• Miscellaneous structures make up the bulk of any industrial complex. What they do is best left to mystery, or those with the relevant qualifications.

    Tri Platforms offer a versatile structure for industrial boards, designed to work well with all of our other 10mm Sci-Fi X industrial terrain. These buildings can be used alone, or as a set of 3, or as addons to something like the Exhaust Towers.

    This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone Commander and will work perfectly with other 10mm games.

    Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

    MSRP $16.80

    Released on April 25, 2022

    $13.44

  • Some say you can drop a ship from orbit onto a Tyrosus Building and still be safe and sound within its confines. Although no human is able to verify these claims the Scourge seem to do very little to modify these buildings in occupied territory.

    Originally designed as an armoured fortress capable of receiving high ranking dignitaries via helicopter or flying car. With an innovative fly-through runway the building uses its bulk to protect its occupants while they exit their vehicles. While it did it's job as a fortified bunker during the Scourge invasion, it may have performed too well, keeping its occupants safe from danger, at least until the Scourge cut their way into the armoured core of the building.

    This building is HUGE and we would recommend using this as a linked structure of 8 small hardened outer buildings, and a single large hardened building in the centre. This building is a great centrepiece to fight over and looks imposing, even next to taller buildings.

    Made from 3mm MDF and 1mm greyboard, this kit stands at 20cm high and is designed for games of Dropzone Commander, but will work perfectly with any similar scale games. Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

    MSRP $46.50

    Released on April 25, 2022

    $37.20

  • Normally aircraft hangars are built above ground, this one however is special, as it's primarily been built underground.

    This kit contains 2 Underground Hangars and 8 tiny satellite dishes. Perfect for surprise attacks from out of nowhere or storing your aircraft where they won't get sunburned.

    Underground Hangars are made from 3mm MDF. Designed for Dropzone Commander, they'll work perfectly well in any other 10mm sci-fi wargame.

    Model supplied unpainted and requires assembly. Some kits will need cutting and sanding for a perfect fit - always dry fit your models first for best results. We advise using PVA glue for assembling. Any miniatures are for scale only and not included.

    MSRP $14.00

    Released on April 25, 2022

    $11.20

  • The Utopia Building is made from 3mm MDF and 1mm greyboard. It is easy to put together and looks great on the tabletop. Great scenery to use with Epic and Dropzone Commander, or other 10mm wargames. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

    MSRP $16.80

    Released on April 25, 2022

    $13.44

  • V-Motors used to be real nice back in the day. Nowadays all you see driving them are influencers and jellies.

    The V-Motors Factory contains 1 large factory building and 1 small mechanic's garage. The Large building comes with plenty of entrances and a few walkways for troop access as well as a lot of roof space to play on as well. The smaller mechanic's garage comes with a choice of sign and the garage area is large enough to fit Resistance technicals and Jackson APC's

    The V-Motors Factory is made from 3mm MDF. Designed for Dropzone Commander, they'll work perfectly well in any other 10mm sci-fi wargame.

    Model supplied unpainted and requires assembly. Some kits will need cutting and sanding for a perfect fit - always dry fit your models first for best results. We advise using PVA glue for assembling. Any miniatures are for scale only and not included.

    MSRP $24.00

    Released on April 25, 2022

    $19.20

  • "An Iconic New York design"

    The West Side Brownstones are made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone and will work perfectly with other 10mm games.

    Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

    MSRP $21.00

    Released on April 25, 2022

    $16.80

  • The Blood Drops wound markers are made from 3mm coloured acrylic. Pack contains 8 blood drops. Great to use on the tabletop for wargames, 40K etc.

    Backorder

    MSRP $2.80

    Released on April 23, 2022

    $2.80

  • The Dice Tower is made from 3mm MDF, and is easy to put together. Model supplied unpainted and will require assembly. Can be flat packed. Stops dice from rolling off the table!

    No glue required!

    MSRP $16.50

    Released on April 23, 2022

    $13.20

  • The Fleet Condition Token Set is made from 3mm coloured acrylic. They are great to use with games like Dropfleet Commander.

    Pack contains 28 x tokens

    • 4x Armour Cracked
    • 4x Energy Surge
    • 4x Engines Disabled
    • 4x Fire Condition
    • 4x Orbital Decay
    • 4x Scanners Offline
    • 4x Weapons Offline

    Backorder

    MSRP $9.80

    Released on April 23, 2022

    $9.80

  • Made from 3mm blue and yellow acrylic these templates have a 3", a 2", a 1", and a 0.5" side.

    Backorder

    MSRP $5.60

    Released on April 23, 2022

    $5.60

  • The Psychic Power Markers are made from 3mm coloured acrylic. Pack contains 8 markers. Great to use on the tabletop for wargames, 40K etc.

    Backorder

    MSRP $2.80

    Released on April 23, 2022

    $2.80

  • The Ruler is made from 3mm coloured acrylic. It measures 6 inches along one side and 2 + 4 along the other. One end is 1 inch wide and the other is 2 inches. Each inch marker is numbered.

    Backorder

    MSRP $2.80

    Released on April 23, 2022

    $2.24

  • The Ruler is made from 3mm coloured acrylic. It measures 6 inches along one side and 2 + 4 along the other. One end is 1 inch wide and the other is 2 inches. Each inch marker is numbered.

    Backorder

    MSRP $2.80

    Released on April 23, 2022

    $2.80

  • The Ruler is made from 3mm coloured acrylic. It measures 6 inches along one side and 2 + 4 along the other. One end is 1 inch wide and the other is 2 inches. Each inch marker is numbered.

    Backorder

    MSRP $2.80

    Released on April 23, 2022

    $2.80

  • The Ruler is made from 3mm coloured acrylic. It measures 6 inches along one side and 2 + 4 along the other. One end is 1 inch wide and the other is 2 inches. Each inch marker is numbered.

    Backorder

    MSRP $2.80

    Released on April 23, 2022

    $2.80

  • The Ruler is made from 3mm coloured acrylic. It measures 6 inches along one side and 2 + 4 along the other. One end is 1 inch wide and the other is 2 inches. Each inch marker is numbered.

    Backorder

    MSRP $2.80

    Released on April 23, 2022

    $2.80

  • These Skulls wound markers are made from 3mm coloured acrylic. The pack contains 8 skulls. Great to use on the tabletop for wargames, 40K etc.

    Backorder

    MSRP $2.80

    Released on April 23, 2022

    $2.80

  • These Skulls wound markers are made from 3mm coloured acrylic. The pack contains 8 skulls. Great to use on the tabletop for wargames, 40K etc.

    Backorder

    MSRP $2.80

    Released on April 23, 2022

    $2.80

  • These Skulls wound markers are made from 3mm coloured acrylic. The pack contains 8 skulls. Great to use on the tabletop for wargames, 40K etc.

    Backorder

    MSRP $2.80

    Released on April 23, 2022

    $2.80

  • These Skulls wound markers are made from 3mm coloured acrylic. The pack contains 8 skulls. Great to use on the tabletop for wargames, 40K etc.

    Backorder

    MSRP $2.80

    Released on April 23, 2022

    $2.80

Showing 961 to 980 of 1673 results

items per page

Show filters