Tired of jumping into your fancy gondola from the edge of the canal? Well, with these jetties you can walk out over the water with ease! Just make sure to bring a weapon with you as your risk of Rashaar attack is DRASTICALLY increased. 

This kit contains a whole load of jetty sections. With twelve individual sections that run from pristine to slightly worse for wear, all the way to broken in half, you'll have every type of jetty you need! The sections fit perfectly underneath the wooden streets, allowing you to realise Venice like never before.

The Wooden Jetties are made from 3mm MDF. They are great pieces of scenery to use on the tabletop for Carnevale and will work perfectly with other 28-32mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Can those meddling Guild stop running on my roof!

The Calle al Ponte da Lucca is a beautiful set of 3 buildings that offer a wide magnitude of options to the tabletop. They are of varying height allowing for Carnevale models to easily scale the buildings when used alongside each other. However these are also perfect to be split up and placed away from each other on a table top.

The Modular Venetian kits all work together to form something better than the sum of their parts. Using a handy clip system that the buildings sit on top of, you can link any of these kits together to create an intricate and complicated group of houses - the exact kind you find in Venice!

This kit is made from 3mm MDF and has been designed for Carnevale, using multiple storeys to climb and jump, and roofs at easy angles so that miniatures will not fall off when darting across the Venetian skyline. It is a great piece of scenery to use with other 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

I was hoping these monsters would have left after destroying my town. But no, they just live among us.

The Gèto del Pozzo is a once beautiful set of 5 buildings that offer a wide magnitude of options to the table top. They are of varying height allowing for Carnevale models to easily scale the buildings when used alongside each other. However these are also perfect to be split up and placed away from each other on a table top.

The Modular Venetian kits all work together to form something better than the sum of their parts. Using a handy clip system that the buildings sit on top of, you can link any of these kits together to create an intricate and complicated group of houses - the exact kind you find in Venice!

This kit is made from 3mm MDF and has been designed for Carnevale, using multiple storeys to climb and jump, and roofs at easy angles so that miniatures will not fall off when darting across the Venetian skyline. It is a great piece of scenery to use with other 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

My home was once so beautiful, now it's just a heap of rubble

The Gèto Rifformati is a once beautiful set of 3 buildings that offer a wide magnitude of options to the table top. They are of varying height allowing for Carnevale models to easily scale the buildings when used alongside each other. However these are also perfect to be split up and placed away from each other on a table top.

The Modular Venetian kits all work together to form something better than the sum of their parts. Using a handy clip system that the buildings sit on top of, you can link any of these kits together to create an intricate and complicated group of houses - the exact kind you find in Venice!

This kit is made from 3mm MDF and has been designed for Carnevale, using multiple storeys to climb and jump, and roofs at easy angles so that miniatures will not fall off when darting across the Venetian skyline. It is a great piece of scenery to use with other 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Catalya comes from a large family of wrestlers, although very few have become RUMBLESLAM Superstars!

Catalya is a born and bred wrestler, though her gladiatorial family have given her teeth in the ring!

Catalya is an expert support grappler, with a solid defence to boot. Not only does she bring some feline grace with the Feline special rule (that all Rostani share), she also spits straight fire! Her Catty by Nature Crowd Pleaser can even strip opposing wrestlers of their Crowd Pleaser, talk about a put down! We haven't even gotten to her Discus Clothesline, with Knockdown, it's the perfect setup for her other moves. Once Catalya has given both a literal and verbal beatdown, her Bow & Arrow Stretch can really put a pin in an enemy's day!

Contains 1 resin miniature, 1 character card, and 1 clear acrylic base. Acrylic bases will have coloured film on that needs removing before assembly.

Resin miniature supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

There are two things that this Djinn holds in higher regard than anything else: upholding the magical sanctity of the wish-granter, and FAMILY!

Djinn Diesel is here to grant Three Wishes to fellow wrestlers whilst rolling dice as fast and furiously as possible, just be careful not to lose his lamp!

This Superstar is a solid all-rounder but offers great support to friendly wrestlers thanks to his 'Three Wishes' ability. Starting the game with 3 Golden Dice, at any time after rolling dice with any friendly wrestler, that wrestler may choose to make a SINGLE wish and add a Golden Dice to their roll. That's some powerful magic! Djinn is always looking to unleash his Phenomenal Cosmic Powerbomb but be mindful of his 'Itty Bitty Living Space' as if he's KO'd, he returns to his lamp and counts as a weight 1 wrestler.

Contains 1 resin miniature, 1 character card, and 1 clear acrylic base. Acrylic bases will have coloured film on that needs removing before assembly.

Resin miniature supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

From an unknown galaxy, Colonel Russ has arrived through a Spacegate and joined the fun happening at the Diamond Oasis. Luckily for this sunglass wearing solider, he's got backup in the form of Stargator who owes a life debt to the Colonel.

Stargaters are a space warping, go down fighting kind of tag-team. You'll definitely need some T'LC after facing this duo in the ring!

The Stargaters are the latest Space Gate wielding wrestlers to arrive in the Diamond Oasis. Colonel Russ' is a good all rounder but is the squishier of this tag-team. Good thing he's got Stargator's super tough scales to make up for it. Not only does Stargator have a solid defence, he's also got a Big Bite! A hefty attack that inflicts Bleeding. Being part Alligator, Stargator knows how to roll, with his Death Glider Roll leaving his opponents dizzy.

Colonel Russ isn't without a few tricks of his own, for one he's brought a gun! Don't worry, it's only a Squirt Gun. Between his water pistol and Snake Eyes grapple, Russ can really put down some suppressive fire, dishing out -AP counters like he was in an action movie.

The pair of them bring some Space Gates. These can be set up in unoccupied spaces in the ring and when ANY friendly wrestler moves onto one they are teleported onto the second gate. Better yet, these Space Gates can't be used in any other way (including by enemies).

Contains 2 resin miniatures, 2 character card's, 2 Resin Space Gates and 2 clear acrylic bases. Acrylic bases will have coloured film on that needs removing before assembly.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

Tin Khan is the ruler of an entire province! Very little is known about the mysterious land, other than it is filled with other automatons. Although scholars say that the automatons are entirely devoid of feeling, anyone that has seen Tin Khan after a particularly devastating loss will know that the statement is definitely not true.

Tin Khan is a slow moving ruler of the ring! He is devastatingly strong, tough and thanks to being made entirely out of metal* is extremely difficult to throw out of the ring. When bouncing off the ropes you had best hope this wrestler doesn't steam roll over you.

Tin Khan is one of the most durable wrestlers in RUMBLESLAM. Thanks to being a living automaton, he hits hard and has a solid defence, especially with Heavy Metal reducing the damage Tin Khan takes. The unfortunate side effect of being made of metal is that you often end up super slow. Still, when you can't outrun your opponent, knock them down. Cogwrench Suplex swaps the Khan's and his targets position, and knocks them down, ready for a metal fist to an unsuspecting face. Camel Clutch is a great option for those high AP characters that might run rings around the Khan. When the Khan manages to pass a crowd pleaser he turns into a veritable juggernaut, but be careful, Overclock also causes Tin Khan to lose stamina.

*Contains 1 resin miniature, 1 character card, and 1 clear acrylic base. Acrylic bases will have coloured film on that needs removing before assembly.

Resin miniature supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

Some say this raucous tavern really comes alive at dusk, but those who live near it know that the sounds of drinking and music never really die down.

This two storey tavern looks like the architect was drunk when the planning went through, Angular walls and a steep pitched roof look like the building should not stant without external support. Perhaps magic? Perhaps the sheer force of will from the drunks inside, who can tell!

Each section of this kit can be removed and the interior is fully playable just in case a bar room brawl kicks off. This would make a great centrepiece for any village board, especially combined with other buildings from the range.

Agatha's Stone Moon Tavern is made from 3mm MDF, is easy to put together and looks great on the tabletop. Great scenery to use with modern 28-35mm wargames or diorama's.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The Bell Tower is made from 3mm MDF, 1mm Greyboard and acrylic. It is easy to put together and looks great on the tabletop. Great scenery to use with AoS and other 28-35mm wargames. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Cosy cottages, brick built with characterful pitched rooves. Could anyone find anywhere more homely?

The Briar rose cottages are great fantasy houses to fill out a quiant little village on any game board. With a non-standard construction, the walls and rooves are angle to give a more whimsical feel, different from the rest of our fantasy range.

Each building has a removable roof with a playable interior and the stick on wooden details really give it that three dimension feel and lots of places to really pick out that dry brushing.

The Briar Rose cottages are made from 3mm MDF, are easy to put together and look great on the tabletop. Great scenery to use with modern 28-35mm wargames or diorama's.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Now this is a vantage point! Some say the Wizard that occupies this tower has control of the entire battlefield.

Captain Bamboozle's Wizard Tower, is an excellent piece of scenery for a table top with it towering over the battlefield it makes for a great strategic location not to mention it's impressive look it will be a real eye catcher.

Captain Bamboozle's Wizard Tower is made from 3mm MDF, is easy to put together and looks great on the tabletop. Great scenery to use with modern 28-35mm wargames or diorama's.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

This Castle Set is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with Wargaming . Model supplied unpainted and will require assembly. We advise using PVA glue for the best results. (This item is cut to order)

The Deluxe Dungeon Sections are made from 3mm MDF, easy to put together and look great on the tabletop. Great scenery to use with fantasy gaming, and D&D. Models supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Each square is 25mm scale. Walls are 4.5cm tall.

Each set includes 2 small Deluxe Dungeon Sections.

The Sections can be placed in any combination.

The Deluxe Dungeon Sections are made from 3mm MDF, easy to put together and look great on the tabletop. Great scenery to use with fantasy gaming, and D&D. Models supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Each square is 25mm scale. Walls are 4.5cm tall.

Each set includes 2 small Deluxe Dungeon Sections.

The Sections can be placed in any combination.

The Deluxe Dungeon Sections are made from 3mm MDF, easy to put together and look great on the tabletop. Great scenery to use with fantasy gaming, and D&D. Models supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Each square is 25mm scale. Walls are 4.5cm tall.

Each set includes 2 small Deluxe Dungeon Sections.

The Sections can be placed in any combination.

The Deluxe Dungeon Sections are made from 3mm MDF, easy to put together and look great on the tabletop. Great scenery to use with fantasy gaming, and D&D. Models supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Each square is 25mm scale. Walls are 4.5cm tall.

Each set includes 2 small Deluxe Dungeon Sections.

The Sections can be placed in any combination.

The Deluxe Dungeon Set is made from 3mm MDF, easy to put together and look great on the tabletop. Great scenery to use with fantasy gaming, and D&D. Models supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Each square is 25mm scale. Walls are 4.5cm tall. The Sections can be placed in any combination.

The Deluxe Dungeon Set includes:

• 2 x Straight Sections
• 2 x Corner Sections
• 2 x Crossroad Sections
• 2 x T-Junction Sections
• 1 x Large Straight Section
• 1 x Large Corner Section
• 1 x Large Crossroad Section
• 1 x Large T-Junction Section
• A selection of accessories, including;
  • 1 x Bed,
  • 1 x Torture Rack,
  • 1 x Round Table,
  • 4 x Chairs,
  • 1 x Shelves,
  • 1 x Bookshelf,
  • 1 x Sarcophagus,
  • 2 x Candelabras,
  • 1 x Large Bench,
  • 2 x Small Benches,
  • 1 x Iron Maiden,
  • 1 x Trapdoor,
  • 1 x Vent,
  • 1 x Small Box,
  • 1 x Large Box,
  • 1 x Executioners Block.

The Deluxe Dungeon Sections are made from 3mm MDF, easy to put together and look great on the tabletop. Great scenery to use with fantasy gaming, and D&D. Models supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Each square is 25mm scale. Walls are 4.5cm tall.

Each set includes 1 Large Dungeon Section.

All Variants can be used together in any layout

The Deluxe Dungeon Sections are made from 3mm MDF, easy to put together and look great on the tabletop. Great scenery to use with fantasy gaming, and D&D. Models supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Each square is 25mm scale. Walls are 4.5cm tall.

Each set includes 1 Large Dungeon Section.

All Variants can be used together in any layout