Built in various configurations over the years, the Sagittarii is a typical pre-war cutter, if ‘typical’ can even be applied to such a specialist ship. Almost all the ship’s power is consumed by the drives, necessitating the low power N-12 Artillery Cannon. Instead, add a set of launch bays and you have the Baleares, one of the fastest carriers in mankind’s fleets, embodying the concept of the pre-war pocket carrier.

This set contains 3 Resistance Cutters, all able to be built as either Sagittarii or Balaeres variants. There are parts to build 3 ships, of either variant, and with additional rudder pieces, you can assemble them in a variety of ways; both engines and nose can be put vertically or horizontally for more customisation.

The Sagittarii fills the classic Cutter role: annoying the enemy at high speed! The fastest ship in a Resistance fleet, it can bring its N-12 Artillery Cannons to bear frighteningly early, and often without too much support, leaving that for the rest of your ships. Although not very accurate, a squad of three can wreck even a medium Cruiser with one barrage and a bit of luck. Meanwhile the Baleares is a Pocket Carrier, providing Fighter & Bomber support for the rest of your fleet. With the same blistering speed, it can assist ships at a moment's notice - ideal for Resistance who typically have low Point Defence.

Contains 3 resin miniatures and plastic Dropfleet Commander bases and flight stands.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Other ships and gaming mats are for scale purposes only.

These mighty vessels once boldly plied new space, often commanding smaller exploration fleets on random jump expeditions. Unlike most ships, whole sections of superstructure can be swapped out for specialist modules, including weapons, storage, hangars, refineries, factories, cores and even vast bio-domes to seed empty planets with Earth’s fauna and flora.

This set contains a Resistance Dreadnought, able to be built as either a Pathfinder, Explorer, or Coloniser class, depending on your need! The Pathfinder is the smallest of the three, and you should be able to build 2 in one box. The Explorer is in the middle, and the Coloniser is the largest Dreadnought we've ever made!

With 68 pieces in this set (not including 2 Dropfleet bases and a bunch of MDF spacers to help with construction), you're able to build your Dreadnought your way. This is by far the most modular space ship kit we've ever made, and probably the modular space ship kit in the world.

There are almost infinite ways to build your Dreadnought, with rules that encourage freedom of choice. You can have a nicely balanced ship with a mixture of launch assets and weapons, or half a dozen torpedoes. You can take all broadsides or loads of turrets - the choice is yours!

Note that due to the size and modularity of this kit it is only recommended for advanced modellers. Some parts will need heating and bending to fit perfectly straight and slight gaps might need filling. And - let's face it - there are so many parts, there's going to be a fair bit of planning and trial and error involved!

Contains 1-2 resin miniatures and 2 plastic Dropfleet Commander bases and flight stands.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Other ships and gaming mats are for scale purposes only.

The Armstrong, Aldrin and Collins are some of the earliest human starships still in service; dating back to the late 24th century, they were designed for endurance exploration. Every UCM Colony was discovered by hit and miss expeditions, requiring many semi-random foldpace jumps until a usable world could be found, explored and given a node. Such dependable hardiness ensured three centuries’ service. In size and capability they equal a modern destroyer, though in displacement they are more akin to cruisers due to multiple redundancies, cavernous storage and antique tech.

This set contains 3 Resistance Destroyers, all able to be built as either Armstrongs, Aldrins, or Collins! There are parts to build 3 of each, and also 9 bridges, allowing loads of variation on your ships.

With a chunky design the out-bulks most other ships of their class, you can tell that these are Resistance ships! The Armstrong is armed with a deadly HF-6 Clearance Laser which - while useful in the long task of asteroid clearance, is put to much better use against enemy ships, offering Resistance an option for Burnthrough! The Aldrin design is the "standard" colony ship in the old EAA, and while it doesn't have much offensive capability, it is able to drop Bulk Landers from Atmosphere. Finally the Collins uses its extensive refuel and repair bays to keep friendly fighters in the air for longer - a useful tactic indeed for Resistance's Point Defence!

Contains 3 resin miniatures and plastic Dropfleet Commander bases and flight stands.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Other ships and gaming mats are for scale purposes only.

Although the Resistance does operate corvettes, very few survived the Scourge invasion. Being designed to operate from atmosphere, they were the very furthest ships from any jump point and had to face the first waves of Scourge corvettes and Strike Carriers. Those that did escape were generally forced to withdraw early on due to combat damage.

However, such small ships require modest orbital slips to construct. As a result of the obvious need to protect their Strike Carriers, many Resistance fleets with the resources have attempted to build new ones, with mixed success. Certainly, the Vega Scrapfleet has proved capable, and of course Kalium builds these hunter-killers in large quantities. The Munifex is a fairly typical corvette – fast, atmospheric-capable and designed to kill Strike Carriers, as well as their opposite numbers. It is armed with specialist missiles, much like the UCM’s Santiago class.

This set contains 6 Resistance Corvettes. These diminutive ships are some of the smallest available to Resistance commanders. Armed with NCA-1 Missiles, these Close Action weapons are excellent at fighting in atmosphere, and get more powerful the more you shoot, thanks to the Squadron-3 special rule.

Contains 6 resin miniatures with plastic Dropfleet Commander bases and flight stands.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

The Centurion was the most common standardised vessel of cruiser tonnage in the pre-war EAA Terran Grand Fleet, where as the Gladiator was a limited production test-bed for Vent Cannon technology. In those days the definition of Cruiser was somewhat broader; today, such a bulky vessel is designated as a Grand Cruiser, a classification not really in use with the UCMF. In bulk (though not in firepower), these ships are more akin to a modern Heavy Cruiser. The two have truly excellent ceramic armour plating that outclasses all but defence monitors in the modern UCMF.

The Centurion's simple but effective all-gun primary armament provides an excellent blend of destructive power and reliability. Its broadsides of transition mass drivers, alongside an oversized twin pure mass driver turret require low weapon maintenance - a welcome factor for the Resistance.

The Gladiator on the other hand trades the mass drivers for Heavy Vent Cannons: dangerous weapons that the UCM long gave up on due to the number of accidents and dangerous internal

meltdowns caused. The Resistance has been able to overlook these flaws, as Vent Cannons are especially devastating. Such power is particularly attractive to Kalium – the rogue Colony has produced fully three times the number of this class than were laid-down before the Scourge invasion.

This set contains 1 Resistance Grand Cruiser, able to be built as either a Centurion or a Gladiator. This brand new Earth-pattern ship supersedes the older Exclusive miniature we produced, moving its turret to the top, and adding a new front keel reminiscent of the rest of the Resistance range.

With extremely heavy armour and devastating weaponry, these ships bring a lot to your games, and will quickly become a priority target for your opponents! The Centurion class is more reliable in its damage output (and doesn't hurt itself!), but the Gladiator will surely find a home due to its outrageously destructive Heavy Vent Cannons.

Contains 1 resin miniature with parts to assemble two variants, and a plastic Dropfleet Commander base and flight stand.

Resin miniature supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

Sharing many superstructure elements with the smaller Centurion Grand Cruiser, the Phalanx was one of the largest standardised classes produced by Trident Industrial, though today it’s only built in Kalium’s yards. Pre-war Battlecruisers differ from modern types in that they are slower and offer less firepower in manoeuvre, but far superior toughness. Indeed, it’s best to think of them as pocket-battleships rather than specialist, aggressive ships.

The Phalanx is armed with long broadsides of transition mass drivers and four Titanmetall 9K mass drivers in two traversable turrets. In combination, the class can unleash withering fire against multiple targets, given the right positioning.

The Tribune's firepower comes from two conventional artillery cannon turrets and an increased close action capability, as well as a single mass driver turret. However - unusually for a full combat ship of this size - it features capacity for bulk landers and a flight deck, making it a fleet carrier as well. In combination, the Tribune is a jack of all trades, able to adapt to fluid combat situations better than most ships.

This set contains 1 Resistance Battlecruiser, able to be built as either a Phalanx or Tribune. With armour heavy enough to make a Battleship blush and loads of Hull Points, these Battlecruisers will stick around to the end of the battle.

The Phalanx has the role of a traditional Battlecruiser, with loads of firepower from its Mass Drivers and Hybrid Gun Batteries. Anything you point this at will definitely feel the pain. The Tribune however has a much more varied loadout, able to be used in offensive or defensive roles with Bulk Landers & Fire Ships, Fighters & Bombers, Missile Banks, Low Power Artillery Cannon Turrets and even a Mass Driver Turret. It can do it all!

Contains 1 resin miniature with parts to assemble two variants, and a plastic Dropfleet Commander base and flight stand.

Resin miniature supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

Though lacking in military resources, most fleets scattered by the Scourge invasion had a high proportion of merchantmen - rightly more likely to run than engage. Forced to be inventive, ragtag Resistance groups sought to repurpose civilian vessels to military ends. Haulers often make poor gun platforms but offer capacious internal holds. When combined with ‘repurposed’ shuttles, yachts and small transports, a formidable weapon can result: the Detonator, a hive of remote-operated, explosive-packed fire ships. The most common vessel is a Seneca class - unweildy and utilitarian, it offered pre-war traders the largest storage for the lowest cost, although many other patterns are in service in this unlikely role.

Crewing a repurposed flimsy brick fizzing with improvised time bombs is not for the sane and/or skittish. These individuals are treated with wary respect when on shore leave, notable in the bar due to singed hair - if they’ve survived to douse their burns in booze. In the service of Kalium, Detonators are employed in an altogether more sinister, regimented fashion, which says a lot of how much the Kabal values flesh and blood.

This set contains 6 Resistance Seneca Detonators. Its chunky design shows an indomitable design ethos - this thing isn't going to be interrupted!

Cast in a single piece, the model has fine detail and the angular armour plates for which the Resistance are well known. A Seneca Detonator has traded its cargo storage for explosives, able to send out loads of Fire Ships to enemy vessels. Of course a ship so full of bombs isn't going to go down quietly - it'll explode on death, causing a much bigger blast than other ships its size!

Contains 6 resin miniatures and plastic Dropfleet Commander bases and flight stands.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Other ships and gaming mats are for scale purposes only.

This set contains 1 Resistance Battlecruiser, able to be built as either a Senator or Triumvir class.

Sleek yet clunky, these Battlecruisers exemplify the Resistance's theme of "bloated military budget gone wild". Covered with thick armour and an array of exotic structures and weapons, the Resistance style shines through.

Armed with loads of missiles, a scanner, and some big bombs, the Senator does a bit of everything. Its Close Action weaponry is extremely potent, which is a threat to anyone getting close. Thanks to its scanners it has Detector, so you can actually keep back to provide support. The VX Bombs are the thing to write home about though. While they don't do a colossal amount of damage to Sectors, their nerve agent will kill all life in the surrounding area - whether they're friendly or enemy! On the other end of the spectrum entirely, the Triumvir is all about defence. It is able to help repair any ships close by, aiding their Damage Control rolls. It's also able to pull apart scrap from friendly destroyed ships, using it to repair Hull damage from other friendlies that are close by. Very handy!

Contains 1 resin miniature and plastic Dropfleet Commander bases and flight stands.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Other ships and gaming mats are for scale purposes only.

The Resistance - the grown-up version of yelling "just leave me alone!" at the top of your lungs. With guns. Big guns.

These dice have been cobbled together out of anything we could find lying around, and stuck together with bits of gum we found under our desks. All the more fitting for Resistance players!

Just kidding! They're high quality plastic, made in Resistance blue with an opalescent finish, these dice have the Resistance logo etched on the "6" facing to remind you what you're fighting for (freedom).

This pack contains 10 six-sided dice, perfect for games of Dropzone Commander and Dropfleet Commander.