Bandai Namco. Ages 6+. Tools and Glue not required. Plastic is pre-colored. The product requires assembly. The completed product in the image has been painted. The actual product may vary slightly from the images on the package. The images are for illustrative purposes only. Made in Japan.

From Idolmaster Shiny Colors, Straylight's "Mayuzumi Fuyuko" is turned into a 30MS format figure! This is an all-in-one item that includes parts for the entire body. Actual products are sold separately. Color A skin tone. 15+

30 Minute Sister costume parts set 17, Aider Costume with Color A torso parts and blond pigtail hair parts. A variety of option parts such as ring parts, joint parts, etc. are included. This product includes special parts for "30 Minutes Sisters" series kits. Products other than "30MS Option Parts Set 17" are sold separately. Images are for illustrative purposes only.

30 Minute Sister costume parts set 18, Sergeant Costume with Color C torso parts and white pigtail hair parts. A variety of option parts such as ring parts, joint parts, etc. are included. This product includes special parts for "30 Minutes Sisters" series kits. Products other than "30MS Option Parts Set 18" are sold separately. Images are for illustrative purposes only.

Bandai Namco Bandai Spirits 2025

15+
Plastic Model Kit

High Grade Mobile Suit Gundam GQuuuuuuX: MS-06-SSP Police Zaku
HG 1/144 Bandai Spirits 2025 Made in Japan

8+

Bandai Namco. Ages 6+. Tools and Glue not required. Plastic is pre-colored. The product requires assembly. The completed product in the image has been painted. The actual product may vary slightly from the images on the package. The images are for illustrative purposes only. Made in Japan.

Contains Piplup, Prinplup, Empoleon and a bonus Pikachu

Bandai Namco. Ages 6+. Tools and Glue not required. Plastic is pre-colored. The product requires assembly. The completed product in the image has been painted. The actual product may vary slightly from the images on the package. The images are for illustrative purposes only. Made in Japan.

Contains Chimcar, Monferno, Infernape and a bonus Pikachu

Bandai Namco. Ages 6+. Tools and Glue not required. Plastic is pre-colored. The product requires assembly. The completed product in the image has been painted. The actual product may vary slightly from the images on the package. The images are for illustrative purposes only. Made in Japan.

Contains Turtwig, Grotle, Torterra and a bonus Pikachu

Bandai Namco. Ages 6+. Tools and Glue not required. Plastic is pre-colored. The product requires assembly. The completed product in the image has been painted. The actual product may vary slightly from the images on the package. The images are for illustrative purposes only. Made in Japan.

Bandai Namco. Ages 6+.

It comes with a pedastal!

Tools and Glue not required. Plastic is pre-colored. The product requires assembly. The completed product in the image has been painted. The actual product may vary slightly from the images on the package. The images are for illustrative purposes only. Made in Japan.

30MM 30 Minute Missions Armored Core VI Fires of Rubicon. 8+. Option Parts Set 04 Weapon Set 04. Weapons
Contains

• DF-GA-08 Hu-Ben Gatling Gun
• DF-ET-09 Tai-Yang-Shou Explosive Thrower
• BML-G1/M20MLT-04 Missile
• BML-G2/P17SPL-16 Split Missile

Other products sold separately.

1/1000 Scale Ages 15+
Banda Namco
Bandai Spirits 2024

Bandai Spirits Entry Nipper (Red). Bandai Namco. Made in Taiwan. S-50C High Carbon Steel. Hardness HRC45-50. Cutting Capacity plastic 1mm. Surface treatment Blackened (parkerized surface).

Apply the blades and cut at a position slightly away from parts. Apply the blades right next to the parts to remove gate marks.

Nippers have sharp tips and edges due to their functionality and can be dangerous. Keep out of reach of children under six years of age. This product is not an electrically insulated tool. Do not cut wires or other electrical appliances. Please use protective goggles for safety when using the product Please be careful of parts that fly off when cutting.

Please have a guardian cut parts off for mall children. The nippers are sharp to cut the runners. Please use them carefully without injuring yourself. The products are nippers for cutting plastic. They are not intended for use outside of plastic model making. Never use on steel wires or other hard materials that may chip or break the thin blades. Do not leave the nippers lying around and keep them in their cases after use, storing them out of reach of children under six years of age.

Marker style paint for Gunpla. Gundam Marker Basic Set. 6 colors included. GM06 Gundam Blue, GM07 Gundam Red, GM08 Gundam Yellow, GM11 Gundam White, GM22 Gundam Gun Metallic, GM21 Gray Brush Tip Marker (wipe off type) for panel line.

Marker style paint for Gunpla. Gundam Marker Fine Edge Set 1. 6 colors included. GM46 Gundam Red, GM47 Gundam Yellow, GM48 Gundam Black, GM50 Gundam Fluorescent Pink, GM51 Metallic Green, GM184 Gundam New White.

For complicated or delicate parts such as face or vernier thrusters. Before using, shake the marker with cap on so that the ball inside mixes the ink. Be careful when opening the cap in case the ink fills up the cap. Push the tip of the marker against a piece of paper for several times until the ink comes out. Do not push the tip too hard as the ink may drip. If the ink does not come out smoothly, repeat first and second steps.

Let an adequate amount of ink to cover the tip and apply on the surface with little pressure. Drawing with markers with pressure may result in unevenness of the ink. For a neat finishing, apply 1 coat only for each part. The ink may separate if not used for a while. In that case, put the cap on the marker and shake well. Then, push the tip against tissue paper and let the tissue paper absorb the ink. The marker is ready to use once the color of the ink looks evenly mixed.

Marker style paint for Gunpla. Gundam Marker Gundam Seed Basic Set. 6 colors included. GM40 Seed Red, GM41 Seed Yellow, GM42 Seed White, GM43 Seed Blue, GM44 Seed Gray, and GM45 Seed Dark Blue.

Gundam Metallic Marker Set 2. 6 Colors included. Includes GM172 Metallic Black (for body, equipment, frames), GM172 Metallic Blue (for body metallic), GM174 Metallic Yellow Green (for body, camera eyes and sensors), GM175 Metallic Orange (for body and psycho-frame), GM176 Metallic Pink (for body, mono-eye and sensors), and GM177 Shine Silver (for body, equipment, and frames).

Before using, shake the marker with cap on so that the ball inside mixes the ink. Be careful when opening the cap in case the ink fills up the cap. Push the tip of the marker against a piece of paper for several times until the ink comes out. Do not push the tip too hard as the ink may drip. If the ink does not come out smoothly, repeated first and second steps.
Let an adequate amount of ink to cover the tip and apply on the surface with little pressure. Drawing with markers with pressure may result in unevenness of the ink. For a neat finishing, apply 1 coat only for each part. The ink may separate if not used for a while. In that case, put the cap on the marker and shake well. Then, push the tip against tissue paper and let the tissue paper absorb the ink. The marker is ready to use once the color of the ink looks evenly mixed.

Gundam Metallic Marker Set. 6 Colors included. Includes GM151 Gundam Metallic Gold (for Gundam's antenna or duct), GM152 Gundam Metallic Silver (for blade of weapons), GM153 Gundam Metallic Blue (for blue colored body), GM154 Gundam Metallic Green (for Gundam's camera eyes), GM155 Gundam Metallic Red (for red colored body), GM20 Wipe Off Black (for enhancing panel lines).

Before using, shake the marker with cap on so that the ball inside mixes the ink. Be careful when opening the cap in case the ink fills up the cap. Push the tip of the marker against a piece of paper for several times until the ink comes out. Do not push the tip too hard as the ink may drip. If the ink does not come out smoothly, repeated first and second steps.
Let an adequate amount of ink to cover the tip and apply on the surface with little pressure. Drawing with markers with pressure may result in unevenness of the ink. For a neat finishing, apply 1 coat only for each part. The ink may separate if not used for a while. In that case, put the cap on the marker and shake well. Then, push the tip against tissue paper and let the tissue paper absorb the ink. The marker is ready to use once the color of the ink looks evenly mixed.

GM20 is a water-based brush type marker suitable for panel lining. Special water-based ink can be applied on painted surfaces as well. The excess ink can be wiped off with a cloth, cotton bud or tissue paper.

Marker style paint for Gunpla. Gundam Marker MSV Set. 6 colors included. GM185 MSV Dark Yellow, GM186 MSV Red Brown, GM187 MSV Dark Green, GM188 MSV Light Blue, GM189 MSV Brown Green, GM190 MSV Dark Gray.