Battlewalkers are smaller, more agile versions of the towering Warstriders. They feature anti-grav assistors and clamps on their legs and feet, allowing them to climb sheer surfaces to attack from above! These factors - coupled with increased survivability over most Shaltari grav-tanks - makes Battlewalkers highly popular with less subtle Warchiefs who would prefer to crush their opponents than out-manoeuvre them.

The Tarantula's primary armament is the highly advanced Gravatic Magnifier (also known simply as the Grav-Cannon). This weapon delivers crushing force to anything with mass - the larger and heavier the target, the more devastating its effect!

The Birdeater is an anti-air Battlewalkers, armed with the familiar and lethal twin ion-cannon. It often employs its climbing abilities to gain a commanding view of the battlefield - a highly useful ability for an anti-air unit. Since it is less agile than the Kukri, it is better suited to more static defensive roles, where its superior survivability makes it a favourite of the Shaltari Warchiefs who favour heavier units.

The Battlewalker is a ubiquitous chassis in a Shaltari army, particularly if you like your units to be able to take a bit of punishment. With Armour 13 and 2 Damage Points, this is one walker that won't quit - and that's if you get through its standard Shaltari 5+ Passive save. Battlewalkers also have the unique ability to climb scenery pieces, getting to the top of a structure with no problem, able to make the best use of great firing lines.

A Tarantula is a Standard choice in a Shaltari army, so you can take loads of them! Its Gravity Cannon is Energy 11 and has Devastator-2 against Tanks and Walkers, which already makes it a very useful weapon. However, the the bigger the target, the more gravity there is on it (it's science), so anything with the Large special rule gets hit with Devastator-3 instead!

Meanwhile the Birdeater variant swaps its main armament for the classic Twin Ion Cannons. Equally as good at anti-air firepower as its Kukri cousin, the Birdeater provides an extremely stable chassis for your AA squad. These walkers will be particular thorns in the side of your opponents!

Contains 2 resin miniatures with a choice to make 2 Tarantulas or 2 Birdeaters. These miniatures are highly detailed, approximately 50mm in length.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

The Warspear is a formidably equipped, multi-role heavy fighter. Its primary armament is a pair of heavy ion cannons, giving it awesome air-to-air destructive power. Very few aircraft can withstand a volley from these devastating weapons. It is an superb and agile dogfighter, most often employed as a interceptor. Some Warspears are armed with an infantry killing Heavy Bio-Atomiser. This weapon is an up-scaled version of that found on Shaltari Ronin, its destructive power is not to be underestimated.

The Warspear is an incredibly powerful fast flyer. With Twin Heavy Ion Cannons this ship is extremely capable of taking down other Aircraft - often in a single volley! And that's without considering the underslung Gauss Cannon which - with potentially infinite range - can destroy enemy heavy vehicles from anywhere on the board. Swap out the Gauss Cannon for a Heavy Bio-Atomiser to hurt enemy infantry in buildings from the air!

Contains 2 multi-part resin miniatures with parts to arm all with either Gauss Cannons or Heavy Bio-Atomisers.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

The Yari is the Shaltari's lightest and fastest ground unit. Indeed, it's moves at such a pace that it can compete with some aircraft! The use of advanced communications in addition to this blistering speed makes the Yari an excellent scout unit.

Armed with a Microwave Cannon for killing infantry hiding in garrisons and cover or a Light Ion Cannon for taking out aerial targets, the Yari is a fast way to bring death to the enemy. The Tate is a new development, swapping its weapon for a Shield Boosting Node. With its fast speed, this means the Tate can deliver a shield booster to forces under attack, turning the tide of a firefight to the Shaltari's favour.

Contains 4 multi-part skimmers that can be assembled as either a squad of Yaris or a squad of Tates. 10mm in scale with a length of 31mm.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled

The Slayer Heavy Tanks bring terrible weaponry to bear, and not all of it is from the guns. They also have another, no less frightening trick up their sleeves: inside their armoured bowels is a set of habi-tubes, able to cage a trio of lethal Razorworms. These predatory Scourge hosts are living weapons, released near occupied buildings where they then root out and eviscerate stubbornly dug in enemy troops.

Slayer Heavy Tanks are the bane of enemy commanders. With Evasive Countermeasures and an absurd 3 Damage Points, these tanks are very hard to shift. Add to that their complement of Razorworms, and they become a multi-purpose unit.

Armed with a choice of Twin Plasma Cannon or Acid Streamer, the Slayer can offer literally twice as much firepower as its little sister the Hunter, or with 8 Shots and the Flame special rule, it'll be able to deal with dug-in infantry with its Acid Streamer.

Contains 2 multi-part resin miniatures with parts to arm all with either Twin Plasma Cannons or Acid Streamers. Also contains 2 bases of 3 resin Razorworms (6 total).

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

The Stalker is a highly aggressive frontline tank hunter unit, designed to deliver crippling damage to the heaviest armoured units at close range using its frighteningly powerful electroweb caster. The Ravager is a flexible anti-air unit, usually employed by the Scourge when long term air defence is needed.

Stalker and Ravager Beetles can easily become the bread and butter of a Scourge army. As Standard and Support choices respectively, they can be extremely common, and for good reason! With Armour 15 and high movement, they're tough and fast, meaning you won't struggle to bring their short ranged weapons to bear. Both armed with Razor Claws that are able to tear apart armoured vehicles at close range, they're a thread to most units in game.

Stalkers are armed with Electroweb Casters which are deadly to most vehicles, even the most heavily armoured UCM tanks. Although their range is only 9", they do not suffer from Active Countermeasures, and their 2+ accuracy means you can bring a lot of Energy 12 shots to a target.

Ravagers instead have two Heavy Shard Cannons, which - for Scourge at least - are extremely long ranged anti-air weapons. Able to target two different units, a full squad of three can put out 12 shots against 6 different targets per turn!

Contains 3 resin miniatures with the choice of weapons to make 3 Stalkers or 3 Ravagers. These miniatures are highly detailed, approximately 29mm tall.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

The Kodiak armoured command vehicle is an extensively modified version of the Bear which foregoes transport capacity in favour of a battlefield command centre. This provides a mobile base from which a UCM commander and staff can direct frontline operations.

The Kodiak features a large communications dish and electronic warfare suite mounted on a dedicated trailer allowing the Kodiak to conduct high fidelity ground-orbit communications at a robust level of encryption. In the most desperate of situations, this gives the Kodiak the option to direct tactical directed energy orbital strikes.

A Panda is closer to the standard Bear APC in form, but uses an additional trailer derived from the same design as the Kodiak. Although less armoured, the Panda retains its transport space (albeit with a new door mechanism). Without the command suite the trailer instead houses an advanced scanning array. This marvel of design pings nearby dropzones, working in tandem with friendly infantry digital feeds to get a complete and accurate view of the nearby battlefield.

This scanning information is relayed back to local infantry, offering them increased knowledge of the surrounding area. Perfect for both hunting down important intel and for tracking enemies, the Panda is able to help UCM troops to achieve their objectives quickly and with minimum casualties.

Who doesn't love a Bear?

A Kodiak has long been the Command unit of choice for UCM commanders and for good reason! With its thicker armour and 4 Damage points, it can last quite a while under enemy fire! However, it should almost always be hidden away, since its Tactical Orbital Strike is an Indirect fire weapon! Calling down a barrage from orbit is just plain cool, and there's no way round that. It's also got infinite range, uses the blast template, and is Energy 13. What's not to like?

This kit can alternatively make the Panda. A transport for the UCM, this vehicle takes up more space in a dropship than a standard Bear, but oh gee does is come with a massive bonus! Its Scan Booster Unit gives nearby Infantry a longer range when using Scan tokens - already a good thing. However, it also allows them to trade Scan tokens (again from this longer range) for re-rolls to Damage. That's a big deal, and certainly worth the trade off of transport space in their Condor!

Contains 2 resin miniatures with the choice to make either as Kodiak ACVs or Panda APCs. These miniatures are highly detailed, approximately 86mm in length.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

The legions were designed for shock and awe, descending on the cradle worlds without warning and rapidly taking back what belongs to humanity. The Phoenix is an up-gunned beast. It is a heavy command platform which is always first into the fray with weapons blazing, issuing directives in real time to the troops. It was designed to come in with the first wave of planetary assaults where there is no existing ground presence and where a beachhead has to be established under enemy fire.

The Phoenix Command Gunship is probably the biggest Command vehicle you can take! Its massive frame allows for 9 Damage Points, which means this thing is sticking around. Able to Self-Repair if shot down, it can even get back up again after being destroyed! The Phoenix is armed with a whole suite of weapons, including two types of missile batteries (one Area and one AA) and two separate Minigun Triads. Although weaker on their own, with enough focus, they can even take out battle tanks.

Contains one multi-part aircraft. 10mm in scale with a length of 101mm.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

The Sabre is the primary main battle tank of the UCM, and forms the core of its armoured spearhead. It is a lightweight, low profile design which mounts a formidable UM-100 'Avenger' Railgun on a folding turret armature. This makes the vehicle eminently suitable for dropship operations, as well as highly flexible on the battlefield. The gun can be raised to a height of 9.8 feet (centre-bore), giving the Sabre the ability to fire over obstructions while keeping the hull in cover.

The Rapier utilises the Sabre-type hull to mount a fearsome UM-28 'Vindicator' Gatling cannon on a similar folding turret armature. This makes the Rapier an excellent anti-air unit, where the rapid traverse of its turret system can track fast moving aircraft with ease, while sending a hail of shells towards its target. The Rapier can also turn the Vindicator on massed infantry formations firing in 'wide burst' mode, causing unbelievable carnage.

Is there anything more Dropzone than UCM tanks? The sleek design with an armature weapon tells you everything you need to know about the UCM. The tanks are relatively light, with only a single crew member. The Colonials really know how to make the most of their fighting force! With Armour 15 these tanks are some of hardiest units in the game, perfect for UCM!

What can we say about Sabres that hasn't been said already? We'll just say it all again! Sabres are great. High armour, decent move, cheap points, and an awesome weapon. The Avenger Railgun is Energy 10, Articulated to fire from behind cover, and has great range and Accuracy. The Sabre is the bread and butter of the UCM army.

Even though they're Support options, Rapiers might even be more numerous than the humble Sabre! With a fantastic AA weapon in the Vindicator gatling cannon, you'll want a bunch of these in your army. Its 3 shots at Energy 7 will make most aircraft fly very carefully to avoid, and its Wide mode of fire can tear through infantry - even those hiding against edges of terrain!

Contains 3 resin miniatures with a choice to make 3 Sabres or 3 Rapiers. These miniatures are highly detailed, approximately 34mm in length.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

The Seraphim is a heavy fighter, designed specifically for strike missions against ground targets. It features a well armoured underbelly, giving it enhanced protection against ground fire. This is just as well, since a typical attack run involves a subsonic, low altitude pass, often directly over the frontlines.

The Seraphim fills the role of heavy strike fighter and bomber in the UCM; a job that it does very well! It comes equipped with Heavenfire missiles, either able to target the most hardened battle tanks or used as a Flame attack to hit enemies in Garrisons (and set them on fire to boot). You can also bring a Bunker Buster to battle, offering a massive Devastator-4 to scenery, meaning each time it targets a scenery piece it does 4 damage! Alternatively trade demolition for a Missile Cluster which is equally good at targeting enemy infantry and vehicles. With high energy and ignoring all cover, no one will be safe!

Contains 1 multi-part resin miniature with parts to arm with either a Missile Cluster or Bunker Buster.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

Recently, the Titania Aerospace Corporation has expanded aggressively, with designs on supplanting Ferrous Motor's pre-eminence, spearheaded by their Condor-AV program.

This brutal-looking variant manoeuvres similarly but has superior range, combat ceiling and avionics. Field trials have proved encouraging, fuelling speculation that the AASC may order as many as 50,000, their largest single procurement since the start of the Reconquest.

The Titania Condor flies out of the Colonies and onto the battlefield! This re-imagining of the classic Condor brings a bulkier design similar to the UCM's ground units. Able to be built as either a Condor or the heavier Eagle, the new design will fit right at home among your UCM forces.

The Condor is the UCM's premier dropship. With space to transport up to 2 Bear APCS or heavy tanks or 3 medium or light tanks, or even a single Kodiak, it really is a jack of all trades. With decent armour and manoeuvrability and a massive 3 Damage Points, you're going to want a lot of these in your army, and the Titania pattern design makes them look better than ever!

The Eagle Heavy Gunship replaces all transport capacity for some really big guns! Twin Heavy Railguns will make a mess out of pretty much any enemy vehicle, and the Multi Missile Pods add even more firepower to this heavy platform. With mobility to bring the weapons to bear, the Eagle is a great choice for UCM players that like their big guns flying around.

Contains 1 resin miniature with the choice to make a Condor or an Eagle. These miniatures are highly detailed, approximately 103mm in length.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

Following on from their wildly successful Condor bid, the Titania Aerospace Corporation has bagged production rights for a full half of the Big Dozen's military aircraft, and are even solely responsible for outfitting the Eden 1st - at least until Aurum decides otherwise.

Their latest aircraft is a new model of Falcon. An "easy win" for the engineers behind the ship, the Titania Falcon follows suit from the standard design, simply up-gunning a Raven chassis. The idea is no less formidable for ease of construction, which brings it in line with the UCM's ideals of an affordable and numerous military machine.

With a completely new kit, the Titania Falcon comes with all the firepower you love, in a brand new form with chunky panels and thrusters. Taking the design from the Titania Raven, this mobile gun platform is quick and dangerous!

With either Twin Gatling Cannons that can shred the toughest armour as if it were nothing more than flesh or Multi-missiles that will either pop light vehicles or aircraft with ease, there's plenty to recommend the Falcon, even before taking into account its Evasion +4!

This new kit comes in two pieces, with inbuilt Gatling Cannons that can be covered up with a deadly-looking Multi-missile pod.

Contains 2 resin miniatures with a choice of weapons. These miniatures are highly detailed, approximately 52mm in length.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

The Raven is one of the most ubiquitous dropships seen in battle. Its lightweight design and speed means it can be in and out of a dropzone before enemy inteceptors have even scrambled.

Such an iconic ship has been through redesign after redesign, with rival companies competing to have the best speed to cost ratio - something incredibly important when running the UCM war machine. The Titania Aerospace Corporation is the latest company to work on the design, prompting the AASC to place a substantial order.

With thicker armour plates that don't sacrifice speed, the Titania Raven is fast becoming the favourite among infantrymen. While it may not last much longer under direct fire, it offers passengers a far increased chance of survival, living to fight another day.

Seen first transporting the new Wolf LAC commander, the Titania Raven Dropship is now flying into land on its own. This new design makes big improvements over the first Raven, bringing it more into line with the rest of the range.

The new style Raven still comes in and A or B configuration, transporting infantry or light vehicles respectively. The new kit comes in only two pieces - the full Raven B and an additional part that houses infantry.

With high Movement and enough transport for small squads or vehicles, the Raven is one of the most popular transports in the UCM army.

Contains 2 resin miniatures with a choice to make 2 Raven As or 2 Raven Bs. These miniatures are highly detailed, approximately 52mm in length.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

While the Kodiak is an excellent support vehicle and the Phoenix is one of the heaviest command gunships ever built by mankind, the UCM found themselves lacking in rapid response battle line vehicles able to provide a command presence. That's where the Wolf LAV fit in with their battle plans.

Small and compact, the Wolf is a UCM design without a doubt, hiding blistering speed and manoeuvrability on its surprisingly sturdy frame. And up-sized Wolverine, it has earned a reputation among more gung-ho commanders for its Multi-Missile launcher, capable of dealing a lot of damage to enemy vehicles and aircraft, all the while providing a solid base from which to view the battle up close.

The Wolf LAV provides UCM players with a small and inexpensive unit to house their commanders. Perfect for smaller skirmish sized games, the Wolf offers a jack-of-all-trades approach to an HQ Battlegroup. With decent Armour, fast speed, and the choice of anti-vehicle or anti-air missiles, it provides a surprising bang for its buck! It is also a great choice for extending the Influence range of a more skilled commander, able to get in to the battle fast thanks to its Raven transport.

The Titania pattern Raven represents an advance of the UCM design, giving players the option of a sleeker aircraft that is more compact. The dropship functions identically to its sister in game terms, meaning you can mix and match to your heart's content. A brand new design, it's fitting that a commander should ride it to battle!

Contains one multi-part resin Wolf LAV and a single piece Titania Pattern Raven with clear acrylic flight stand. 10mm in scale with a length of 50mm.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

Type 2 battle walkers are considerably heavier than the Type 1, and are employed when only a sledgehammer will suffice. The Zeus Class is optimised for a defensive role with the experimental 'Aegis' energy shield, which - when coupled with the Type-2's heavy armour - gives excellent protection when leading from the front. The Zeus even has a communications array which makes it an ideal place for a lower commander to lead from.

A Type-2 walker has the typical heavy PHR armour - even thicker than usual walkers like the Ares - as well as 2 Damage Points. The Zeus is armed with a standard PHR Railgun and an energy shield, which increases its Passive Countermeasures save to a reliable 3+. With Command Centre the Zeus is a powerful way to get your commanders to the thick of the fighting.

Contains 2 resin miniatures.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

The M20 Zhukov is based on the M9 Hannibal hull and shares its renowned resilience as well as its weaknesses. However, the Zhukov takes the complexity and expense of the M9 to a whole new level. It was only available in limited numbers before the invasion and is ever rarer today. It is equipped with one of the first magnetic accelerator weapons ever mounted to a production tank, the 32mm Rail Cannon.

One of the more unusual variants of the M9 hull is the M22 Constantine. Trading outright firepower for a bulky active countermeasures system to protect nearby units, it has become an incredibly useful chassis for Resistance Commanders since most improvised vehicles have little protection of their own.

On the reliable M9 chassis, the Zhukov and Constantine have a fantastic survivability, with Armour 15, 2 Damage Points and Active Countermeasures, they're some of the best armour a Resistance commander has access too.

The Zhukov is an excellent Support choice, bringing the 32mm Rail Cannon, which is extremely good at targeting aircraft. With a 2+ to hit and Devastator-2 against both Aircraft and Vehicles, it makes it an extremely reliable damage dealer all round.

The Constantine has lower damage output (although still gets an Energy 9 shot from its hull-mounted 90mm Cannon), but its Countermeasures Projector gives Active Countermeasures to units close by, and Countermeasures Booster reduces the range of enemy weapons when targeting heavy armour. Very useful!

Contains 2 resin miniatures with the choice of weapons to make 2 Zhukov or 2 Constantine. These miniatures are highly detailed, approximately 47mm in length.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

The J19 Hellhog is a truly dangerous heavy strike jumpjet, designed primarily for a ground attack role. Although it can be equipped with air-to-air missiles, it has always had a lacklustre record in dogfights.

A Fast Aircraft that can hover? Sign me up! The Hellhog Jumpjet isn't the most survivable when travelling at slow speeds, but thanks to its Tilt-Jets it can choose between manoeuvrability and survivability. Armed with twin guns known as the Satan Chaingun it can easily pull apart light vehicles, and 2 Cobra Missiles mean it can go toe-to-toe with aircraft. It can even be upgraded with a Double Missile Pod if that wasn't quite enough firepower!

Contains 1 multi-part resin miniature.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

The AT-77 Lifthawk was the ubiquitous pre-war aerial transport - many are still flying with Resistance forces today. Its muscular VTOL design allows operation from secluded outposts. This workhorse is exceptionally rugged, with multiple redundant systems and a production cost that would be inexcusable to today's UCM military planners.

The Lifthawk Dropship can carry Jacksons or all sorts of tanks in the Resistance army. They can also be fielded as the Troopship variant which trades that capacity for a big bay full of infantry. Both Lifthawks come equipped with Missile Pods which have Penetrative making them even more deadly. The Barrel Bomber is a brutal addition to any army with it being equipped with Frag Barrel, Goliath Bomb and Missile Pods it is ready to rain havoc in any situation.

Contains 1 multi-part resin miniature with parts to make either a Lifthawk Dropship, Lifthawk Troopship or the Barrel Bomber.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

This box contains a perfect small Resistance army. With 2 anti-tank Hannibals, 6 AA Gun Wagons, and 12 bases of Resistance Fighters in 6 Jackson Half Tracks, you have a solid core for an army. The army is transported in 2 Kraken Hovercraft and 3 Lifthawks for aerial support.

The army is led by a Commander in a Hydra Relay Hovercraft. This small vehicle can traverse most terrain, allowing your Commander to get across the battlefield to where you need them. Armed with a missile launcher, it can hold its own, allowing you to get stuck into the fight.

The miniatures in this set have been designed for ease of assembly, so have fewer pieces than their equivalent in separate kits. The Hydra, Lifthawks, and Krakens are all unique to this set, with separate packs offering the classic miniatures in more pieces.

This set includes:

Resin Armour & Infantry: The Resistance army is made from fine detailed resin. These multi-part kits allow you to get a varied looking army, with each

vehicle as a slightly different build. The Lifthawks and Kraken Hovercraft are fantastic miniatures, able to transport a wide variety of Resistance units.

Resin Command: The Hydra Relay Hovercraft provides Resistance players with an inexpensive Command choice, cast in fine detailed resin. This miniature comes in one piece, able to drive onto the battlefield on its own, not needing to rely on another transport to get to the enemy.

Resistance Fastplay Cards & Template: Designed to get you playing straight away, these cards contain rules for all the units in this box. There is also a quick reference card for the full rules, making gameplay easier. There is also a Dropzone Commander Blast template for any Area effect weapons you might want to use.

This box contains a perfect small PHR army. With 8 Type-1 Walkers, 8 bases of Immortals all in Juno APCs, you have a solid core for an army. The Type-1 Walkers have several weapon options, able to be constructed as a mixture of Ares, Menchit or Phobos. All of these are brought to battle in 6 of the incredibly survivable Neptune Medium Dropships.

The army is led by a Commander in a Proteus Mobile Command Post. This platform is an Aircraft, meaning it offers unparalleled mobility for the PHR Commander. Complete with an electromagnetic warfare suite, it makes a powerful support unit.

This set includes:

Plastic Armour & Infantry: These multi-part hard plastic miniatures come on sprues for ease of construction. With easy-to-assemble pieces, you’ll have your army ready in no time at all. The sleek Neptune Medium Dropships are incredibly useful, able to transport many PHR units.

Resin Command: The Proteus Mobile Command Post provides PHR players with an inexpensive Command choice, cast in fine detailed resin. This miniature comes in three pieces, and as an Aircraft is its own transport! This unit can have a Commander inside, allowing it to dictate the flow of battle from the frontlines.

PHR Fastplay Cards & Template: Designed to get you playing straight away, these cards contain rules for all the units in this box. There is also a quick reference card for the full rules, making gameplay easier. There is also a Dropzone Commander Blast template for any Area effect weapons you might want to use.

Dropzone Commander is a game of mass battle combat in the far future. Speed is key in these warzones, with forces using dropships to quickly redeploy tanks, infantry, and colossal war machines.

Seizing ground and objectives wins games, but a fierce tactical acumen is needed to ct and react to your opponents' moves. Predicting the flow of battle and positioning all manner of advanced vehicles and creatures is key to victory, to make sure that the Dropzone is yours.

Written by David J Lewis and Lewis Clarke, this book contains everything you need to deploy your forces, including scenarios to play and help building your army for games to keep your opponents guessing, and complete (or stop) the Reconquest!

At 64 pages, this small format rulebook contains the 2.1 version of the Dropzone rules. With all speed and ferocity of the newest edition of the game, this book has updated rules and small tweaks to make your games faster and more enjoyable.

The book contains full rules for games of Dropzone Commander, including awesome shooting attacks, massive Behemoths, special rules, four scenarios, army composition, and a quick reference section. There is also a whole section of background information, offering your first glimpse into the Drop-verse.