Amongst the Patricians there are certain taboo's that are just a bit much to be entertained.

That said, there are those that take the excess too far. The Gourmand Noble is a large, imposing figure, clearly a fan of food, though even wild game from far off places couldn’t sake this noble’s hunger for flesh. Only the finest of cuts of fresh human will be enough to satisfy this noble.

The Cannibal Cultist is much less subtle and civilized with their taste for human flesh. They’ll happily carry around an entire leg, the perfect snack for later.

A Submissive Noble clings to the leg of his mistress, a particular kind of Cortigiane that whips those around her into shape. Two Cortigiane’s round out this box, these companions will follow their noble patrons into combat, deftly striking down foes with their Rapiers, assuming the coin is right.

Contains 5 resin miniatures and 5 plastic bases. Cobblestone bases pictured not included.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

The Nickar class hunter-killer is a small, atmospheric-capable vessel of sub-frigate tonnage. These nimble, fast ships are rightly feared by any enemy vessel that operates in atmosphere - this ship's favourite hunting ground. Armed with specialist plasma munitions, these deadly predators can easily destroy vessels larger than themselves such as strike carriers.

In the opening days of the Reconquest, this class was responsible for more Armoured Corps losses than ground actions. Thousands of men and vehicles were lost to hunter-killer incursions aboard their strike carriers before they even made it to the surface. Since these vessels operate in the relative safety of atmosphere, the best measure against them is corvettes - a lesson learned the hard way by the Admiralty who no longer discount such small ships in their battle plans.

CONTENTS: 6 single piece resin miniatures/blister. Wingspan: 52mm. NOTE: Provided with 6 multi-part Dropfleet flight stands, designed to track in-game status without the use of tokens. Miniatures supplied unassembled and unpainted.

This blister pack can be assembled as either a Beijing, New York or Tokyo class battleship. It is cast in exceptionally tough impact resistant resin and white metal and features extraordinary detail. 1:9150 (0.2mm) scale.

Length 142mm. 23 Resin and white metal Parts total (including optional ones).

NOTE: Provided with a multi-part Dropfleet flight stand, designed to track in-game status without the use of tokens. Miniatures supplied unassembled and unpainted.

Models supplied unassembled and unpainted

THE BEIJING CLASS BATTLESHIP

The Beijing class is an extremely resilient vessel which packs extensive firepower, namely nine UF-6400 mass drivers in three turrets, twelve UF-4200 mass drivers in four turrets and one Cobra laser, not to mention scores of missile bays and banks of point defence lasers. It is currently one of the most popular commands of the UCMF’s Admirals and for good reason – few ships the UCM has on active service are as effective in the annihilation of any enemy as the formidable Beijing. Most of the UCMF’s battleships are surrounded by tales of their illustrious deeds, their names etched into the collective consciousness of the colonial citizenry and this class has no shortage of legends.

THE NEW YORK CLASS BATTLESHIP

The New York class is one of the most in-demand ships in the UCMF since its flexibility and awesome power are almost unparalleled. A later development of the Beijing class, it replaces the former’s heavy turrets with a gigantic voidcraft hangar for launching scores of lethal fighters and bombers. It also replaces the Cobra laser with an enormous torpedo tube and internal storage for two of these devastating munitions.

THE TOKYO CLASS BATTLESHIP

The colossal Tokyo class battleship is one of the most specialised ships of this tonnage level in the UCMF. While based on the Beijing design, this class dispenses with its main mass driver battery in favour of three turreted UF/B-8000 bombard cannons, making this one of the most formidable orbital bombardment platforms anywhere in the Reconquest. Only the UCM has need of a battleship sized vessel designed for this purpose, such is the scale of the mighty undertaking.

"The Couronne Grand Carrier is a masterpiece of form entwined with function. Girders and domes more at home in Parisian architecture than on machines of war are accentuated by extravagant filigree to the fore. This grandeur is backed up by engineering that befits a war machine of her stature. The hull has been reinforced with lightweight yet durable alloys devised by metallurgists at Mont Saint-Michel. Wings of Malinois Strike Fighters are safely stored in her shapely belly, waiting to be unleashed against the enemy, with expert pilots having been trained in reconnaissance and the clearance of naval mines. Some of you may have even been fortunate to see La Dame Liberte. A glorious sight, she will be sure to inspire our sailors and strike dread in the hearts of those who oppose us. Again, her use is as important as her looks with a Solex generator being hidden under the folds of her robes. I can assure you that this addition will cement President Bonaparte as the eminent force in the Latin Alliance. Merci!" -Chief Logistical Officer Reynard Dupont, in an address to financial backers of the French
Please Note: Miniatures are supplied unpainted and some assembly will be required. Unit Cards are not included and can be found on the Dystopian Wars website.

Contents:

• 1x Couronne Grand Carrier (may also built as La Dame Liberte)
• 2x Chasseur (may also built as Furieux or Voliere Class)
• 2x Chevalier Cruiser (may also built as Charlemagne, Loire or Picardy Class)
• 2x Epaulard Artillery Submarine (may also built as Sirene Class)
• 4x Eceyere Frigate
• 2x SRS Token

The Shams Rahima skimmed across the coastal waters at full speed unworried about the sandbars that plagued this particular stretch. The Sobek class vessel was flanked by a pair of Kopesh Fast skimmers, ready to change formation at a moment's notice. This was supposed to be a routine patrol but the crews knew that the events of the last few months had been far from routine. Piracy was on the up, even if it had been performed mostly under the label of privateering. All the Great Powers had been attempting to violently increase their borders with even some countries under the same flag using the tempestuous time to expand at the cost of their neighbours. The peace of routine was becoming more and more like preparations for war. As a spotter called out something on the horizon, more than one crewman of the small fleet wished for less interesting times.
Please Note: Miniatures are supplied unpainted and some assembly will be required. Unit Cards are not included and can be found on the Dystopian Wars website.

Contents:

• 2x Mandjet Heavy Skimmer (may also be built as Sabah, Sobek or Mesektet Class)
• 2x Hashashin Destroyer Skimmer (may also be built as Kopesh Class)
• 2x Scarab SRS Token

The Imperium's focus on modular naval vessels is apparent in the Falkenstein Battlecarrier. By making use of the same integrated components and mechanisms of the Elector, Blucher and Konrad classes, the Falkenstein features many of the best traits of these vessels. With forward firepower surpassing a heavy cruiser, a complement of fighters in excess of a support carrier and the coimparable resilience to a flagship, the design is aun unqualified success. The Imperium’s Admiralty in the Königlich Preußische Marine are appreciative of the toolbox nature of such a vessel. They are especially liked by Commodores with more tactical battlefleets at hand, allowing them to cover more eventualities than could be done with either a battleship or carrier alone.
Please Note: Miniatures are supplied unpainted and some assembly will be required. Unit Cards are not included and can be found on the Dystopian Wars website.

Contents:

• 1x Falkenstein Battlecarrier
• 1x Volsung Class Cruiser
• 2x Sigimer Class Destroyers (May also be built as Toten Class)
• 1x Blucher Cruiser (May also be built as Augustus or Schaumburg Class)
• 2x Arminius Frigates

"Tighten the rigging, load up those barrels, we have a schedule to keep"

The Elven Docks provide a modular jetty section and port building, as well as medium sized Elven cargo craft. This set allows you to set up your elven dock differently each time for table top roleplaying or skirmish wargames.

This kit is made from 3mm MDF working well with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and not included.

"Though parts lie in ruins, this city block still serves some strategic importance."

These four kits easily provide enough scenery for a 3x3 this bundle is a great start for any smaller scale wargame. The Imperatore Disctrict is made from 3mm MDF and is designed for 8-10mm scale sci-fi wargames.

Model supplied unpainted and requires assembly. Some kits will need cutting and sanding for a perfect fit - always dry fit your models first for best results. We advise using PVA glue for assembling. Any miniatures are for scale only and not included. This kit contains:

• 2x SFX040 Leviathan District
• 1x SFX085 City Ruins
• 1x SFX041 Administratum Decimus

When you need to build some rooms but the dystopian scenery is difficult to clear, just build them up on stilts.

The Industrial Stilt Pods box set includes vast amount of buildings and connectors perfect for Industrial Hive games set in the far future. Built for gaming, each piece is designed to provide excellent vantage points while blocking line of sight - perfect for both competitive and narrative play.

This set contains 1 large stilt pod, 2 small stilt pods, 5 walkways, 3 large high platforms, 1 large low platform, 1 small high platform and 1 small low platform.

The Industrial Stilt Pods are made from 3mm MDF. It is a great scenery kit to use in sci-fi skirmish games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

You know you are rich when you own a fort which is able to withstand the largest of revolts.

The Mexican Paito Fuerte is a set fit for both narrative and competitive play. Designed for the Wild West range, it features plenty of line of sight blocking features such as raised roof lips and open windows. The kit is easily dismantlable allowing for easy storage.

The Mexican Paito Fuerte is made from 3mm MDF. It is a great scenery kit to use in Western themed skirmish game, as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Makes total sense to highlight exactly where the highrollers are coming and going from, doesnt make them a target at all..."

When the high rollers and the all-important types are flying in and out all day, it's wise have a fully functional lobby for their arrivals. This kit is fully functional with the rest of the M.U.L.E range and can be expanded to fill all ends of your game board. The M.U.L.E Helipad Lobby kit is made from 3mm MDF and 3MM Acrylic. It is a great scenery kit to use in sci-fi skirmish games and will work perfectly with 28-32mm games and miniatures. This Kit is supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and are not included.

This M.U.L.E kit contains:

• 1x Helipad
• 1x Tunnel
• 1x Core Module
• 1x HAB Module

The fabled squared circle has never looked so good as this! Whether you are a rookie or a Superstar, you'll find fame within this ring.

The RUMBLESLAM Rookie Ring is the perfect starting point for any serious Rumbleslam fan!

The ring itself is perfect regulation RUMBLESLAM size, with 100 squares in a grid for your wrestlers. Easy to build, you can get playing in no time. With removable turnbuckles you can put any neoprene RUMBLESLAM mat on top of the ring and then add the turnbuckles on top of that. Instant great looking ring!

The set also comes with three lengths of elastic nylon cord which make great ropes. Simply tie them together and slot them into the turnbuckles. The slots are open, which means you can take the rope off when packing it away too.

This kit is made from 3mm MDF.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures and neoprene mats are for scale only and not included.

Toshi: Dojo - Hone your skills in hand-to-hand combat and weaponry in class or combat. The dojo features a removable roof and sliding doors for full interior play. This striking kit will be an excellent feature point for any gameboard.

The Toshi: Dojo kit is made from 3mm MDF. It is a great scenery kit to use in Fantasy skirmish games, will work perfectly with 28-32mm games and miniatures, and looks great on an Eastern Inspired Traditional game board.

Model kit is supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results.

Any miniatures are for scale only and are not included.

"The temple of our purest thoughts is silence."

Toshi: Inorinotō Pagoda - A peaceful place for prayer and to give respect to the ancestors. A wonderful centrepiece to any game board. It features functional doorways and removable levels allowing for interior play. Whilst the shrine provides enough interior space for a miniature to tuck away for a quiet moment.

The Toshi: Inorinotō Pagoda kit is made from 3mm MDF. It is a great scenery kit to use in Fantasy skirmish games, will work perfectly with 28-32mm games and miniatures, and looks great on an Eastern Inspired Traditional game board.

Model kit is supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results.

Any miniatures are for scale only and are not included.

"Take a stroll through time."

Toshi: Old Town - A kit consisting of three individual Machiya Townhouses to build your own old town. Each Machiya features interior access with a removable roof and levels as well as functional doors and windows. Giving you a wide range of playability.

The Toshi: Old Town kit is made from 3mm MDF. It is a great scenery kit to use in Fantasy skirmish games, will work perfectly with 28-32mm games and miniatures, and looks great on an Eastern Inspired Traditional game board.

Model kit is supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results.

Any miniatures are for scale only and are not included.

"Sake, grain, cloth, you can find it all here"

Toshi: Old Town Street is based on Machiya's of old and gives a strong starting point to build your own old town district when combined with Toshi: Old Town set. Designed with interior play in mind, this kits features access for interior play and functional elements such as doors and sliding windows. This kit is a great start to building an Eastern Inspired game board based on Old Towns.

The Toshi: Old Town Street kit is made from 3mm MDF. It is a great scenery kit to use in Fantasy skirmish games, will work perfectly with 28-32mm games and miniatures, and looks great on an Eastern Inspired Traditional game board.

Model kit is supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results.

Any miniatures are for scale only and are not included.

"Are you brave enough to step foot into the dohyō? "

The Toshi: Sumo Stage is based on the sumo dohyō, a place soaked in history, tradition, and honour. Now is your chance to stage your own historic bouts.

The Toshi: Sumo Stage is made from 3mm MDF. It is a great scenery kit to use in Fantasy skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on an Eastern Inspired Traditional game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results.

Any miniatures are for scale only and not included.

"The only limitation is the mind - I ponder, as I stare into the calm waters below."

Toshi: Temple Accessories - the ideal kit to expand your temple grounds or create a luxurious garden. Combine it with kits in the Eastern Empires range to build your perfect game board.

The Toshi: Temple Accessories kit is made from 3mm MDF. It is a great scenery kit to use in Fantasy skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on an Eastern Inspired Traditional game board.

Model kit is supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results.

Any miniatures are for scale only and are not included.