaws for getting close and personal. Did I say "all" it has? That's a lot! Also you can put your Commander in there! And if that wasn't enough, you can also make an alternate, the Subjugator. While lightly armed, the Subjugation Field reduces the number of actions close-by enemies can take, and even stops them using Scan Tokens. Take that, Shaltari - who's doing the shenanigans now?!

Contains 1 multi-part resin miniature with parts to make either an Oppressor Command or Subjugator Arthropod.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

The Spider Drone is a tiny four legged walker, the like of which is not seen in the employ of any other race. Operating far from Scourge lines, Spider Drones are a terrifying sight for any enemy, injecting plasma into vehicles, or spewing acid all over infantry.

These skittering little nightmares are a must for most Scourge players. Small enough to enter Garrisons, but tough enough to survive most light arms, these little blighters will be a nightmare to deal with. Prowlers are armed with Plasma Injecting Proboscises (probosci?) that can destroy even the toughest tanks (especially when swarmed with 8 of them). Alternatively you can build your spiders as the Raptor variant. Armed with an Acid Spout they can hit enemy infantry when outside of a Garrison, or get in close and melt even the toughest armour.

Contains 8 multi-part resin miniatures with parts to make all as either Prowler or Raptor Spider Drones.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

The Razorworm is a merciless predator, a terror of dark places and a living nightmare in chitin, flesh and claws. As a particularly virulent life form, the Scourge maintain breeding stock of these voracious aliens for use as hosts.

Razorworms. Even the name brings terror! They're giant, spiky worms that can get anywhere and can eat a human whole. What's not to love? Although they're not going to be claiming Objectives any time soon, these massive beasts can munch through the most heavily armoured enemy infantry, or - if you run out of targets - even take on light vehicles!

Contains 12 single-piece resin miniatures with 4 plastic bases to make 4 units.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

The Reaver Gunship is a roving predator of the skies with the sole purpose of annihilating enemy ground units. Corruptor Hiveships are first on the target list for any UCM Infantry force Commander since they carry a violent cargo of Razorworm pods that spells certain destruction to any garrisoned units.

With a decent statline, the Reaver and Corruptor are solid choices in any Scourge list. Fast and deadly at close range, they will get the job done. The Reaver's job is blasting apart tanks with a decent range for Scourge! Corruptor Hiveships are a bit weirder. Their primary mode of attack is launching units of Razorworms into Garrisons. From there the Razorworms can cause havoc, not even needing to re-roll their Damage that round!

Contains 2 multi-part resin miniatures with parts to make all as either Reaver Gunships or Corruptor Hiveships.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

The Annihilator and Obliterator are towering artillery walkers of titanic proportions. An unusual vehicle in that it can transition to flight mode, thus dispensing with the need for a dropship, the Annihilator and Obliterator are rightly feared by ground forces, as they have a longer range than almost anything else in the Scourge armoury.

Well now, that thing is massive, eh? The Annihilator has long been a mainstay in a Scourge army, and that's because it's big and is one of the only Scourge weapons with Indirect! Not that it's particularly weak, so doesn't need to hide much anyway. You can even upgrade the Annihilator with an Ancient Bond (represented by the head-plate in the kit), giving it Commander Centre. The Obliterator is an alternative build of this giant, trading indirect weapons for an unlimited range laser that has Destroyer and Devastator-3 for both Vehicles and Behemoths!

Contains 1 multi-part resin miniature with parts to make either an Annihilator or Obliterator.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

The Harbinger Dropship has heavier armour than the common Marauder, designed for frontal assaults against hardened targets where a brutal charge across open ground awaits and conventional Scourge dropships would crumble to withering fire.

This kit builds either the Harbinger Troopship or the Harbinger Dropship. The Troopship is perfect for taking Screamers into battle, whilst the Dropship is ideal for taking both Arthropod and Beetles. In addition to this both can transport Vampires and both have access to the devasting but short range Plasma Bomb.

Contains 1 multi-part resin miniature with parts to make either a Harbinger Troopship or a Harbinger Dropship.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.