Here lies Arthur, the village rebel. Drank one too many and fought one too many more.

Do you want to add more to your board? Have a Wild West Church that is in need of a graveyard? The Gravestones contains a random selection of 40 Gravestones and are a perfect addition to any 28-32mm gaming board.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

"Do not sing the bell song, do not sing the bell song"

Toshi: Hakkaku-ji Temple, the first in resin and MDF combo kits for maximum detail! Featuring a removable roof and functioning resin doors, this kit is full of playability and detailing! From the resin Bonsho Bell to the Torii Gates, this kit is sure to be a centerpiece to any Eastern-inspired game board.

The Toshi: Hakkaku-ji Temple kit is made from 3mm MDF and Resin Accessories. It is a great scenery kit to use in Fantasy skirmish games, will work perfectly with 28-32mm games and miniatures, and look great on an Eastern Inspired Temple game board.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Some kits may need filing for a perfect fit - always dry fit your models first for best results. Any miniatures are for scale only and are not included.

"Scramble fighters, all pilots, all pilots, we have enemy birds incoming fast!"

The Aircraft Hangar is a large structure with moveable doors and roof allowing for interior play. With the balcony over the doors able to accommodate a miniature base there are multiple playable spaces in this kit.

Used alone or next to mulptiple others of this kit, the Aircraft Hangar would be perfect to create an airbase board for your historical battles.

This kit is made from 3mm MDF and has been designed for 25mm historical games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Where did that car go?!"

"1980s? It's the time travel lane"

An ELMOR network at night is a dazzling sight, with miles of luminescent Autodrive sensors, glowing holographic road signs, and strobing billboards advertising the latest must-have products.

Add extra cosmetic and gameplay features to your ELMOR network with this pack of accessories. Signs can be positioned almost anywhere on a low or SkyLevel section, hanging billboards add detail to SkyLevel sets while a fire escape adds an alternate route for figures to move from the tabletop to the SkyLevel road surface.

This kit contains two fire escapes, four barricades, two road signs, two hanging signs and one junction sign.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

The kit supplied is unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and are not included.

"You're driving me around the bend"

Once a new Federation planet has been pacified and the PUP colonies have begun

springing up over the planet's surface, ELMOR (ELevated MOdular Road) networks are

quickly put in place to connect the burgeoning population. If the PUP colonies are the fabric of the rapidly expanding Federation, the ELMOR is the thread that binds them together.

The ELMOR is the ultimate tabletop road system, scaled for 28-32mm wargames and totally flexible. Quickly and easily set up with a connecting clip system, fences and road surfaces can be easily removed in seconds to ensure the ELMOR will find a place in every battle. Combine low-level sets with sky-level sets to add a new dimension to your game! This kit contains two corner sections.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

The kit supplied is unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and are not included.

"We can't sit here all day, get on or get off!"

Once a new Federation planet has been pacified and the PUP colonies have begun

springing up over the planet's surface, ELMOR (ELevated MOdular Road) networks are

quickly put in place to connect the burgeoning population. If the PUP colonies are the fabric of the rapidly expanding Federation, the ELMOR is the thread that binds them together.

The ELMOR is the ultimate tabletop road system, scaled for 28-32mm wargames and totally flexible. Quickly and easily set up with a connecting clip system, fences and road surfaces can be easily removed in seconds to ensure the ELMOR will find a place in every battle. Combine low-level sets with sky-level sets to add a new dimension to your game! This kit contains two low ramps and junctions.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

The kit supplied is unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and are not included.

"There's an overwhelming urge to play a song about a road right now..."

Once a new Federation planet has been pacified and the PUP colonies have begun

springing up over the planet's surface, ELMOR (ELevated MOdular Road) networks are

quickly put in place to connect the burgeoning population. If the PUP colonies are the fabric of the rapidly expanding Federation, the ELMOR is the thread that binds them together.

The ELMOR is the ultimate tabletop road system, scaled for 28-32mm wargames and totally flexible. Quickly and easily set up with a connecting clip system, fences and road surfaces can be easily removed in seconds to ensure the ELMOR will find a place in every battle. Combine low-level sets with sky-level sets to add a new dimension to your game! This kit contains two straight sections.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

The kit supplied is unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and are not included.

"End of the road, buddy"

Once a new Federation planet has been pacified and the PUP colonies have begun

springing up over the planet's surface, ELMOR (ELevated MOdular Road) networks are

quickly put in place to connect the burgeoning population. If the PUP colonies are the fabric of the rapidly expanding Federation, the ELMOR is the thread that binds them together.

The ELMOR is the ultimate tabletop road system, scaled for 28-32mm wargames and totally flexible. Quickly and easily set up with a connecting clip system, fences and road surfaces can be easily removed in seconds to ensure the ELMOR will find a place in every battle. Combine low-level sets with sky-level sets to add a new dimension to your game! This kit contains one road end section.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

The kit supplied is unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and are not included.

"Hope you aren't afraid of heights"

Once a new Federation planet has been pacified and the PUP colonies have begun

springing up over the planet's surface, ELMOR (ELevated MOdular Road) networks are

quickly put in place to connect the burgeoning population. If the PUP colonies are the fabric of the rapidly expanding Federation, the ELMOR is the thread that binds them together.

Replacing the existing feet on the Low-Level Straights or Corners, the Skylevel legs can bring a new vertical dimension to your gameplay. Combine with the Skylevel Ramp kit to create a sprawling maze of roads. This kit has 1 pair of legs and 4 connectors. Road sections are for illustration purposes only.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

The kit supplied is unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and are not included.

"Look, why level the ground when I can just build over it."

When the existing ELMOR network is too small for a colony's population the solution is to build upwards! Some established planetary populations enjoy a transit system so multi-tiered that the wealthy living on the high floors of the LuxHabs can go about their business without ever having to endure the grubby conditions on the surface below.

Convert a standard ELMOR set into a SkyLevel network with this pack of support legs

and connectors for even more gameplay flexibility by replacing the existing feet! Combine with the Skylevel Ramp kit to create a sprawling maze of roads. This kit has 1 pair of legs and 4 connectors. Road sections are for illustration purposes only.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

The kit supplied is unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and are not included.

"Onwards and upwards!"

When the existing ELMOR network is too small for a colony's population the solution is to build upwards! Some established planetary populations enjoy a transit system so multi-tiered that the wealthy living on the high floors of the LuxHabs can go about their business without ever having to endure the grubby conditions of the colony below.

The ELMOR is the ultimate tabletop road system, scaled for 28-32mm wargames and totally flexible. Quickly and easily set up with a connecting clip system, fences, and road surfaces can be easily removed in seconds to ensure the ELMOR will find a place in every battle. The SkyLevel ramp joins a standard ELMOR network to the SkyLevel system high above them, allowing for even more gameplay options!

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

The kit supplied is unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and are not included.

"Don't get seasick now, the beach is just there. Check your ammo, check yourselves and check each other."

The Landing Craft kit is perfect to recreate a historical beach landing scenario. There is enough playable space inside the craft to contain a unit of troops or a small tank.

The front ramp is fully articulated meaning it can be lowered once your troops hit the beach. The kit also comes with hedgehogs to add extra detail to your gaming boards and provide precious cover to your models.

This kit is made from 3mm MDF and has been designed for 25mm historical games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Ah-hah! Squares are much more efficient"

Designed for maximum flexibility, the MOD.CO.N range makes it easy to create sprawling complexes for indoor-action scenarios. Floors are engraved with 40mm square details for compatibility with popular games. This kit contains two 2x2 straight sections.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

The kit supplied is unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and are not included.

"I'm getting Deja-vu"

Designed for maximum flexibility, the MOD.CO.N range makes it easy to create sprawling complexes for indoor-action scenarios. Floors are engraved with 40mm square details for compatibility with popular games. This kit contains three 1x2 straight sections.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

The kit supplied is unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and are not included.

"I'm starting to notice a trend..."

Designed for maximum flexibility, the MOD.CO.N range makes it easy to create sprawling complexes for indoor-action scenarios. Floors are engraved with 40mm square details for compatibility with popular games. This kit contains two 3x2 straight sections.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

The kit supplied is unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and are not included.

"These really just keep going, huh?"

Designed for maximum flexibility, the MOD.CO.N range makes it easy to create sprawling complexes for indoor-action scenarios. Floors are engraved with 40mm square details for compatibility with popular games. This kit contains one 4x2 straight section.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

The kit supplied is unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and are not included.

"Now I can really go where I want! No more endless corridors"

Designed for maximum flexibility, the MOD.CO.N range makes it easy to create sprawling complexes for indoor-action scenarios. Floors are engraved with 40mm square details for compatibility with popular games. This kit contains one 4-way cross-section.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

The kit supplied is unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and are not included.

"So there is an entrance/escape to this madness..."

Designed for maximum flexibility, the MOD.CO.N range makes it easy to create sprawling complexes for indoor-action scenarios. Floors are engraved with 40mm square details for compatibility with popular games. This kit contains one 1x2 platform and two bulkhead doors.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

The kit supplied is unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and are not included.

"Corners as well?! Guess I can't see where this is going"

Designed for maximum flexibility, the MOD.CO.N range makes it easy to create sprawling complexes for indoor-action scenarios. Floors are engraved with 40mm square details for compatibility with popular games. This kit contains onecorner section.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

The kit supplied is unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and are not included.

"Sometimes corners just get in the way of a big, open, sprawling room"

Designed for maximum flexibility, the MOD.CO.N range makes it easy to create sprawling complexes for indoor-action scenarios. Floors are engraved with 40mm square details for compatibility with popular games. This kit contains eight corner blocks
This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop it is suitable for 28-32mm scale miniature games.

The kit supplied is unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and are not included.