The Modular Dungeon Tiles are made from 3mm MDF, easy to put together and look great on the tabletop. Great scenery to use with fantasy gaming . Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Each square is 25mm scale.

Dungeon Tiles Set B includes - (58 modular dungeon tiles) Tiles can be placed in any combination:

• 22 x 1x1 single tile
• 4 x Sewer Entrance / Exit
• 4 x 3 square corner tile
• 4 x 3x1 straight tile
• 4 x 4x1 straight tile
• 4 x 3x3 square tile
• 2 x 8x2 tile
• 2 x 10 square 'Z' shaped tile
• 2 x 16 square 'Z' shaped tile
• 2 x cross shaped tile
• 2 x 8 square corner tile
• 2 x star shaped tile
• 2 x 3x6 tile
• 1 x 5x6 square tile
• 1 x 5x6 square tile with cryptic writing puzzle
  

The Modular Dungeon Tiles are made from 3mm MDF, easy to put together and look great on the tabletop. Great scenery to use with fantasy gaming . Model supplied unpainted and will require assembly.

Each square is 25mm scale. Tiles can be placed in any combination. And flat pack for easy transport.

Dungeon Tiles Set C includes - (49 Modular Dungeon Tiles)

• 14 x 1x2 sections
• 8 x long single corridors
• 4 x long corner sections
• 4 x medium room
• 3 x 2x3 sections
• 2 x half moon sections
• 2 x small rooms
• 2 x diagonal sections
• 2 x u sections
• 2 x z section
• 2 x reverse z section
• 2 x small crossroad
• 1 x 3x6 room
• 1 x 4x6 room

Is there anything more iconic than a pretty Elven bridge? Maybe autumn leaves falling off trees, but it would have to be a lot of them.

The Elven Bridge has everything you need to cross water. It has steps, it has railings, and it has elaborately designed arches for plants to grow on. If you don't think that last one is a necessity, then you need to tart up your life a bit more! The Elven Bridge is a perfect place to start. ;)

The kit is made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

There's no better way to protect your city than behind a big wall. Well, maybe a bunch of magical water horses, but we can't make those in MDF. Or could we...?

This massive piece comes with a large central keep with elaborate platform (what else would you expect from Elves?), a large gate, two large walls, two small walls, and four platforms! With all of these bits, it's easy to make a fully fortified Elven board.

The kit is entirely modular, using a simple hook mechanism on the walls and gate to attach to the platforms and keep in many different combinations. The platforms are eight-sided, so there's loads of variations you can make!

The kit is made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Imagine the swelling score as you walk through the Gateway. Light dappling down through the trees, and a faint autumnal glow over everything, even though it's summer. Ahhhh, so peaceful!

With a large gateway, two towers *cough*, two platforms, four archways, two staircases and a few small accessories, the Elven City Gateway makes an excellent start to any Elf board.

The set is completely modular, able to be set up in any order. Whether you want to make an open wall across your board or maybe an enclosed courtyard, these finely detailed scenery kits will be perfect.

The kit is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

It's time for our people to leave. We're sailing West and leaving everything in the mortal world behind. Take a good look around, because it's the last time you'll see- hey! Watch it with that crate! I don't care if you're loading up the boat, I'm trying to be pensive here!

There's no better way to leave the world of life than in a cool boat, and the Elven Docks has one of those! It also has a long pier and two smaller canoes (in case you're not fully committed to ending your mortal existence). For a dock in an Elven city, look no further!

The kit is made from 3mm MDF. It is easy to put together and looks great on the tabletop with other 28-35mm scenery.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

I can think of no finer place to propose to your loved one. Wait, what do you mean love is meaningless when you live for millennia? Wow, Elves really are mopey, aren't they?

With an upper storey supported by twin staircases, the Elven Pagoda is a finely detailed masterclass in Elf architecture. Sturdy yet exquisitely fashioned, it makes a perfect vantage point for archers, or a spot of tea.

The kit is made from 3mm MDF and 1mm greyboard. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Listen to the gentle strumming of some weird lute or something. The band is playing again in the pavilion. It's the same song, the song of our people. There is no beginning and no end. It just carries on like a stream. *yawn*

The Elven Pavilion is an excellent decorative piece of scenery. Supported by eight columns, this finely detailed kit adds a great centrepiece for an area of your board.

The kit is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Tobias Tubthumper gasped as he walked through the tall city walls and into the fabled Woodbine Glen. His travels had taken him to some amazing places, but nothing quite like this. The entire city seemed to glow from within, in a constant state of hazy afternoon fog. He wondered if any other Halfling had ever seen anything like it.

The sight was certainly something to behold, but Tobias was more interested in the rhythmic thumping he heard from over in the park. He felt the familiar beat in his heart, and knew that he needed to join the drumming.

As he wandered over the bridge though he smelled something like nothing he'd smelled before. Like bread, but gooey and sweet and somehow... yellow? He'd never tasted a colour before, but imagined that's what it would smell like. The drumming a distant memory, Tobias tottered off into the city, following his nose.

Elven Woodbine Glen is a collection of several different Elf kits, all combined into a great setting for your fantasy games. Inside you'll find the Elven Pavilion, Docks, Castle, Pagoda, and Bridge.

This kit is made from 3mm MDF and 1mm greyboard. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

I've heard tales of the person who owns this building, little is known about them apart from their love for hats and not just any old hats the fanciest hats around.

The Fancy Hat's Townhouse is a great addition to a table top with it's roof being removeable it allows you to wage the fights inside and outside the building not to mention it's fantastic aesthetic it truly is a great piece for the table top.

The Fancy Hat's Townhouse is made from 3mm MDF, is easy to put together and looks great on the tabletop. Great scenery to use with modern 28-35mm wargames or dioramas.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

''To the GATES! pretend we didn't forget the walls''.

Gatehouse! Windows! Horus! The Gateway of the Damned is your entry into fantasy scenery. This set of three separate gateway buildings make multiple entrees into your town. Three Gates in Four separate shapes make a great set for expanding your fantasy board, or a fantastic starting point for a fantasy city. The two part ruined gate can even be left split as a ruin or combined together to form a complete third gateway!

This kit is made from 3mm MDF. It is a great piece of scenery to use with 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

''These grand structures were called Tekhenu by they're builders...We'll just stick with Obelisk''.

The Grand Obelisk is a grand structure which towers over gaming boards. The Grand Obelisk is covered in hieroglyphs and rises into a single point. Detailed from multiple angles the Obelisk is a unique set which works great when deployed in the center of your game. This kit is made from 3mm MDF. It is a great piece of scenery to use with 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The Guardian Base is made from 3mm MDF. It is easy to put together and looks great on the tabletop. Great scenery to use with AoS and other 28-35mm wargames, or D&D. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

This is designed to fit the Dungeon Tile Sets. Each square is 25mm.

The Guardian Tower is made from 3mm MDF. It is easy to put together and looks great on the tabletop. Great scenery to use with AoS and other 28-35mm wargames, or D&D. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

This is designed to fit the Dungeon Tile Sets. Each square is 25mm.

The Guardian Watchtower is made from 3mm MDF. It is easy to put together and looks great on the tabletop. Great scenery to use with AoS and other 28-35mm wargames, or D&D. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

This is designed to fit the Dungeon Tile Sets. Each square is 25mm.

Chapter 3

Tobias Tubthumper was hungry. He'd been denied toast for his breakfast and he was on the way to rectify that. He plodded down to the farm, hoping to find farmer Cornwood before she left for town. Tobias poked his head into the barn to find nothing but straw, and saw that the shed was empty but for firewood - useful, but hardly the delicious meal he was after.

The Halfling Barn is a large construction for storing hay for goats and grain from the harvest but it can also double as a living space for a tame cockatrice should you have one. Its sloped roof provides shelter from the rain and the side shed gives ample space to stack up your firewood.

The kit is made from 3mm MDF. It is easy to put together and looks great on the tabletop with other 28-35mm scenery. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Chapter 8

Tobias had escaped the merchant, and was wandering through a wooded grove. He finished off crunching down the cabbage he'd taken and heard some clanging sounds.

Was is the noise of bread being made? Tobias had literally no idea, but was hopeful! He plodded out of the grove towards the noise and found no bread, but a blacksmith. He didn't really understand how a blacksmith worked, and - if he was honest with himself - didn't really care. He whistled to himself as he strode by noise of hammer meeting anvil, and followed a small stream downriver.

Even Halflings need swords and shields made. And Halflings especially need pots and pans, forks and spoons! That keeps the Halfling Blacksmith a busy place, and a great centrepiece or objective to fight over. The set contains a blacksmith's hut, a covered shed and a furnace.

Chapter 2

After eating ten fried eggs, a flank of ham, two bowls of soup, and a quiche, Tobias was still hungry. That wasn't much of a breakfast. He looked around his pantry and found nothing but crumbs. He needed some toast! He put on his hat and went searching for some bread. Outside of the door he wandered down to the stream and crossed the wooden bridge. The beams creaked beneath his bare feet, giving a slight percussion to the lapping of the water on the stones.

These Halfling Bridges allow your little halflings to move themselves, or their food, from one side of a river or body of water to the other side. the bridge is wide enough for a movement tray full of halfling warriors or carts of Cheeses, meat and other delectables to move over it.

The kit is made from 3mm MDF. It is easy to put together and looks great on the tabletop with other 28-35mm scenery. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

"Collecting the chapters of Tobias Tubthumper!"

Relive Tobias' adventures with the Craggy Bottom Village kit. This kit contains the Halfling Hamlet, Homestead, Barn, Blacksmith, Bridges, Watermill and Windmills.

The Halfling Craggy Bottom Village is made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Chapter 6

Tobias Tubthumper was hungry. He wanted bread for his breakfast, but at this point he'd take anything he could find. His trip to the Windmill had been in vain, but he'd unshackled the goat inside and was trying his best to ride it into town. It buckled and jumped a lot, but he clung on for dear life as it galloped down the road.

Before long they reached the entrance to Deathly Pastures and the goat finally got the better of him. Tobias was thrown clear into the centre of the graveyard, landing with a thud.

He stood up grumbling and looked around. It was clear that something spooky was going on here, and he had no time (or nerve) to face it. The wails whipping past the mausoleums were enough for him to turn tail and run straight out again.

Sooooo spoopy! The Halfling Graveyard is usually the dead centre of a Halfling village. Boom boom! It contains two mausoleums, two fences, a gate, a coffin and a well. It's a great set for detailing your board, or a couple together could make a large graveyard for all your Undead Halflings to enjoy!

The Halfling Graveyard is made from 3mm MDF and 1mm Greyboard. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.