Since mankind’s first contact with the Shaltari, the Gaia has been the alien’s closest equivalent to a heavy dropship, enabling bulk teleportation of large ground units. However, the Gaia’s lack of conventional armament has always restricted its use to pre-cleared dropsites. Around a year into the

Earth campaign, a new variant has appeared. Designated ‘Adamah’.

This formidable aircraft trades some transport capacity for a pair of front-mounted gravity cannons. These amplify the force of gravity to crush tanks like empty drinks cans, pulping their crews in the process. With formidable anti-armour weaponry, the Adamah can support its own landings, making it a singular threat that can operate far from support.

Although large, these have been observed operating alone in a vanguard/probing role, as well as in small-scale, surgical strikes. Commanders on the ground are learning to fear single-blip Shaltari contacts, as one Adamah can sweep a landing zone clear of picket units, then teleport in endless waves of lethal warstriders, gravtanks and support vehicles.

Contains 1 multi-part resin miniature with parts to assemble one Adamah Gungate.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

"It was supposed to be a pentagon, but corners were cut"

The Octo Pod Consortium is a fantastic set for any Sci-Fi tabletop, it is fully modular with the rest of the Octopod kits allowing for the pods to be extended to infinite heights alongside this the Consortium can be set up as a Sci-Fi outpost which can be stacked high or expanded out.
The Octo-pod Consortium kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

This Kit is supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and are not included. The Consortium Features:

• 4 Octopods
• 1 Octopod stairway
• 1 Octopod Square base
• 2 Walkways
• 1 Ladder
• 5 barricades
• 2 Drums
  

"I was just thinking 'how do I get up there?' Now I know."

The Slab Hab Access and Walkways kit is the kit you need for your towering constructions or sprawling buildings in SLAB City. Giving you different access points and alternative walkways, this kit provides multiple layout variations within the SLAB range.

The SLAB Hab range is a super flexible range that can quickly fill up your game table! Stackable and joinable with the walkways and access point kit, you can build towering slums or a sprawling city. The range is quick to build so you can have tournaments and games running in no time.

The SLAB Hab Small kit is made from 3mm MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"So much room for activities"

The large SLAB Hab, is a show of force. Whilst you may want to show your entire army off on the spacious roof, it's not recommended. Featuring secure walkways, stairways, and rooftop barricades. The large Hab is a spacious building, capable of holding a large army and is a great building block for stacking other Hab Buildings onto it.

The SLAB Hab range is a super flexible range that can quickly fill up your game table! Stackable and joinable with the walkways and access point kit, you can build towering slums or a sprawling city. The range is quick to build so you can have tournaments and games running in no time.

The SLAB Hab Small kit is made from 3mm MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"Time to hunker down and stand our ground"

The medium SLAB Hab is a great stronghold for a dwindling force. Featuring secure walkways, stairways, and rooftop barricades. The medium Hab is the home away from home when you're on the run. 

The SLAB Hab range is a super flexible range that can quickly fill up your game table!  Stackable and joinable with the walkways and access point kit, you can build towering slums or a sprawling city. The range is quick to build so you can have tournaments and games running in no time. 

The SLAB Hab Small kit is made from 3mm MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"In today's economy, this is practically a mansion"

The small SLAB Hab is the ideal extension to your existing buildings within the SLAB Range. Featuring secure walkways, stairways, and rooftop barricades. It's like a small mini fortress. 

The SLAB Hab range is a super flexible range that can quickly fill up your game table!  Stackable and joinable with the walkways and access point kit, you can build towering slums or a sprawling city. The range is quick to build so you can have tournaments and games running in no time. 

The SLAB Hab Small kit is made from 3mm MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"Was that gunfire the start of the match?"

The Tenement Quarter is an excellent way of bulking out the scenery on your board. Full of brilliant buildings to block the line of sight and occupy.  Take control of the Financiers building, one of the other main buildings or even catch a game at the small sports field. It's a great set of scenery for your games and is able to be spread out or compact, depending on your game.

The Tenement Quarter kit is made from 3mm MDF. It is a great scenery kit to use in sci-fi skirmish games, and will work perfectly with 10mm games and miniatures

This Kit is supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and are not included.

Brock Spectre's curse of unlife comes from the giant knife embedded in his sternum, which is also cursed with unlife. Due to the curse he's unable to posess armour to fight alongside the Knights of the Squared Circle. As most of the vows had the "till death" clause, he's no longer able to use the title he had in life, Sir Brock of the Excessive Bench Press.

A weight 3 ghost, something you don't see everyday. Brock Spectre is a Superstar between life and death, but even in that limbo he is a mighty wrestler non the less. A respectable statline that focuses on quantity over quality, with 3 out of the 4 stats rocking 3 dice with a rainbow of colours. 

The Soulspear rope attack has jump and fury, this means Brock chooses who's gonna be struck, he then follows it up with a bloody fisted Brawl attack. Brock comes with not one but two Grapple abilities, the first is the Guillotine Choke, a base damage of 2 and Bleeding means the damage will linger on. The Ghost Suplex is his second Grapple ability, this move gives the enemy wrestler -AP and Brock swaps position with the target wrestler.

Spectral means that Brock cannot be pinned however he cannot pin enemy wrestlers, not much physical touch through being a ghost. Brock's Crowd Please is questionable in the rules of wrestling as he makes use of the knife in his chest, in a Spectre Knife Fight. This removes a gold Stamina to one enemy wrestler.

Contains 1 resin multi-part miniature with square acrylic base.

Resin miniature supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Note that clear acrylic bases have a peelable protective film. Miniatures supplied with square bases.

Hollow Gourdo always has a glowing presence about him, it may be the bright burning spectre engulfing the undead bones of this headless knight, feared among all when that green glow fills the ring...or he's just recently had a great match, always hard to tell.

This Headless wrestler comes in at a cheap price of 200k, making him one of the cheapest superstars in the game. This lower price can be seen in the wrestlers statline, but don't let that fool you. Lantern Lariat is a solid Rope ability with a gold and silver as well as 2 Damage, but the real strength comes from the Knockdown which can threaten any wrestler that is struck by it. The Vertebreaker is Gourdo's Grapple ability that gives out -AP to enemy wrestlers.

Hollow Gourdo's strengths comes from his active and choice abilities. Flames of the Dead has two options, Blight means nearby enemy wrestlers can only activate crowd pleasers on a Blank result, making even crowd favourites hugely unpopular. Alternatively, he can use Might, this gives Undead to friendly wrestlers, raising KO'd wrestlers from the canvas. This ghostly Heel's Crowd Pleaser, Spectrestep, allows this wrestler to be placed anywhere in the ring, landing a Surprise Turnbuckle attack on some unfortunate soul.

Contains 1 resin multi-part miniature with square acrylic base.

Resin miniature supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Note that clear acrylic bases have a peelable protective film. Miniatures supplied with square bases.

The King of Hearts is so valiant and noble, she even managed to win her way into the Queen of Hearts' Heart. That's no easy task when the Queen is an ancient vampire. 

This King and Queen Tag team would be impressive as individuals, both boast incredible statlines with not a Copper in sight and enough pluses that can almost guarantee they will out wrestle even the largest of superstars. 

King of Hearts, only has a movement of 1, however, each time she performs an attack or Crowd Pleaser she regains that move. Furthermore, MP counters have no effect on the Kings movement. The Ballista Clothesline is a Rope ability, that has Knockdown, this allows the King to put a wrestler in the prime position to go for the pin. Armoured Leg Drop is an excellent turnbuckle that has a great Range and Damage. 

Queen of Hearts, like her tag partner, only has a movement of 1. However, unlike the King, she moves across the entire ring in one direction only stopping when someone has the audacity of getting in her way. The Queen uses her Grapple ability, the Exsanguinate, to not only deal damage to enemy wrestlers but also give them -AP and more importantly a Bleeding counter. The Queen can then use this with her Blood Siphon to recover stamina throughout the game. The Flying Neckbreaker is a solid Turnbuckle ability that lays the smackdown with 2 Gold and gives the target wrestler -MP. 

This royal partnership comes together with the Crowd Pleaser favourite...The Keep. 2 gold and 2 Damage means consistent output to enemy wrestlers, but Crowd Please allows these characters to reach their full potential.

Contains 2 resin multi-part miniatures with 2 square acrylic bases.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Note that clear acrylic bases have a peelable protective film. Miniatures supplied with square bases.

Brock Spectre's curse of unlife comes from the giant knife embedded in his sternum, which is also cursed with unlife. Due to the curse he's unable to posess armour to fight alongside the Knights of the Squared Circle. As most of the vows had the "till death" clause, he's no longer able to use the title he had in life, Sir Brock of the Excessive Bench Press.

A weight 3 ghost, something you don't see everyday. Brock Spectre is a Superstar between life and death, but even in that limbo he is a mighty wrestler non the less. A respectable statline that focuses on quantity over quality, with 3 out of the 4 stats rocking 3 dice with a rainbow of colours. 

The Soulspear rope attack has jump and fury, this means Brock chooses who's gonna be struck, he then follows it up with a bloody fisted Brawl attack. Brock comes with not one but two Grapple abilities, the first is the Guillotine Choke, a base damage of 2 and Bleeding means the damage will linger on. The Ghost Suplex is his second Grapple ability, this move gives the enemy wrestler -AP and Brock swaps position with the target wrestler.

Spectral means that Brock cannot be pinned however he cannot pin enemy wrestlers, not much physical touch through being a ghost. Brock's Crowd Please is questionable in the rules of wrestling as he makes use of the knife in his chest, in a Spectre Knife Fight. This removes a gold Stamina to one enemy wrestler.

Contains 1 resin multi-part miniature with square acrylic base.

The Keep Casino. Resin miniature supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Note that clear acrylic bases have a peelable protective film. Miniatures supplied with square bases.

Sir Hugh Man is definitely a human wrestler person. Sir Hugh Man enjoys barbeques and smoking meats, like a human. He? They? Also order multiple kids meals whenever they get takeaway, a completely normal thing for a human wrestler to do and not a bunch of goblins in a single suit of armour.

Strength in numbers has never been more true than it is with Sir Hugh Man. Don't be fooled by the single Copper in this wrestler's Stats, the +4 means not many can stand up to this "Stacked" wrestler.

This group of goblins will Knockdown any they hit with the Goblin Ballista, a fearsome rope ability that will shove the toughest wrestlers across the ring. Nothing is more feared than the 5 Point Flying Gobdrop, this Devastating Turnbuckle ability can deal a massive 6 damage (if the goblins are fully stacked), making it one of the highest base Damage moves in the game.

Being a stack of goblins does have its downsides, as for every 2 Stamina this wrestler takes, a gobbo falls off and that reduces the pluses to their? It's? stats. Not too much to fear though, because with a small amount of Crowd Pleaser Support a goblin gets back on a replenishes 2 Stamina.

Contains 1 resin multi-part miniature with square acrylic base.

Resin miniature supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Note that clear acrylic bases have a peelable protective film. Miniatures supplied with square bases.

"Ma'am, these miniatures you've made of the Scourge fleet are very useful for organising our battleplans!"
"Thank you, midshipman. And look at the airbrush transitions I did on them!"

This set contains 3 heavy ship bases and 1 superheavy ship base. Laser cut from clear acrylic, these bases are designed for use with heavy and superheavy tonnage ships in Dropfleet Commander.

Each base has a flight stand and widget. These are useful for being able to take the bases off for transport!

"Ma'am, these miniatures you've made of the Scourge fleet are very useful for organising our battleplans!"
"Thank you, midshipman. And look at the airbrush transitions I did on them!"

This set contains 6 Medium bases. Laser cut from clear acrylic, these bases are designed for use with medium tonnage ships in Dropfleet Commander.

Each base has a flight stand and widget. These are useful for being able to take the bases off for transport!

The Amazon, Argonaut, and Myrmidon are pre-war variants of the more common Trident Grand Battleship. While all based off of the same hull, many of these ships are entirely unique.

The Amazon sports the longest and highest calibre weapon ever built into a human starship, The Annihilator. This massive mass driver is backed up by a pair of heavy vent cannons and a salvo of close action missiles for incredible, yet cumbersome killing power. The Argonaut is a ship much more suited to longer range, less combat heavy duties. It's broadside artillery cannons can pummel ships under a staggering volume of shots, while a limited number of torpedoes seek out heavier targets, all backed up by four close action missile turrets. The Myrmidon is an all rounder, with a pair of forward mounted heavy vent cannons and a gargantuan scanning array replacing the Argonaut's torpedoes.

Contains 1 multi-part resin miniature able to be assembled in three variants (with loads of different combinations), and a plastic Dropfleet Commander base and flight stand.

Resin miniature supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

"Ma'am, these miniatures you've made of the Scourge fleet are very useful for organising our battleplans!"
"Thank you, midshipman. And look at the airbrush transitions I did on them!"

This set contains 6 small bases. Laser cut from clear acrylic, these bases are designed for use with light tonnage ships in Dropfleet Commander.

Each base has a flight stand and widget. These are useful for being able to take the bases off for transport!

"Wherever you want to go, I can take you there."

Capable of supporting four MULE modules or alternatives, The MULE Core is quite literally the core building block for thousands of cities across the federation. Endlessly stackable, Core towers constantly grow higher and higher as the city expands, and no citizen is ever at the top for long.  

The M.U.L.E Core kit is made from 3mm MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"I sure do hope that glass is bulletproof..."

Look, it's a hostile environment out there and we don't expect you to step outside but stairs take up too much room, therefore we've spent a fortune on these grav-lifts. Height is no issue* (*This has been untested) so as high as your structure goes, so do these!

The M.U.L.E Exterior Lift is made from 3mm MDF and Acrylic. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"Spacious and protected, what more could you want."

Whether it's housing a family of 4 in discomfort or storing the results of hideous experiments, the Hab module is the envy of P.U.P dwellers everywhere. Armoured walkways provide pleasant outdoor balconies useable even during the height of Riot Season.

The M.U.L.E Core kit is made from 3mm MDF. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included

"Is there a better way to show you've already won 'new planetary capitalism' than your own helipad?"

As the MULE stacks grow higher and higher, the upper levels become more dotted with personal Helipads. No respectable person would be without a luxury skimmer parked outside the penthouse, ready for a quick escape. Many are fitted with explosive release bolts to eject the module should a rival block decide it would make an excellent invasion point during the frequent block wars.

The M.U.L.E Helipad is made from 3mm MDF. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.