"All I know is that, to me, you look like you're havin' fun.

Open up your lovin' arms. Watch out, here I come."

Yup, this will spin you all the way round. Traditionally a tame and relaxed ride at the fair ground. Not while its on the tabletop in an active combat zone. There are no rules on how fast this can spin so feel free to go ham when your opponent is on the Carousel floor. Nothing quite like turning a fair ground ride into a human sized blender.

This kit is made from 3mm MDF and goes together simply. The base plate has a rim which can be attached in 2 different ways allowing the kit to be either completed as one piece or two. Perfect for 28-32mm tabletop games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"We have reports coming in from all over the battlefront sir, our troops are advancing and taking ground!"

The Command Centre is a modular, multi-part set. Able to be set up in many layouts, this kit can be deployed differently every time you set up to play. The main building has playable space on the top for your more manoeuvrable minis and is removable to allow for interior play.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Seen clearly, life without hope is hell, but Hell without fear

is a fairground attraction".

No fairground would be complete without some rigged games, I mean super hard skilled games and some seriously nutritious food stalls. After all what's a fairground without the world's 'strongest' person, whack-a-mole or hot dogs? A shambles, that's what. Great line of site blockers and all round just fun to have. After all, bringing an oversized hammer to tabletop gun fight is never a good idea.

This kit is made from 3mm MDF and easily assembled. For the fair goers and is perfect for 28-32mm table top games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Flight pad designation 01A is cleared and available to receive incoming ships."

The Flight pad is a large area terrain piece that provides slight elevation to your board. Tall enough to provide heavy cover to most miniatures, it can also be used in conjunction with the Strike Fighter or any other small ship you may have.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"I saw a shimmering light. My head grew heavy and my sight grew dim.

I had to stop for the night"

Much like the Hotel California, The Haunted Funhouse is easy to enter but quite a different story when you want to leave. Three individual levels of chaos, neatly packaged in one terrifying package. With doors and hatches never leading to the same place, you can never really be sure of where you will end up. The best or worst part is the doors and the walls in the maze have a mind of their own and tend to move around.

This kit is made from 3mm MDF and a small challenge to put together. Care must be taken as we have utilized a bendable MDF construction to create the tongue. The ground floor consists of a movable maze and comes with additional wall stabilizers if instead of a maze you want some barriers or line of site blockers. Perfect for 28-32mm tabletop games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"This is Strike Fighter designation 01A... Do I have clearance to land?"

The Strike Fighter is a small vehicle, built to be used in conjunction with the Flight pad. Self supporting with its landing gear and consoles, the Strike Fighter makes great scatter terrain for a hangar board or on the edge of your town board.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Life is like a Ferris wheel. Even when you're down, just remember there's always a way back up". You almost always get off at the bottom... Hopefully..."

The Pier, Vegas, your local fairground with less than sound construction, wherever it may be there is a ferris wheel near you. This iconic fairground/amusement park/tourist attraction is fraught with terror despite its slow-moving nature. There is always the fear of being stuck at the top for longer than you may want to be there and the loss of control or a giant ape climbing up to capture your carriage.

This kit is made from 3mm MDF and a small challenge to put together. Care must be taken as we have utilized a bendable MDF construction to create the carriages. Yes, it rotates, has a ticket booth for the fair goers and is perfect for 28-32mm tabletop games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Close the blast doors!! Soldiers, form up. This is our last line of defence.

The Bunker kit makes for a great objective building on your sci-fi table top. It comes with a fully playable roof section that is removable to allow access to the interior.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Sandstorm Hovel B is a perfect small kit to fill out the housing buildings on your sci-fi town boards. Although it has a smaller footprint than the other sandstorm kits, hovel B is taller to provide more verticality for your models.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The barracks has the capacity to house a hundred men, including weapons and equipment, fighting fit and ready to respond to any local danger.

The Barracks is a large set great for a centrepiece to build a sci-fi base around. The kit includes a removable roof and sliding doors to allow interior playability, as well as ledges and a shallow sloped roof if your units want to capitalise on the high ground!

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Get a sniper team up on those gantries, I want eyes on the enemy! A squad and B squad will circle around and catch them by surprise. Units! Move out!

The Gantries provide a raised firing platform with fortified barriers, giving heavy cover to your advanced units. Containing multiple modular pieces, it can be set up in many ways each time you play, a perfect addition to any sci-fi base layout.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

This is Gold leader... requesting permission to land... Gold two has been clipped... engine failing... clear the deck we are coming in hot...

The Landing Platform is great kit if you need to provide a bit of height to your sci-fi gaming board. A perfect obstacle for any vehicles, setting up the chance of a spectacular crash in game. The base of each tower incorporates a door design if you want to house-rule the ability to use the inbuilt elevator to gain access to the high platform.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Most conflicts are fought and won over battlefield objectives. This battle is no different.

The Objectives set provides you with almost every item needed for an objective based game in your battles in a galaxy far, far away. The kit contains:

• 1 Crashed Pod
• 6 Landmines
• 2 Mine Carts
• 4 Water Gatherers
• 3 Consoles
• 5 Crates
• 6 Supply kits

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Some still say you can hear the fires burn and the hammer swing"

The Farrier's Homestead, a once lively and busy place, known as the one stop shop for those shiny shoes for your favourite horse. Now only shadow of its former self, it is perfect for skirmishes! Keep it close or spread out across your Savage Domain board to create lots of cover and ambush zones. One thing is for sure, it's certainly going to be lively again at the Farrier's homestead.

The Farrier's Homestead is made from 3mm MDF and 1mm greyboard. It is a great scenery kit to use in Fantasy skirmish games, and will work perfectly with 28-35mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and not included.

The residents of Pitchstone have everything they could possibly need; A store to buy traps and a Doctor's office to help you when it goes wrong.

The Pitchstone Quinn Street contains 1 doctor's office, 1 store, 3 large boardwalks, 1 medium boardwalk, 2 small boardwalks, 1 sign, 1 set of crates. The Pitchstone Quinn Street is suitable for competitive and narrative play by providing both line of sight blocking as well as high vantage points, it also has removeable floors allowing for interior play. Whilst providing these competitive features the Pitchstone Quinn Street is ideal for new and experienced hobbyists alike. 

The Pitchstone Quinn Street is made from 3mm MDF. It is a great scenery kit to use in sci-fi skirmish games and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Launch assets (fighters, bombers and torpedoes) are important elements in games of Dropfleet Commander - both for protecting your ships and annihilating your opponents!

These greatly add to the look and feel of your fleet, enhancing the gaming experience by replacing the card tokens provided in the starter set. Each of these craft is moulded with an integrated flight stand to attach to its base, allowing for easy assembly.

CONTENTS

This box contains 2 black hard plastic launch asset sprues. In total, these build 8 bases of bombers (3 bombers/base), 6 bases of fighters (5 fighters/base) and 2 bases of torpedoes (1 torpedo/base). This is usually enough for one player with an average tournament sized fleet.

Since these miniatures are so small, they are designed to be generic and not race specific. Simply paint them in your fleet colours to differentiate them!

Base size is 20mm x 20mm.

A tiny portion of humanity turned its back on mankind in the waning days of the last Golden Age. Over one and a half centuries later, the PHR has emerged from the shadows as an unrecognisable civilisation, its people irrevocably changed. They are no longer simple human beings, they are post-humans - cyborgs.

A society no more than three billion strong, the PHR is a nation of elites, each individual more than a match for several lesser mortals. With remarkable speed, they have made technological advancements surpassing those of the UCM. Since its fiery birth, the PHR has been guided by the enigmatic White Sphere, a mysterious object of immense power. It is treated by the people of the PHR with a reverence bordering on worship.

The supremely tough PHR fleet delivers superlative firepower through massed weapon broadsides, producing a maximum damage output unmatched by other races. However, their limited fire arcs require a skillful hand at the helm to unleash a punishing double salvo.

This boxed set is the perfect way to get started with a PHR fleet or add to an existing one, since it can be configured to almost any requirement!

CONTENTS

3x PHR Cruisers: These multi-part hard plastic lavishly detailed 1:9150 (0.2mm) scale miniatures can be assembled as up to ten different classes, including cruisers, heavy cruisers, fleet carriers, light cruisers and assault troopships! Typical length 111mm. 49 Parts per ship (including optional ones).

4x PHR Frigates: These multi-part hard plastic lavishly detailed 1:9150 (0.2mm) scale miniatures can be assembled as up to five different classes, including frigates and strike carriers. Typical length 73mm. 36 Parts for all four ships (including optional ones).

NOTE: All ships are provided with a multi-part Dropfleet flight stand, designed to track in-game status without the use of tokens. Miniatures supplied unassembled and unpainted.

PHR Fastplay Sheet: Includes stats and battlegroup setup for the fleet build shown on the cover, making it easy to get gaming quickly! Also includes quick reference tables.

Miniatures made in Great Britain, printed in Great Britain. Models supplied unpainted and unassembled.

The Sidewalk Accessories are made from resin. They are designed for 28-32mm gaming and are a great addition to a city board.

Includes:

• 2 Newspaper Dispensers
• 4 Parking Meters
• 20 Traffic Cones
• 1 Portable Toilet

The Scrapyard Accessories are made from resin. They are a great addition to your table top. Designed for 28-32mm wargames. These are not toys. This set contains small parts. Not for use by anyone under the age of 14. The pack contains 7 individual pieces, including:

• 1x Damaged turbine
• 1x Damaged wheel bot
• 3 x Small junk piles
• 2x Damaged engines

TTCombat Paint racks are a great way to store and organise your paints. Each one is designed to hold a specific type of paint.

The Citadel Paint Rack 25 features enough slots to hold 25 Citadel paints, ranging from 14-18ml sized bottles.

Designed to be as easy to assemble as possible, you'll be able to organise your painting area in no time at all.

Made from 3mm MDF and supplied flat. Assembly is required and we recommend using PVA glue for the best results. Paints not included.