"You there, down there, you can't get me up here mwhaha!"

No need to be stuck on the ground with the Junction Plinth. Get to safety by raising the Junction to towering heights and leave the ground behind. 

The Cashstack Junction Plinth is to be used with the junction so that you can create a raised interconnected network between the Cashstack kits.

The Cashstacks Junction Plinth kit is made from 3mm MDF. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

Daggers are silent hunting creatures – Fauna that stalk from the shadows to attack their prey. They inhabit environs across the Cradle Worlds and can lay dormant for years, living off tiny scraps of food for long periods of time.

These dangerous Fauna are available to use in your games of Dropzone Commander, regardless of which faction you play. They inhabit buildings, making occupation an extremely tense idea!

The full unit profile for Daggers along with rules for using non-player Fauna are available in Reconquest: Phase 2.

Kit contains a random assortment of 9 resin miniatures supplied unpainted and unassembled with plastic bases.

“Mauler” is the catch all term for any hulking, belligerent beasts roaming over large areas in angry packs. No matter their actual genus, this subset of Fauna are always territorial, but over a much larger area than many other Fauna seen during the Reconquest. They patrol through cities and across plains searching for threats to their sovereignty, lashing out at any they see as encroaching upon their territory.

The fearsome Maulers are Fauna, non-player units that can be used in your games of Dropzone Commander, regardless of which faction you play. They hunt in packs of three, although even a single Mauler is enough to make trouble for the most seasoned of Commanders!

The full unit profile for Maulers along with rules for using non-player Fauna are available in Reconquest: Phase 2.

Kit contains 3 resin miniatures supplied unpainted and unassembled with plastic bases.

Resistance cells often have to make do with the equipment they have available. Sometimes it's more effective to keep the vehicles you do have operational than to find operational vehicles you don't have.

The Resistance have plenty of access to vehicles that they can convert into all manner of technicals. The majority of these will end up as either Rocket or AA Gun Technicals, though a small amount will end up used for less destructive purposes. Repair Technicals are able to enact quick battlefield repairs, patching up armour and fixing minor battle damage.

During the Scourge occupation, many resistance bands continued to keep man's best friend. These K9 Attack Units are the mongrel descendants of the purebred pets from days before the occupation. Kept in kennels affixed to K9 Technicals, they're unleashed upon the enemy in support of friendly troops.

Contains 6 K9 Attack Units and 6 Technicals that can be assembled as either K9 or Repair Technicals.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

"I do love a crate, so many uses beyond just shipping things."

The SIR (Stackable Intermodal Resource) shipping crate can be found across the federation, whether it's stacked in the holds of spacecraft, hanging from the clamps of dropships, traversing the ELMOR networks on the trailers of bulk crawlers, or aiding in the setup of the Cashstack Colonies. With its built in ladders, the SIR crates are often pressed into service as makeshift scaffolds and walkways after being emptied of their goods.

S.I.R Shipping Crates are stackable and functional with optional open or closed doors providing access ways or cover.

The S.I.R Shipping Crate kit is made from 3mm MDF. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

There's nothing better on a hot day than sitting at the fountain, dipping your hands in the cool water, and eating a buranelli. Perfect.

The Fish Fountain makes a perfect centrepiece for any Venetian piazza. With three tiers and exquisitely detailed fountainheads, its a stunning scenery piece to complete your board.

Offering three levels of scenery to jump onto, the Fish Fountain works perfectly in games of Carnevale, offering points to start your free-running chain.

Contains 1 resin miniature. The painted version pictured has had clear resin poured in to simulate water.

Resin miniature supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

For hundreds of years, the winged lion has been synonymous with Venice. Now, in the time of Carnevale, La Serenissima stands as a stoic protector of the rest of Europe, holding back the tide (both literally and figuratively) from pouring forth into the world.

This set contains two statues to decorate your boards. The brave lion stands aloft, sword in paw, and a noble completes the set - no need for a weapon when you're that powerful, a cane will do just fine!

The two statues sit on top of small plinths, making them too tall to jump onto from the floor, but the perfect height to chain jumps together from rooftop to rooftop in your games of Carnevale.

Contains 2 resin miniatures.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

"Let's flick a coin into the well and make a wish"

Do you want some clean water on your Venetian board for once? Well, well, well... That's exactly what you can expect from the Venetian Wells.

They also make perfect obstacles for jumping off in your games of Carnevale!

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

"Gather 'round...Gather 'round. Prepare to feast your eyes on creatures of myth and legend. Don't scream, you might... provoke them". What the Doctor revealed was truly a scene from myth and legend. Creatures both peculiar and majestic, exactly as the tales of their appearance describe. It was almost too magical to be true.

A growing menagerie comes bursting forth, giving the Doctors even more creatures to bring to the streets of Venice. On the job learning sees an Apprentice doctor trying to become a master of zoology corralling their charges. The Basilisk possesses potent venom that can incapacitate any unfortunate enough to feel its bite. Launching a hail of spines from afar is the Manticore, an agile creature with lethal accuracy and unsettling appearance.

Swooping from up high with its claws to bare is the Hippogryph, a great aerial option that the doctors can put to good use. Finally there is the largest of the beasts, the mighty Hippocampus, this sea stallion is perfectly at home at the crests of waves. Charging onto the streets from the canals, this seahorse can stun and knockback any unfortunate enemies in it's path.

Contains 5 resin miniatures and 5 plastic bases. Cobblestone bases pictured not included.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

These Behemoths bear more than a passing resemblance to the smaller Oppressor, although they upgrade to walking on eight legs instead of six. Though still fast, this makes the Scourge Light Behemoth somewhat slower than the heavy-limbed Heavy.

The Punisher is unleashed by the Scourge when they care little for collateral damage. Its forelegs are a pair of hive-like structures that can carry a range of munitions, from explosive pods, to Razorworms. Its tail houses a Quake Bombard, a weapon capable of shaking buildings right down to their foundations.

The Persecutor is the anti-behemoth variant. It is armed with an underslung Plasma Destructor - one of the most powerful plasma weapons the Scourge have comitted to conflict. Backing up this mighty weapon are hull mounted Heavy Plasma Cannons, they themselves are capable of turning armour into molten puddles.

Contains 18 single-piece resin miniatures with 6 plastic bases to make 6 units of Razorworms and 1 multi-part resin miniature with parts to assemble as either a Punisher Terror-Mech or a Persecutor Terror-Mech.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

Please note that Behemoths are massive kits, and advanced modelling projects. Extra care, attention, and hobby skills will be required to assemble and paint them. Because of that, this kit it is only recommended for advanced modellers. Some parts will need heating and bending to fit perfectly straight and slight gaps might need filling.

Although the Heavy was actually the first to hit the frontline, AHQ intends the Light form to overtake the Heavy in terms of numbers, given its lower cost and greater practicality. .

The Brazil and India are the UCM's Light Battle Mechs. These massive quadrupeds sit low to the ground, granting a modicum of cover for their large frame as well as ensuring that even if all legs are destroyed, they are merely immobilised.

Optimised for anti-behemoth roles, the Brazil carries a pair of UMH-2 Mass Drivers. While smaller than the main weapons on the America, they are much more practical and still able to take on the toughest of armour. On two of its legs are UM-88B chainguns for anti-air defence. The India trades out the large Mass Drivers for a set of 4 UMH-19 Flak Cannons. These weapons can make incredibly short work of enemy aircraft and are still large enough to threaten ground based armour.

Contains 1 multi-part resin miniature with parts to assemble as either a Brazil Light Battle Mech or India Light Battle Mech.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

Please note that Behemoths are massive kits, and advanced modelling projects. Extra care, attention, and hobby skills will be required to assemble and paint them. Because of that, this kit it is only recommended for advanced modellers. Some parts will need heating and bending to fit perfectly straight and slight gaps might need filling.

The Vulture has proven a reliable platform for the UCM, as more and more roll off the assembly lines, new variants are being created to fill potential niche's in combat doctrine. A pair of new aerial IFV's are currently being tested in both scout, and combat varieties.

Vultures Gunships come armed with two Twin Cannons, identical to the variants mounted on the Katana light tank, this gives the gunship respectable anti-tank firepower. The optional AA Battery gives the Vulture further versatility, allowing it to take on other aircraft. Alternatively, this kit can be assembled to make the Buzzard Aerial Target Craft, it loses out on one twin cannon, however is now a scouting vehicle. This gives it great versatility, allowing it to spot for units firing indirectly, as well as extend your commander's sphere of influence.

Both of these variants are set on the Vulture ship chassis, giving it good durability and high speed. It is also able to transport two troop units, allowing for high response board control.

Contains 1 multi-part resin miniatures with parts to make a Vulture Gunship or a Buzzard Aerial Target Craft. Also includes parts to arm both with AA Batteries.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

The Sarpedon class has been observed on multiple occasions at the head of so-called 'Javelin' strikes - lightning assaults on certain, enigmatic surface positions before rapid and unexplained retreats. Some suggest that limited ammunition payload may explain this, but senior operatives of the Office of Naval Intelligence suspect that's just wishful thinking.

Following the same design ethos as their dreadnoughts, all of the Sarpedon battleship’s main weapons are energy-based. Firstly, a linked pair of Meganova lasers provide superlative ship-slicing capability - even another battleship may be crippled by a single, sustained burn. Secondly, two hull-mounted multi-lance lasers can bracket and pulverise smaller ships with frightening ease.

The Kairos class has only just been observed in combat, and it’s superstructure suggests it is part of the Grand Fleet’s new family of battleships. The Kairos forgoes the Meganova lasers in favour of additional drives for a massive increase in combat speed. It uses battleship-grade munitions which can inflict crippling damage to any target. Once in the fray, the class’ hull-mounted multi-lance lasers can mop up any escort vessels fleeing the flaming wreck of the Kairos’ latest victim.

The Rhadamanthus has been operating since just prior to the opening salvos of the Battle For Earth. Unlike the other vessels, the Rhadamanthus uses the PHR’s older power core structure, most likely because it was rushed into service. Augmenting the fearsome neutron missiles with even more close action weaponry, this is the PHR’s most aggressive battleship, since these weapon’s low power consumption allow it to achieve the same blistering thrust as the Kairos.

Contains 1 resin miniature with parts to assemble three variants, and 1 plastic Dropfleet Commander base and flight stand.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

Unlike the familiar Platinum class, the Gold is a far more aggressive vessel. As one of the Shaltari's premier assets the Gold is a worthy chariot for the mightiest of attack-oriented Starchiefs.

The Gold class Supercarrier is relatively new and rarely seen. Mounted upfront is the powerful, close-action microwave arrays of its sister classes. Armed with the Ion Cannonade, the Gold is a terror to almost any vessel, and that’s before its swarms of formidable Shaltari bombers strike.

Although many Shaltari ships can be considered unusual, the Bronze class battleship is especially so. At the prow, it mounts the fearsome Ion Cannonade. On the ship’s back, it mounts a Gravitic Beamer. While damaging enough on a basic level, this weapon’s real threat comes from its effectiveness against ships in atmosphere and its tendency to literally shove ships forward, often into unfortunate places. Lastly, the ship mounts twin broadside crescents of microwave emitters for close-in killing power.

Closely related to the Bronze, the Silver class battleship also features a broadside microwave array and a prow-mounted Gravitic Beamer, but replaces the Ion Cannonade with the spectacular Obliterator Cannon. These generate a cracking flow of unstable, rare particles, then channels them through a small emitter nozzle at the unfortunate target. For a Shaltari weapon, It is uncharacteristically random in its destructive power.

Contains 1 resin miniature with parts to assemble three variants, and 1 plastic Dropfleet Commander base and flight stand.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

The clinking of many flagons ring out into the night air of this raucous dwarven tavern.

The Rusty Flagon Tavern kit is a large multi storey building with many connection points that allow it to be used with all our other Savage Domain kits.

This kit follows a strict grid structure too, meaning that it can be used for table top roleplaying games as well as skirmish games.

The Rusty Flagon Tavern is made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Marshal the forces, bring them forth from below!"

The Warriors Hall is a two storey building that functions perfectly as an end cap for intricate layouts with other Savage Domain kits.

This kit follows a strict grid structure too, meaning that it can be used for table top roleplaying games as well as skirmish games.

The Warriors Hall is made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Keep the torches lit and your eyes open, the enemy could be anywhere!"

The Watchtower is a modular kit with one block, two towers and two ladders. They can function together as a standalone watchtower or as a part of a larger layout with other Savage Domain kits.

This kit follows a strict grid structure too, meaning that it can be used for tabletop roleplaying games as well as skirmish games.

The Watchtower is made from 3mm MDF. It is a great scenery kit to use in fantasy skirmish games as well as roleplaying games, and will work perfectly with 28-32mm games and miniatures.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"The perfect place to be sipping on slurpdregs"

It's one thing to have a new home, but we all know it's meaningless if you can't look

down on those below, and that's where the C.A.S.Hstack Balcony's got you covered! Providing a spacious outdoor area for barbecues, evening drinks and suppressing fire, the Balcony should be considered an essential upgrade for any new C.A.S.Hstack Block owner!

The Cashstack Balcony can be stacked with other blocks, demi blocks create outside expansion areas.

The Cashstacks Balcony kit is made from 3mm MDF. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"Ever wanted to see the underside of your house? Now you can."

Rise to the heavens without spending the Earth with the C.A.S.Hstack Block Legs!

Easily attached to Blocks and Demi-Blocks, the Block Legs are an affordable way to

add a bit of height to your home, whether you need to get above the pollution layer

or just show your neighbours you're that little bit better.

The Cashstack Block legs are for use with the blocks and demi blocks to create height for your gameboard.

The Cashstacks Block Legs are made from 3mm MDF. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"I am reliably informed that the first order of C.A.S.Hstacks is on its way right now and soon we'll be sipping slurpdregs on the balconies of our Comfortable And Spacious Housing!"

The colonization phase is over and now it's time to rise up out of the mud and settle into

your new home in the Comfortable And Spacious Housing Stacks! Leave those dingy PUP's behind and enjoy light and airy living conditions!

The Cashstack Block can be stacked with other blocks, demi blocks, or freestanding and can be linked with walkways, balconies and more from the Cashstacks range to build a sprawling colony.

The Cashstacks Block kit is made from 3mm MDF. It is a great scenery kit to use in Sci-Fi skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on any Sci-Fi inspired game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.