The skeletons of Deathly Pastures are a familiar sight to the Halflings of Craggy Bottom. Their long deceased ancestors, risen again from the grave. Of course, the Halflings don't give much attention to them mostly. More often than not the complaints aren't about the dead walking in an unholy fashion, but that the wails keep them up at night.

This set contains a regiment of 20 Skeleton Halfling Warriors, including a full command of Champion, Standard Bearer, and Musician. There are several different designs of Warriors, and you'll get a random selection to give plenty of variation to your regiments.

Contains 20 resin miniatures with bases. Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

The Civitalis Ruins contains 7 corner ruins ranging from 1 storey to 3 stories in height. Alongside this the kit comes with 3 large crates and 2 small crates. The Civitalis Ruins have been designed for competitive play and will fill a 3x3 gaming board. Whilst providing these competitive features the Civitalis Ruins is ideal for new hobbyists as well as experienced hobbyists.

The Civitalis Ruins is made from 3mm MDF. It is a great scenery kit to use in sci-fi skirmish games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

This set contains a lot of conversion parts for your Modular Space Stations. This resin upgrade kit will allow you to change your space stations to be under Scourge control. There are parts included that will fit on the already versatile Modular Space Station Pack, affording you almost unlimited potential to create warped, alien stations.

While you can make rather small Scourge Space Stations with this set alone (you'll need some extra bases though), it is an upgrade set designed to be used alongside the Modular Space Stations.

Contains 36 resin parts. Contents may vary from those shown.

The support ships that escort the Flagship vessels of the Enlightened Fleets fill some very specialist roles. The Plinius Support Carrier carries dozens of Scythe Drones and can launch them from hydraulic ramps. This allows the Plinius to partially submerge when the ramps are closed making it very difficult to see and target. Built around the same hull as the Plinius are a number of other Cruisers. The Quintilian bombardment cruiser mounts heavy rockets that it can launch at distant targets before returning below the waves. The Tacitus Assault Cruiser favours two hardpoints for turrets, most often Particle Beamers. The Claudius Merchantman is designed with extra hull space and is the backbone of Enlightened logistics, the ingenious engineers still managing to squeeze in a number of torpedo launchers to protect them from pirates and other hostiles.

While these Cruisers are able to lurk just below the surface the Diogenese and Praxilla Class Submarines are able to operate at significant depths. These large Automata operate under a number of pre-programmed subroutines and are effective at hunting down and destroying enemy vessels.

The Enlightened Support Squadrons kit builds eight multi-part plastic miniatures;

• 2x Plinius Cruisers
  • Each Cruiser can alternatively be built as either Quintilian, Tacitus and Claudius Class
• 6x Praxilla Submarines
  • Each Submarine can alternatively be built as a Diogenese Class
• 2x SRS Tokens
• 2x Physeter Tokens

Please note:

• Miniatures are supplied unpainted and some assembly will be required.
• Unit Cards are not included and can be found on the Dystopian Wars website.

The Tianlong Draconic Colossus uses a combination of rotor engines and repulsion fields to remain aloft. Originally created to patrol the airspace near the Zhanmadao Sky Fortresses and Ziwei Sky Bastions, the Tianlong swoop down, their skilled crews getting the most out of these marvels of Engineering. The Tianlong can be outfitted with different weapons located in the mouth and tail. The choice of the Heavy Huoqiang or the Heat Lancette is a difficult one for most Captains to make. The Heavy gun battery can also be removed in favour of additional crew space to house a squadron of Bushi Ryu. These highly trained Samurai use rocket-propelled armour to descend to assault enemy vessels in hand to hand combat.

Despite the fact that King Sun Li of Korea holds responsibility for all air technology the Emperors Ming and Shinuza have utilised a loophole to jointly commission the construction of a Draconic Colossus to provide air support for their own units. This has caused some amount of frustration for The Cloud Dragon and he has tried to have the Colossi decommissioned or brought under his oversight on several occasions. The Forum, however, has resisted such moves to dismantle such magnificent symbols of the Empire.

There are occasions when squadrons of Tianlong are sent on strike missions, if so they are often supported on the sea by Gong destroyers. These fast, but well-armed vessels are ideal for long-range, fast attacks, complimenting the Draconic Colossi well.

The Tianlong Battlefleet Set kit builds nine multi-part plastic miniatures;

• 3x Tianlong Draconic Colossus
• 6x Gong Destroyers

Please note:

• Miniatures are supplied unpainted and some assembly will be required.
• Unit Cards are not included and can be found on the Dystopian Wars website.

For the last three decades, the Victory class Heavy Carriers has been a dominating force around the globe. They demonstrate the huge significance that naval strength plays in all Crown military campaigns. As an island nation, the British consider the seas and oceans of the world as essential to hold their Dominions together. The Victory and her aircraft ensure that remains so. With an internal hanger that is rivalled only by the experimental Ice Maiden of the Imperium, A Victory can launch dozens of Defiant fighters into the skies to defend the fleet from incoming bombers or to hammer the decks of her enemies with their rapid firing Vickers Automatic Guns.

Its aircraft are not the Victory's only defence of course. It is armed with three Mark VII Congreve rocket turrets, giving them significant long-range engagement capabilities. While the Victory is no spring chicken, its solid design and advanced Crown engineering make it capable of keeping up with newer classes of ship.

Alongside the Victory Heavy Carriers are found, not only the common Frontline Squadrons but also Support Squadrons. The Hotspur Support Carriers add additional fighter Support. It is common for Hotspur captains to drive their ships at full speed towards the enemy, hoping that their large engines give their Defiant strike fighters an optimal launch position. The Agincourt Bombardment Cruisers are armed with the dreaded Taranis Naval Mortar, capable of hurling all manner of projectiles up to a range of over fifteen miles.

The Athelstan Flak cruiser provides a screen of anti-aircraft fire to ensure that the Defiant Squadrons hit their targets and to defend the decks of the Crown vessels. A Squadron of Athelstan's was used on the Thames to celebrate the Queen's Pearl Jubilee, firing magnesium pyrotechnics above the city to mark the occasion.

The Excalibur Heavy Destroyers are also typically found with the Victory class ships. Their role is to deter smaller attack vessels from swarming the immense Carrier.

The Victory Battlefleet Set kit builds nineteen multi-part plastic and resin miniatures;

• 1x Victory Class Heavy Carrier
• 3x Morgana Submarines
• 3x Albion Cruisers (Each Cruiser can alternatively be built as either Lancelot, Picton, Bedivere or Sabre Class)
• 6x Caliburn Frigates
• 3x Agincourt Cruisers (Each Cruiser can alternatively be built as either Athelstan or Hotspur Class)
• 6x Excalibur Destroyers
• 3x SRS Tokens

Please note: Miniatures are supplied unpainted and some assembly will be required. Unit Cards are not included and can be found on the Dystopian Wars website.

The Peers of the Covenant of the Enlightened often perform elaborate and sometimes dangerous experiments using the most powerful technologies known to humanity. In order to ensure that they have all the assets required for such work they typically create labyrinthine and eccentric laboratories for themselves. It is not without some irony that these sprawling structures have been collectively named Promethean Complexes. Each complex is fully self-sufficient, using its own power source, fuel and other consumables, whatever they might be. More often than not, in order to contain explosions and noise as well as retaining complete anonymity and secrecy, they build on existing mineworks or new excavations to be contained largely underground, with esoteric and blunt looking iron and steel structures jutting out across the surface forming into a small estate or settlement.

This 28mm - 40mm MDF terrain Warcradle Scenics Promethean Complex Set is ideal for all your Sci-fi, Gothic and Industrial tabletop games.

This set contains;

• 1x Refinery
• 1x Derrick
• 1x Forge
• Walkways
• 1x Crane Tower
• 2x Mine Entrances

Please note: Scenery items are manufactured in Medium Density Fibre Board (MDF). Buildings are supplied primed and some assembly will be required. Assembly instructions can be found online and by scanning the QR printed on the packaging.

Wild West Exodus is a dynamic, fast-paced tabletop miniatures game pitting a cast of heroic characters against each other in a brutal world - very much a twisted reflection of our own. In the twilight years of the Nineteenth Century, mankind is perched upon a new age of discovery and enlightenment.

The Wild West Exodus Rules & Gubbins Set contains all the tools you need to play. Just grab this box and your favourite Posse (or two) and you are ready to start clashing against your opponents in the West.

The Wild West Exodus 3rd Edition Rules & Gubbins Set contains

• 1x Rulebook
• 1x Action & Adventure Card Deck
• 1x Template Set
• 4x Dice
• 1x Condition Token Sets

Since Armstrong Custer's famous charge leading the Michigan Wolverine's at Gettysburg, the Iron Horse has become a ubiquitous machine across the frontier. Their combination of speed, firepower and durability led to a massive Union contract with the Covenant of the Enlightened during the Ore War, replacing flesh and blood horses in all cavalry regiments. Now more than a decade later, Iron Horses have become easy to obtain, with Union surplus and frontline shipments making their way onto the black market in vast numbers and the machinery itself proving to be simple to maintain with spare-parts in abundance. While older marks and models of Iron Horse prove to be a little on the temperamental side, the Iron Horse's popularity and variety of designs can be found in use across the Union and beyond.

The Blazer was first used by the Confederate Army during the Battle at Gaine's Mill. The Iron Horse was still in limited service in those early days of the Ore War, but already its endurance and potential were obvious. Twenty-six Iron Horses were heavily modified in the field to mount additional gatling guns and armour plating to shield their riders from the huge attention of enemy fire they would receive once they began their attack. With General John Bell Hood on the lead Blazer, the Confederates tore a bloody hole in the two-mile-long Union flank and the day was carried, despite massive casualties on both sides in the 50,000 soldiers that fought that day. By the time of Gettysburg, both sides had units of Blazers fighting alongside their Iron Horse Cavalry and Blackhooves.

Uniquely found in the Union arsenal, the Iron Eagle is seen by many as the pinnacle of technological evolution for the Iron Horse. More than the replacement of the RJ engine with a voltaic power plant, the Iron Eagle boasts additional armor and electro-weaponry. As the ultimate statement that the Iron Eagle represented the future of Union military prowess, Nikolai Tesla incorporated specially programmed UR-31E Automata to pilot these new machines, giving them a resilience unmatched in the field by other cavalry.

This product contains:

• 2x Iron Horses
  • Each Iron Horse can also be built as either a Blazer or a Union Iron Eagle. It contains riders for Enlightened, Union, Outlaws, Hex and Lawmen.

Please note:

• Miniatures are supplied unpainted and some assembly will be required.
• Character Unit Cards are not included and can be found on the Wild West Exodus website.

As the war fought above and below ground intensifies all sides are pushed to find more weapons and soldiers to turn the tide in their favour. The Council of Shadows is no different and selects the bravest and foolhardiest of the bakemono warriors to capture and master the beasts that live in the shadows. Only the few survive, but those that do are able to ride these murderous monsters into battle with devastating effect.

Blister contains one miniature and full colour profile cards. Note that this model requires a beast to ride - sold separately. The Nian or a Cave Bat.

A lot could be said for the subterranean races’ savage and cruel practices however their ability to adapt and change based on the environment and resources available cannot be ignored, their resourcefulness is something to be admired when considering the scarcity of materials offered in the dark places they claim as their own. Now with the world in turmoil, ravaged by war, the bakemono tribes pick the battlefields clean like maggots at a wound. This has led to the advancements of the Prefecture being turned against them. The boomers are one such example of this, two brave and possibly a little stupid bakemono eagerly working the famous ryu arquebus to deadly effect.

Blister contains two miniatures supplied with a 40mm base and full colour profile card.

Another young Oni joins the ranks of the Savage Wave. Boba is a wicked shot, picking enemies off at will. When he channels his Ki he can lob his heavy iron shots with disconcerting accuracy. Those that have felt themselves safely out of his range are only proved wrong once.

Blister contains one miniature, 40mm base and full colour profile card.