Officer Radians was honourably discharged from the navy after suffering an injury in the line of duty. Despite a series of back injuries, he walked the road to recovery and then some. Wanting to inspire others that are going the same he signed up to fight in the RUMBLESLAM ring.

Radians is an athlete like no other, Grappling comes to this wrestler as second nature. His Olympic Slam is a Crowd Pleasing favourite that deals a base 3 Damage, following this up with the Naval Suplex will Knockdown Radians' feeble competitors.

Flag Held High is a Crowd Pleaser that is hard to miss, bringing all freindly wrestlers to their feet and arousing them to consciousness. Being of Radians' caliber comes with some Exacting Standards meaning he will re-roll dice to execute his moves.

Contains 1 resin multi-part miniature with square acrylic base.

Resin miniature supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Note that clear acrylic bases have a peelable protective film. Miniatures supplied with square bases.

"The ancient chapel sits alone and empty, the parishioners long since gone."

The Sacrosanct Ruins combine together to create one large chapel building or can be used apart giving in four ruined corner sections. Each individual section has a floor design that allows it to be slotted into other buildings with the same floor design. The exterior of the buildings have the same slots to allow connectivity with other savage domain kits.

The Ruins are made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"The downside of constructing houses on uneven land is that each estate needs to be built up on stable foundations."

The Tumbledown City Risers provide elevation to your gaming board. The blocks are large enough to give ample space for buildings, as well as the same slots to allow connectivity with other savage domain kits.

The Risers are made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"These once luxurious mansions were home to the great and the good of the city, now they lie in ruins."

The Tumbledown Manor is a modular set of ruined houses that can be combined into one large housing block or used apart to make a more spacious ruined suburb. Each individual building has a floor design that allows it to be slotted into other buildings with the same floor design. The exterior of the buildings have the same slots to allow connectivity with other savage domain kits.

The Manor is made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"The ruined fortress lays before us. Be wary as it may now be home to bandits."

The Frozen Keep is a medium sized kit with space to connect it to the existing castle walls as well as all the other savage domain kits. The height of the keep allows for verticality over other nearby terrain pieces and the walls provide line of sight blocking.

The Keep is made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Platform now silent, the ruined bandstand sounds of music no more."

The Pavilion Bandstand is a small kit designed to be set dressing and add a bit of visual interest on your larger savage domain layouts.

The Bandstand is made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Ah! That Dragon wind blow your tiles away again I see!"

For when dragons fly by and take your roof with them or some rapscallion has knocked tiles off when climbing all over your roof, we have got you covered! Roof Tiles! Lots and lots of them, 2 sheets in fact.  These roof tiles are used throughout our Savage Domain Range.

Made from 1mm Greyboard. It is a great bit of scenery detailing to use with your MDF Kits.

We advise using PVA glue for the best results. Models shown are for example only and are not included.

"Looks can be deceiving. Though it appears empty, a sorcerer's glamour spell lies over this place, masking its true form."

This Multipart kit can create a modular structure or be used as many individual buildings. Each individual building has a floor design that allows it to be slotted into other buildings with the same floor design. The exterior of the buildings have the same slots to allow connectivity with other savage domain kits.

The Sorcerer's Redoubt is made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Sad state of affairs when the state just expects you to process yourself..."

Cuts have been made everywhere, now the law is in your own hands with this Process Unit. That's right, if you have committed a crime you are actually expected to turn yourself in for processing.

The Process unit is made from 3mm MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

Lenore always wanted to be a wrestler, though her father strictly forbade her. It was a fateful encounter with a sinking casino ship that let her escape her life under the sea.

Lenore comes splashing into the ring with the elegance of the waves themselves. A solid stat line with expertise in grappling. Her signature grapple the Singing Snap DDT, will daze the toughest of wrestlers.

Leaping from the top rope, Lenore will barge through any wrestler, 2 Gold +1 means it's gonna be scoring those all important beatdowns and Shove 4 will fling wrestlers across the ring. 

Lenore's power of the sea is unequal. The Atlantean Tailsweep has her whipping her fin and any caught in the sweep must stand their ground or be knocked to the canvas. The Crowds favourite is the Wavemaker, producing a a huge wave in the middle of the ring and repositioning all wrestlers gets the crowd going wild.

Contains 1 resin multi-part miniature with square acrylic base.

Resin miniature supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Note that clear acrylic bases have a peelable protective film. Miniatures supplied with square bases.

"When it says hurry, it really means it. No one pays attention to these signs"

What good is traffic control if no one knows where they're going or when it is safe to cross? Add this accessories kit to your SLAB Streets Junctions to bring life to your game board.

The SLAB Streets Accessories kit is made from 3mm MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"There's no such thing as one size fits all"

Built a sprawling city of SLAB Habs but you need to control traffic flow? Well, these are the barriers for you! Ready to cause general annoyance to everyday travellers and passable cover for desperate situations! 

Contains:

3x Large Barriers
3x Medium Barriers
4x Small Barriers

The SLAB Streets Barriers kit is made from 3mm MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"You can't go straight on, but at least you can turn left now."

Junctions, for when your traffic control needs to be a little more succinct than just "do not pass". 

The SLAB Streets Barriers kit is made from 3mm MDF. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"Seriously where does our tax money go?"

Yes, you really are expected to clean up after yourselves once you've finished "cleanin up the streets". Cartridges in the bins, please. 

The Wastestation is made from 3 MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

After capturing various Rashaar creatures from the depths of the Venetian canals, they are gifted with the Blood Kiss. The Bloated Rotters and the Leeches are cultivated in the Growing Grounds, checked on and pulled to the surface by the ferryman when they're properly matured. In battle, Vlad uses these beasts as nothing more than fodder, knowing that these monstrosities are bred purely for chaotic slaughter, nothing more. 

A Ferryman leads fourth the undead creatures from the depths of the canals of Venice. One of these monstrosities is the Leech, the gapping maw bares a thousand teeth that will drain the life out of any who can caught in it's bite.

Following closely is the Rotters, these festering Rashaar will power through the water and lunge at the enemy in a berserk frenzy, however there bodies cannot withstand the rot that is eating away from their inside.

Contains 5 resin miniatures and 5 plastic bases. Cobblestone bases pictured not included.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

"Once the job is done, put them in the boat, let them float out to sea where they will never be found again"

An ideal transport for a strigoi, always carrying a light snack.

They also make perfect arenas to duel other Carnevale characters in 1 v 1 combat.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

The Shaltari are an ancient and highly developed species. Their technology is advanced to a level of sophistication rivalled only by its potency. They have traversed the stars for millennia, learned myriad truths, and have fought countless wars. Through their knowledge, the Shaltari transcend even death itself, and can endure indefinitely, perceiving the ebb and flow of time like no other race.

In battle, the Shaltari are fearsome adversaries. Their swiftness is unmatched, their firepower spectacular, their bravery undeniable. The beauty of their vessels bellies their true nature; engines of death, honed to lethal perfection long before humanity learned to throw stones. They are peerless masters of technology.

The Shaltari fleet is a finely balanced blade poised to cut to the heart of any foe. Their gunnery skills and scanners are unrivalled, delivering death from ranges other races can only dream of. The fantastically advanced energy shields can be raised at will, protecting their fragile but stealthy ships from harm at the expense of visibility. Skilful captaincy and timely execution are rewarded with sublime victory.

This boxed set is the perfect way to get started with a Shaltari fleet or add to an existing one, since it can be configured to almost any requirement!

CONTENTS

3x Shaltari Cruisers: These multi-part hard plastic lavishly detailed 1:9150 (0.2mm) scale miniatures can be assembled as up to ten different classes, including cruisers, heavy cruisers, fleet carriers, light cruisers and motherships! Typical length 109mm. 25 Parts per ship (including optional ones).

4x Shaltari Frigates: These multi-part hard plastic lavishly detailed 1:9150 (0.2mm) scale miniatures can be assembled as up to four different classes. Typical length 68mm. 20 Parts for all four ships (including optional ones).

3x Shaltari Voidgates: One of these lavishly detailed 1:9150 (0.2mm) scale single part hard plastic miniatures is included with each Shaltari cruiser. Radius 38mm.

NOTE: All ships are provided with a multi-part Dropfleet flight stand, designed to track in-game status without the use of tokens. Miniatures supplied unassembled and unpainted.

Shaltari Fastplay Sheet: Includes stats and battlegroup setup for the fleet build shown on the cover, making it easy to get gaming quickly! Also includes quick reference tables.

Miniatures made in Great Britain, printed in Great Britain. Models supplied unpainted and unassembled.

"Who are we fighting Admiral, there are enemies on all sides, what should we do?"....."I don't know, crewman... Check our tokens."

This set contains a bunch of useful tokens for playing games of Dropfleet Commander.
Low Orbit and Atmosphere tokens in black and white can be used to keep track of which orbital layer your ships are occupying.

A set of markers for Silent Running, Minor Spikes, and Major Spikes in blue, yellow, and red can be slotted around the stem of a ship to clearly show what sort of signature changes a ship is affected by.

Finally this set contains a handful of black dice for tracking damage, launch asset sizes, or VP's.

This set contains 27 signature markers in 3 different colours, 18 Low Orbit markers, 9 Atmosphere markers, and 12 black dice.

Acrylic supplied unassembled. This kit will require cleaning and assembly, and there may be some small variations from those shown.

The first Cart Crab was there at the beginning of RUMBLESLAM! Crawtacular the 1st was a simple hot dog seller until a brawl outside the ring damaged his hot dog cart.

Fiercely territorial, the Clownfish and Emo Nemo are fragile but fighty and will protect the ring from any intruder.

A Merfolk Siren moves enemy wrestlers around the ring as if they were under a spell, while the Wavemaker brings the power of the ocean into the ring, knocking down and dazing enemy wrestlers.

Lastly the Cart Crab trundles into the ring. Slow but sturdy, the Cart Crab can retreat into its hot dog stand when things turn rough, or share out celebratory mid match snacks when the crowd goes wild.

Contains 5 resin miniatures with 5 clear acrylic bases, and 5 character cards. Acrylic bases will have coloured film on that needs removing before assembly.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

The scale of these diggings require similarly gargantuan machines. For the Resistance, these became prime targets for all sorts of modifications - the vast majority not for battlefield roles, but some have proved surprisingly effective. By far the most commonly used is the Avernus platform, a quadruped design with heavy armour, designed to cope with tunnel collapses and uneven, virgin cave formations.

These mighty Mining Engines are based off of the same heavy armoured hull that can withstand the strongest of firepower. Both variants come bearing two autocannons that ignore all cover making them excellent for clearing out those hidden units.

The Avernus has a large Mining Laser mounted on the back of the hull, this weapon fires a beam and punches through everything caught in its path, be that building, armour or infantry. The Cerberus swaps the direct firepower of the Mining laser for the more versatile Vent Repeater. The shots from this weapon can deal devastating damage and in desperate times the crew can overcharge the Repeater to increase the energy of the weapon, however this can come with terrible consequences.

Contains 1 multi-part resin miniature with parts to assemble as either an Avernus Mining Engine or a Cerberus Mining Engine.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

Please note that Behemoths are massive kits, and advanced modelling projects. Extra care, attention, and hobby skills will be required to assemble and paint them. Because of that, this kit it is only recommended for advanced modellers. Some parts will need heating and bending to fit perfectly straight and slight gaps might need filling.