"Once the job is done, put them in the boat, let them float out to sea where they will never be found again"

An ideal transport for a strigoi, always carrying a light snack.

They also make perfect arenas to duel other Carnevale characters in 1 v 1 combat.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

The Shaltari are an ancient and highly developed species. Their technology is advanced to a level of sophistication rivalled only by its potency. They have traversed the stars for millennia, learned myriad truths, and have fought countless wars. Through their knowledge, the Shaltari transcend even death itself, and can endure indefinitely, perceiving the ebb and flow of time like no other race.

In battle, the Shaltari are fearsome adversaries. Their swiftness is unmatched, their firepower spectacular, their bravery undeniable. The beauty of their vessels bellies their true nature; engines of death, honed to lethal perfection long before humanity learned to throw stones. They are peerless masters of technology.

The Shaltari fleet is a finely balanced blade poised to cut to the heart of any foe. Their gunnery skills and scanners are unrivalled, delivering death from ranges other races can only dream of. The fantastically advanced energy shields can be raised at will, protecting their fragile but stealthy ships from harm at the expense of visibility. Skilful captaincy and timely execution are rewarded with sublime victory.

This boxed set is the perfect way to get started with a Shaltari fleet or add to an existing one, since it can be configured to almost any requirement!

CONTENTS

3x Shaltari Cruisers: These multi-part hard plastic lavishly detailed 1:9150 (0.2mm) scale miniatures can be assembled as up to ten different classes, including cruisers, heavy cruisers, fleet carriers, light cruisers and motherships! Typical length 109mm. 25 Parts per ship (including optional ones).

4x Shaltari Frigates: These multi-part hard plastic lavishly detailed 1:9150 (0.2mm) scale miniatures can be assembled as up to four different classes. Typical length 68mm. 20 Parts for all four ships (including optional ones).

3x Shaltari Voidgates: One of these lavishly detailed 1:9150 (0.2mm) scale single part hard plastic miniatures is included with each Shaltari cruiser. Radius 38mm.

NOTE: All ships are provided with a multi-part Dropfleet flight stand, designed to track in-game status without the use of tokens. Miniatures supplied unassembled and unpainted.

Shaltari Fastplay Sheet: Includes stats and battlegroup setup for the fleet build shown on the cover, making it easy to get gaming quickly! Also includes quick reference tables.

Miniatures made in Great Britain, printed in Great Britain. Models supplied unpainted and unassembled.

"Who are we fighting Admiral, there are enemies on all sides, what should we do?"....."I don't know, crewman... Check our tokens."

This set contains a bunch of useful tokens for playing games of Dropfleet Commander.
Low Orbit and Atmosphere tokens in black and white can be used to keep track of which orbital layer your ships are occupying.

A set of markers for Silent Running, Minor Spikes, and Major Spikes in blue, yellow, and red can be slotted around the stem of a ship to clearly show what sort of signature changes a ship is affected by.

Finally this set contains a handful of black dice for tracking damage, launch asset sizes, or VP's.

This set contains 27 signature markers in 3 different colours, 18 Low Orbit markers, 9 Atmosphere markers, and 12 black dice.

Acrylic supplied unassembled. This kit will require cleaning and assembly, and there may be some small variations from those shown.

A full ring of mini cleaning brushes to get your TG or XG airbrush back to perfect! These nylon bristled brushes have a core of stainless steel and are perfect for cleaning nozzles and brush body for nearly any airbrush.

Brush sizes range from 2mm - 6mm

To clean the body of the airbrush -

Simply remove the needle and nozzle from your airbrush, dip the proper sized cleaning brush in water or cleaning solution, and insert into the body from the front, gently moving back and forth to remove any dried paint or debris. Flush your airbrush with water or cleaning solution immediately after to remove anything loosened during cleaning.

To clean the nozzle -

DO NOT insert from the front side of the nozzle.

DO NOT attempt to push the brush through the entire nozzle.

Only insert the small cleaning brush from the rear (larger opening) of your nozzle and only until you feel the brush getting tighter as the nozzle tapers. Rotate the nozzle around the brush while inserted this way and then pull out the brush slowly to remove any loosened paint or debris. Flush with water after.

Repeat as necessary!

The ultimate PRO Sable set! Combines all 5 round sizes - 0, 1, 2, 3, and 4

Our PRO Sables are made from the finest Sable and designed with a shape that will load a sizable amount of paint, while delivering perfect control with every stroke. Great “snap” and very fine points to put the finishing details on your models. Great for use with acrylics as well as other thin mediums, PRO Sables will allow you to blend easily and create the finest details at any scale.

The first Cart Crab was there at the beginning of RUMBLESLAM! Crawtacular the 1st was a simple hot dog seller until a brawl outside the ring damaged his hot dog cart.

Fiercely territorial, the Clownfish and Emo Nemo are fragile but fighty and will protect the ring from any intruder.

A Merfolk Siren moves enemy wrestlers around the ring as if they were under a spell, while the Wavemaker brings the power of the ocean into the ring, knocking down and dazing enemy wrestlers.

Lastly the Cart Crab trundles into the ring. Slow but sturdy, the Cart Crab can retreat into its hot dog stand when things turn rough, or share out celebratory mid match snacks when the crowd goes wild.

Contains 5 resin miniatures with 5 clear acrylic bases, and 5 character cards. Acrylic bases will have coloured film on that needs removing before assembly.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

Models supplied unpainted and unassembled.

Contains:

• 40 hard plastic Goblin infantry (build Spitters, Rabble or Sharpsticks)
• 8 hard plastic Mawpups
• 1 PVC plastic Goblin Mincer
• 1 metal Goblin Biggit
• 6 PVC plastic Trolls

Models supplied unpainted and unassembled.

Contains:

• 1 Resin Banggit
• 1 Vanguard Card

Models supplied unpainted and unassembled. Requires Superglue.

Contains:

• 1 multi-part metal Goblin War Engine
• 3 Crew
• Big Rock Thrower Components
• Bases

Models supplied unpainted and unassembled. Requires Superglue.

Contains:

• 1 x resin goblin flaggit
• Base

Models supplied unpainted and unassembled. Requires Superglue.

Contains:

• 1 x resin flaggit
• 1 x resin mawbeast
• Cavalry base

Models supplied unpainted and unassembled. Requires Superglue.

Contains:

• 10 plastic resin Goblin Fleabag Riders
• Choice of rider heads
• 10 25mmx50mm Bases

Models supplied unpainted and unassembled. Requires Superglue.

Contains:

• 10 Goblin Fleabag Rider
• Metal Archer Bodies
• Metal Command Components
• Plastic Bases

Models supplied unpainted and unassembled.

Contains:

• 1 PVC Plastic Giant
• 2 Heads
• 2 sets of arms
• Optional fur
• 75mm Square Base

Models supplied unpainted and unassembled. Requires Superglue.

Contains:

• 1x Resin Grupp Longnail
• 1x 20x20mm base

Models supplied unpainted and unassembled. Requires Superglue.

Contains:

• 1 x resin goblin king
• Base

Models supplied unpainted and unassembled. Requires Superglue.

Contains:

• 1 x resin goblin king
• 1 x resin mawbeast
• Cavalry base

Models supplied unpainted and unassembled. Requires Superglue.

Contains:

• 1 Resin Kuzlo, riding his giant lizard, Madfall
• 1 50mm Square Base
• 1 Kuzlo & Madfall Stat Card