This blister pack can be assembled as either a Diamond class battleship or Platinum class supercarrier. It features awesome interior detail of the flight deck, visible from the outside if assembled as the Platinum class. It is cast in exceptionally tough impact resistant resin and features extraordinary detail. 1:9150 (0.2mm) scale.

Length 169mm. 11 Resin Parts total (including optional ones).

NOTE: Provided with a multi-part Dropfleet flight stand, designed to track in-game status without the use of tokens. Miniatures supplied unassembled and unpainted.

THE DIAMOND CLASS BATTLESHIP

The Diamond Class battleship is a truly frightening spectacle. Stretching 1546 meters in length, this mighty vessel is one of the largest known battleships and an imposing figurehead for any fleet. Despite their rarity, more UCMF officers ranking Admiral or above have met their deaths at the hands of one of these leviathans than any other type of ship in the Reconquest. In addition to a pair of disintegrator banks, the Diamond’s primary armament is a triad of super particle lances. These vast weapons extend through half the ship’s entire length and are fixed in the forward arc, such is their unknowable mass. These monstrosities have the ability to scythe through any armour like butter, their beams frequently passing right through a capital ship. While their damage dealing ability is potent, their real strength lies in reliability – the certainty that the enemy will feel the Diamond’s wrath, no matter how well protected it is.

THE PLATINUM CLASS SUPERCARRIER

The Platinum Class shares the same basic hull design as the Diamond class, but its internal space and vast upper levels are dominated by an enormous flight deck, making this vessel a supercarrier by UCM reckoning. The Platinum class can unleash swarms of fighters and bombers in an unstoppable tide of destruction, in volumes and quality that few other ships can match. In addition (and like its cousin the Diamond) it also serves the secondary function of mothership, carrying a small number of ground troops to supplement surface landings. Their continued survival over the millennia is due in part to their scale, but mostly to the extended combat range granted by its strike craft, ensuring that finally ending one of these behemoths is a challenging task in the extreme.

During recent engagements, UCM observers have reported the presence of a new Scourge heavy tank chassis with two distinct variants. Thankfully, these tanks forgo the familiar Slayer-type hull’s transport capacity, but this allows the mounting of larger weapons. Whether these are newly developed is unconfirmed, although AHQ has cited this as an example of the enemy’s capacity for innovation and rapid deployment of new assets while under the strain of invasion—a troubling prospect.

The Executioner mounts a slightly smaller version of the loathsome Bio-Mortar, a weapon previously only encountered aboard the massive Eradicator Chamelopod. This allows the Executioner to liquify the internal organs and flesh of emplaced enemy infantry from a distant, concealed position. Although it’s only been reported in combat for a short time, the Executioner is already a dreaded foe and has led to mass-desertions. Priority should be given to destroying Executioners before freedom of troop placement is entirely lost.

The Decapitator is especially unusual. Initially, observers thought this tank to be unarmed, if amazingly fast compared to other large skimmers. However, once the Decapitators closed to point-blank-range of their target, their central engine mount rolled 180 degrees to face forward. Although all speed was lost, that engine’s thrust could then be channelled into a laser-thin beam capable of slicing through virtually anything. Other heavy units, even the largest behemoths, are highly vulnerable to this new threat.

Contains 2 multi-part resin miniatures with parts to assemble as either the Executioner Heavy Tank or the Decapitator Heavy Tank.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

Sakura Densya is a Book Nook Book End is a DIY bookshelf decoration in form of a miniature house. After you finish building this book end, it will show you an amazing scene of Tokyo streets in Spring and will definitely make you and your guests impressed. With the LED lights on, your bookshelf will look even more amazing!

Rolife Book Nook and Wonderland TGB01 Sakura Densya / Tram. DIY. Age 14+. 340 pieces. LED. Not for children under 3 years.

Models supplied unassembled and unpainted. Requires super glue. We recommend washing resin models in warm, soapy water before painting. CONTENTS:

• 1x Resin Ota Sora
• 1x Hard Plastic 25mm Round Base

Models supplied unassembled and unpainted. Requires super glue. We recommend washing resin models in warm, soapy water before painting. CONTENTS:

• 1 x Hard Plastic Chira
• 1 x Resin Narsa Upgrade
• 1 x MDF 100mm Round Base

Models supplied unassembled and unpainted. Requires super glue. We recommend washing resin models in warm, soapy water before painting. CONTENTS:

• 1 x Hard Plastic Sturnhammer
• 1 x Resin Karfi Upgrade Kit

Models supplied unassembled and unpainted. Requires super glue. We recommend washing resin models in warm, soapy water before painting. CONTENTS:

• 1x Resin Marauder Commando Captain
• 1x Hard Plastic 25mm Round Base

Models supplied unassembled and unpainted. Requires super glue. We recommend washing resin models in warm, soapy water before painting. CONTENTS:

• 6x Resin Marauder Mawbeasts
• 6x Hard Plastic 25mm Round Bases

Models supplied unassembled and unpainted. Requires super glue. We recommend washing resin models in warm, soapy water before painting. CONTENTS:

• 1x Resin Plague General
• 1x Hard Plastic 25mm Round Base

Models supplied unassembled and unpainted. Requires super glue. We recommend washing resin models in warm, soapy water before painting. CONTENTS:

• 1 x Hard Plastic Veer-Myn Tunneller
• 1 x Resin Tangle Upgrade Kit

Models supplied unassembled and unpainted. Requires super glue. CONTENTS:

• 20 Hard Plastic Orc Ax with Command
• 20 Hard Plastic Orc Greatax
• 6 Plastic Trolls
• 3 Hard Plastic Orcling Swarms
• 1 Metal Orc Krudger
• Plastic and MDF Square Bases

Models supplied unassembled and unpainted. Requires super glue. CONTENTS:

• 1 Orc Command Sprue
• 6 Orc Ax Sprues
• 1 Orc Greatax Sprues
• 25mm Plastic Square Bases

Models supplied unassembled and unpainted. Requires super glue. CONTENTS:

• 1 metal miniature with alternate components

Models supplied unassembled and unpainted. Requires super glue. CONTENTS:

• 10 x Gore Riders with Command
• 10 x Cavalry Bases

Models supplied unassembled and unpainted. Requires super glue. CONTENTS:

• 20 plastic Orc Greatax
• 1 Plastic Orc Command Sprue
• 25mm bases

Models supplied unassembled and unpainted. Requires super glue. CONTENTS:

• 1 x Metal Orc Warlord
• 1 x 25mm Base

Models supplied unassembled and unpainted. Requires super glue. CONTENTS:

• Multi-part Metal Krudger on Gore
• Cavalry Base

Models supplied unassembled and unpainted. Requires super glue. CONTENTS:

• Multi-part Resin Krudger on Winged Slasher (12cm long and 7cm tall to top of Rider)
• 100mm x 50mm Chariot Base