These super fine tweezers with 1.75x Magnifier are ideal for picking, holding and viewing very small parts and components. Also useful for removing tiny splinters and threading needles.

Masking tape for model making, military modeling, plastic modeling and any miniature projects. No paint bleed or annoying paint lines. U.V. protected for masking in direct sunlight.

Double ended and lightweight pick and place tool to accurately position small components using the specially designed tacky silicone tips. Ideal for photo-etch parts, plastic and resin model components and decals. Handle delicate components without fear of damage, the impregnated silicone tips allow gentle lifting without harm.

This pick up tool is specially designed with impregnated silicone tip with the required tackiness for accurately picking up and placing of small components. For plastic model components, decals and other small components.

Easy to control trigger that clamps to the top of spray cans for precise spray coverage and pressure control without the mess and easing finger strain. Universal fits for all standard spray cans.

Close the blast doors!! Soldiers, form up. This is our last line of defence.

The Bunker kit makes for a great objective building on your sci-fi table top. It comes with a fully playable roof section that is removable to allow access to the interior.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Pipettes for mixing colors. The packaging contains 8 units of 3 ml/0.10 fl oz each.

Sandstorm Hovel B is a perfect small kit to fill out the housing buildings on your sci-fi town boards. Although it has a smaller footprint than the other sandstorm kits, hovel B is taller to provide more verticality for your models.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

This pack inlcudes the magnets you need to magnetize your Warmachine MkIV Starter box.

The barracks has the capacity to house a hundred men, including weapons and equipment, fighting fit and ready to respond to any local danger.

The Barracks is a large set great for a centrepiece to build a sci-fi base around. The kit includes a removable roof and sliding doors to allow interior playability, as well as ledges and a shallow sloped roof if your units want to capitalise on the high ground!

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Get a sniper team up on those gantries, I want eyes on the enemy! A squad and B squad will circle around and catch them by surprise. Units! Move out!

The Gantries provide a raised firing platform with fortified barriers, giving heavy cover to your advanced units. Containing multiple modular pieces, it can be set up in many ways each time you play, a perfect addition to any sci-fi base layout.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

This is Gold leader... requesting permission to land... Gold two has been clipped... engine failing... clear the deck we are coming in hot...

The Landing Platform is great kit if you need to provide a bit of height to your sci-fi gaming board. A perfect obstacle for any vehicles, setting up the chance of a spectacular crash in game. The base of each tower incorporates a door design if you want to house-rule the ability to use the inbuilt elevator to gain access to the high platform.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Most conflicts are fought and won over battlefield objectives. This battle is no different.

The Objectives set provides you with almost every item needed for an objective based game in your battles in a galaxy far, far away. The kit contains:

• 1 Crashed Pod
• 6 Landmines
• 2 Mine Carts
• 4 Water Gatherers
• 3 Consoles
• 5 Crates
• 6 Supply kits

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Some still say you can hear the fires burn and the hammer swing"

The Farrier's Homestead, a once lively and busy place, known as the one stop shop for those shiny shoes for your favourite horse. Now only shadow of its former self, it is perfect for skirmishes! Keep it close or spread out across your Savage Domain board to create lots of cover and ambush zones. One thing is for sure, it's certainly going to be lively again at the Farrier's homestead.

The Farrier's Homestead is made from 3mm MDF and 1mm greyboard. It is a great scenery kit to use in Fantasy skirmish games, and will work perfectly with 28-35mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and not included.

The residents of Pitchstone have everything they could possibly need; A store to buy traps and a Doctor's office to help you when it goes wrong.

The Pitchstone Quinn Street contains 1 doctor's office, 1 store, 3 large boardwalks, 1 medium boardwalk, 2 small boardwalks, 1 sign, 1 set of crates. The Pitchstone Quinn Street is suitable for competitive and narrative play by providing both line of sight blocking as well as high vantage points, it also has removeable floors allowing for interior play. Whilst providing these competitive features the Pitchstone Quinn Street is ideal for new and experienced hobbyists alike. 

The Pitchstone Quinn Street is made from 3mm MDF. It is a great scenery kit to use in sci-fi skirmish games and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Derricks are dotted about everywhere in Promethean Complexes. Used for moving heavy loads where it might be required and a construct wouldn't be practical, they are also converted to pump jacks on occasion. These ubiquitous sights with their hypnotic, repetitive movements are symbolic of the barely human constructs that seem to act the same, all for the benefit of the Covenant of the Enlightened and their goal of global control.

This set contains:

• 1x Promethean Derrick

• Scenery items are manufactured in Medium Density Fibre Board (MDF).
• Buildings are supplied primed and some assembly will be required.
• Assembly instructions can be found online and by scanning the QR printed on the packaging.

The forges of a Promethean Complex burn night and day to smelt all sorts of raw materials for use in their engineering breakthroughs. It would be impossible to acquire the vast quantities of iron and other metals from outside so ore is brought in from all over the Union and beyond to keep the fires of industry burning. This has the benefit of making it much more difficult for external governments to keep track of all the wonderful and terrible advances made by the Covenant of the Enlightened.

This set contains:

• 1x Promethean Forge

• Scenery items are manufactured in Medium Density Fibre Board (MDF).
• Buildings are supplied primed and some assembly will be required.
• Assembly instructions can be found online and by scanning the QR printed on the packaging.