What kind of monster caused all this destruction? Maybe a giant sea serpent or a walking, hulking statue? Or maybe just natural subsidence?  Given Venice's reputation, it could be all three.

Have you ever seen a more varied gaming surface? Carnevale is all about multiple levels of combat, darting over rooftops and through narrow alleyways. And now there's a terrain piece that does all of the above! With an open bottom floor, climbable middle and large balcony on top, the Ruined Modular Casa Balcone Simona has something to offer all of your characters!

The Modular Venetian kits all work together to form something better than the sum of their parts. Using a handy clip system that the buildings sit on top of, you can link any of these kits together to create an intricate and complicated group of houses - the exact kind you find in Venice!

This kit is made from 3mm MDF and has been designed for Carnevale, using multiple storeys to climb and jump, and roofs at easy angles so that miniatures will not fall off when darting across the Venetian skyline. It is a great piece of scenery to use with other 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

I bet this used to be a nice little cottage. Before the bad times...

The Ruined Modular Casa Doppia Perina opens up your games of Carnevale to new areas - the inside of a building! While most houses and shops are locked up tight at night time, the Perina might be hard to lock up considering half of it is missing! Multiple levels makes climbing so much easier for all involved, whether you're a fish monster or wearing full plate armour.

The Modular Venetian kits all work together to form something better than the sum of their parts. Using a handy clip system that the buildings sit on top of, you can link any of these kits together to create an intricate and complicated group of houses - the exact kind you find in Venice!

This kit is made from 3mm MDF and has been designed for Carnevale, using multiple storeys to climb and jump, and roofs at easy angles so that miniatures will not fall off when darting across the Venetian skyline. It is a great piece of scenery to use with other 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"This building looks like it's seen better days! And so does that one over there!"
"That's the same building."

The Ruined Modular Casa Doppia Quieta is in a bit of trouble! Not only is the roof falling in, but the walls have completely collapsed! Able to be set up as two halves of a single building or as two completely separate ruins, this Quieta will give you loads of levels for a bargain price!

The Modular Venetian kits all work together to form something better than the sum of their parts. Using a handy clip system that the buildings sit on top of, you can link any of these kits together to create an intricate and complicated group of houses - the exact kind you find in Venice!

This kit is made from 3mm MDF and has been designed for Carnevale, using multiple storeys to climb and jump, and roofs at easy angles so that miniatures will not fall off when darting across the Venetian skyline. It is a great piece of scenery to use with other 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Is it a bridge? Is it a house? No! It's both!

This set contains two separate buildings, which - when paired together - make a whole bridge! If you use the two Villetta Ponte Wandas separately, they have a little cover and a doorway which lead straight onto the canal - perfect for parking your gondola outside. Put them together and use the steps to walk safely across the canal.

The Modular Venetian kits all work together to form something better than the sum of their parts. Using a handy clip system that the buildings sit on top of, you can link any of these kits together to create an intricate and complicated group of houses - the exact kind you find in Venice!

This kit is made from 3mm MDF and has been designed for Carnevale, using multiple storeys to climb and jump, and roofs at easy angles so that miniatures will not fall off when darting across the Venetian skyline. It is a great piece of scenery to use with other 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

This towering structure must have been beautiful in its day. Today, however, is not its day.

Be careful when climbing the Ruined Modular Villetta Triplicare Rosa! Its floors are falling in, and there's not much left of its walls either! All the better for intrepid Carnevale adventurers though, as it provides plenty of opportunity for easily climbing up to the highest levels of the rooftops.

The Modular Venetian kits all work together to form something better than the sum of their parts. Using a handy clip system that the buildings sit on top of, you can link any of these kits together to create an intricate and complicated group of houses - the exact kind you find in Venice!

This kit is made from 3mm MDF and has been designed for Carnevale, using multiple storeys to climb and jump, and roofs at easy angles so that miniatures will not fall off when darting across the Venetian skyline. It is a great piece of scenery to use with other 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

"Well these streets have definitely seen better days."

This kit contains enough street sections to make a 2'x2' board (with space for canals). We based the street sections on the cardboard tiles found in the Carnevale 2-Player Box, which makes this a great upgrade to those tiles.

The San Canciano Block Streets are made from 3mm MDF. They are great pieces of scenery to use for Carnevale and will work perfectly with other 28-32mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included. This set contains:

• 2 plaza Ruined Street sections. (The Plaza section can be opened up into two pieces, allowing you to fill out your board really easily and quickly.)
• 1 Large Ruined Street section
• 2 Small Ruined Streets
• 2 Ruined single street tiles (These can be connected together to form one compact street tile or separated to fill out the board.

Nestled in southern Cannaregio, the San Geremia Tower is a massive edifice, looking out over the whole of Venice. It sits next to the Grand Canal, so is no stranger to flooding and strange sea creatures bustling around underneath.

What can we say about the San Geremia Tower that pictures don't say? It's massive!

At 70cm tall, it's one of the biggest kits we've ever made, and the tallest Streets of Venice building in the entire range. With multiple playable surfaces, it was designed for gaming, as well as looking pretty impressive!

With balconies, wooden sills, and plenty of ladders, there are loads of places for your characters to rest on their ascent (or descent - jumping off is not advised), meaning the entire thing is not just a great centrepiece, but a fully playable gaming piece too.

The Tower is designed to be as easy to assemble and store as possible, coming apart into several different pieces so you don't have to have a massive container to store it between games. Although - let's be honest - if you're going to build and paint something as ludicrously big and awesome as this, you're going to want it on display!

This kit is made from 3mm MDF and has been designed for Carnevale, using multiple balconies and vantage points to climb and jump, with big enough footholds that miniatures will not fall off when climbing to the top of the Venetian skyline. It is a great piece of scenery to use with other 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Not all of Venice is in shining glory. The Rent mostly avoided La Serenissima, but the floods still took their toll, and some parts haven't yet been repaired.

This kit contains 2 small and 1 medium damaged Street sections. These varied pieces can be used to make a completely ruined Venetian board, or just add a little rough around the edges to your existing set.

The Small Ruined Streets are made from 3mm MDF. They are great pieces of scenery to use for Carnevale and will work perfectly with other 28-32mm games.

Models supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Nothing says "made it" more than a private canal-side entryway into your home. Although nothing says "bad building planning" more than a door that leads straight into the water.

This set contains 2 small stairs, 2 wide stairs, 2 tiny street blocks, 1 wide tiny street block, and a tiny bridge. They're designed to fit perfectly with the rest of the Venetian Streets sections, adding a safe vertical path into and out of canals, or up and down levels of street sections. The small size of these pieces allows them to be used in all sorts of spaces, giving loads of mobility to otherwise hard-to-access areas of the board.

The Venetian Canal Street Stairs are made from 3mm MDF. They are great pieces of scenery to use for Carnevale and will work perfectly with other 28-32mm games.

Models supplied unpainted and require assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Looking out over the roofs of Venice is like looking at trees in a forest. The chimneys looking up to the stars and billowing smoke out into the sky.

For those that like a little more detail on their buildings, the Venetian Rooftop Accessories are for you!

The set contains all manner of chimneys, taken from traditional Venetian designs (yes, even the twisty one). They're small enough to stick onto almost any building, and act as great obstacles for jumping on and freerunning over.

The set also contains various platforms. These are designed to fit on almost all of the Streets of Venice range, simply clipping onto the horizontal beams on the buildings. They're made to be big enough to support 30mm bases comfortably with very little chance of your lovingly painted miniatures falling to the ground.

The Venetian Rooftop Accessories contains eight wall platforms, sixteen chimneys, and two moving cranes. Half of the accessories are designed for flat roofs and the other half designed for sloped roofs.

This kit is made from 3mm MDF and has been designed for Carnevale, with each accessory acting as a handy platform for climbing or a small obstacle for activating your chained jumps, even at rooftop level! It's also a great kit to use with other 28-32mm games, decorating any older style building in interesting and realistic ways.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Don't fall in!

This kit contains 30 Venetian Street Railings sections, and a whole bunch of connectors. These railings are fully modular, allowing you to add them to your Venetian Streets sections at the start of every game.

Using a simple scissor lock design, each railing can be combined with any other, and using the additional connectors the railings can span vast lengths and turn corners with ease. There are even 2 railings that are a little bit longer to sit nicely on the Corner Street sections.

Once you've clipped them on and played your game, simply pop them off and pack them up for next time!

The Venetian Street Railings are made from 3mm MDF. They are great pieces of scenery to use for Carnevale (especially to jump onto!) and will work perfectly with other 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Tired of jumping into your fancy gondola from the edge of the canal? Well, with these jetties you can walk out over the water with ease! Just make sure to bring a weapon with you as your risk of Rashaar attack is DRASTICALLY increased. 

This kit contains a whole load of jetty sections. With twelve individual sections that run from pristine to slightly worse for wear, all the way to broken in half, you'll have every type of jetty you need! The sections fit perfectly underneath the wooden streets, allowing you to realise Venice like never before.

The Wooden Jetties are made from 3mm MDF. They are great pieces of scenery to use on the tabletop for Carnevale and will work perfectly with other 28-32mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Can those meddling Guild stop running on my roof!

The Calle al Ponte da Lucca is a beautiful set of 3 buildings that offer a wide magnitude of options to the tabletop. They are of varying height allowing for Carnevale models to easily scale the buildings when used alongside each other. However these are also perfect to be split up and placed away from each other on a table top.

The Modular Venetian kits all work together to form something better than the sum of their parts. Using a handy clip system that the buildings sit on top of, you can link any of these kits together to create an intricate and complicated group of houses - the exact kind you find in Venice!

This kit is made from 3mm MDF and has been designed for Carnevale, using multiple storeys to climb and jump, and roofs at easy angles so that miniatures will not fall off when darting across the Venetian skyline. It is a great piece of scenery to use with other 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

I was hoping these monsters would have left after destroying my town. But no, they just live among us.

The Gèto del Pozzo is a once beautiful set of 5 buildings that offer a wide magnitude of options to the table top. They are of varying height allowing for Carnevale models to easily scale the buildings when used alongside each other. However these are also perfect to be split up and placed away from each other on a table top.

The Modular Venetian kits all work together to form something better than the sum of their parts. Using a handy clip system that the buildings sit on top of, you can link any of these kits together to create an intricate and complicated group of houses - the exact kind you find in Venice!

This kit is made from 3mm MDF and has been designed for Carnevale, using multiple storeys to climb and jump, and roofs at easy angles so that miniatures will not fall off when darting across the Venetian skyline. It is a great piece of scenery to use with other 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

My home was once so beautiful, now it's just a heap of rubble

The Gèto Rifformati is a once beautiful set of 3 buildings that offer a wide magnitude of options to the table top. They are of varying height allowing for Carnevale models to easily scale the buildings when used alongside each other. However these are also perfect to be split up and placed away from each other on a table top.

The Modular Venetian kits all work together to form something better than the sum of their parts. Using a handy clip system that the buildings sit on top of, you can link any of these kits together to create an intricate and complicated group of houses - the exact kind you find in Venice!

This kit is made from 3mm MDF and has been designed for Carnevale, using multiple storeys to climb and jump, and roofs at easy angles so that miniatures will not fall off when darting across the Venetian skyline. It is a great piece of scenery to use with other 28-32mm games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Catalya comes from a large family of wrestlers, although very few have become RUMBLESLAM Superstars!

Catalya is a born and bred wrestler, though her gladiatorial family have given her teeth in the ring!

Catalya is an expert support grappler, with a solid defence to boot. Not only does she bring some feline grace with the Feline special rule (that all Rostani share), she also spits straight fire! Her Catty by Nature Crowd Pleaser can even strip opposing wrestlers of their Crowd Pleaser, talk about a put down! We haven't even gotten to her Discus Clothesline, with Knockdown, it's the perfect setup for her other moves. Once Catalya has given both a literal and verbal beatdown, her Bow & Arrow Stretch can really put a pin in an enemy's day!

Contains 1 resin miniature, 1 character card, and 1 clear acrylic base. Acrylic bases will have coloured film on that needs removing before assembly.

Resin miniature supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

There are two things that this Djinn holds in higher regard than anything else: upholding the magical sanctity of the wish-granter, and FAMILY!

Djinn Diesel is here to grant Three Wishes to fellow wrestlers whilst rolling dice as fast and furiously as possible, just be careful not to lose his lamp!

This Superstar is a solid all-rounder but offers great support to friendly wrestlers thanks to his 'Three Wishes' ability. Starting the game with 3 Golden Dice, at any time after rolling dice with any friendly wrestler, that wrestler may choose to make a SINGLE wish and add a Golden Dice to their roll. That's some powerful magic! Djinn is always looking to unleash his Phenomenal Cosmic Powerbomb but be mindful of his 'Itty Bitty Living Space' as if he's KO'd, he returns to his lamp and counts as a weight 1 wrestler.

Contains 1 resin miniature, 1 character card, and 1 clear acrylic base. Acrylic bases will have coloured film on that needs removing before assembly.

Resin miniature supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

From an unknown galaxy, Colonel Russ has arrived through a Spacegate and joined the fun happening at the Diamond Oasis. Luckily for this sunglass wearing solider, he's got backup in the form of Stargator who owes a life debt to the Colonel.

Stargaters are a space warping, go down fighting kind of tag-team. You'll definitely need some T'LC after facing this duo in the ring!

The Stargaters are the latest Space Gate wielding wrestlers to arrive in the Diamond Oasis. Colonel Russ' is a good all rounder but is the squishier of this tag-team. Good thing he's got Stargator's super tough scales to make up for it. Not only does Stargator have a solid defence, he's also got a Big Bite! A hefty attack that inflicts Bleeding. Being part Alligator, Stargator knows how to roll, with his Death Glider Roll leaving his opponents dizzy.

Colonel Russ isn't without a few tricks of his own, for one he's brought a gun! Don't worry, it's only a Squirt Gun. Between his water pistol and Snake Eyes grapple, Russ can really put down some suppressive fire, dishing out -AP counters like he was in an action movie.

The pair of them bring some Space Gates. These can be set up in unoccupied spaces in the ring and when ANY friendly wrestler moves onto one they are teleported onto the second gate. Better yet, these Space Gates can't be used in any other way (including by enemies).

Contains 2 resin miniatures, 2 character card's, 2 Resin Space Gates and 2 clear acrylic bases. Acrylic bases will have coloured film on that needs removing before assembly.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

Tin Khan is the ruler of an entire province! Very little is known about the mysterious land, other than it is filled with other automatons. Although scholars say that the automatons are entirely devoid of feeling, anyone that has seen Tin Khan after a particularly devastating loss will know that the statement is definitely not true.

Tin Khan is a slow moving ruler of the ring! He is devastatingly strong, tough and thanks to being made entirely out of metal* is extremely difficult to throw out of the ring. When bouncing off the ropes you had best hope this wrestler doesn't steam roll over you.

Tin Khan is one of the most durable wrestlers in RUMBLESLAM. Thanks to being a living automaton, he hits hard and has a solid defence, especially with Heavy Metal reducing the damage Tin Khan takes. The unfortunate side effect of being made of metal is that you often end up super slow. Still, when you can't outrun your opponent, knock them down. Cogwrench Suplex swaps the Khan's and his targets position, and knocks them down, ready for a metal fist to an unsuspecting face. Camel Clutch is a great option for those high AP characters that might run rings around the Khan. When the Khan manages to pass a crowd pleaser he turns into a veritable juggernaut, but be careful, Overclock also causes Tin Khan to lose stamina.

*Contains 1 resin miniature, 1 character card, and 1 clear acrylic base. Acrylic bases will have coloured film on that needs removing before assembly.

Resin miniature supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

Some say this raucous tavern really comes alive at dusk, but those who live near it know that the sounds of drinking and music never really die down.

This two storey tavern looks like the architect was drunk when the planning went through, Angular walls and a steep pitched roof look like the building should not stant without external support. Perhaps magic? Perhaps the sheer force of will from the drunks inside, who can tell!

Each section of this kit can be removed and the interior is fully playable just in case a bar room brawl kicks off. This would make a great centrepiece for any village board, especially combined with other buildings from the range.

Agatha's Stone Moon Tavern is made from 3mm MDF, is easy to put together and looks great on the tabletop. Great scenery to use with modern 28-35mm wargames or diorama's.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.