Every modern war needs to have weapons and machines. This three floored Factory building can pump out three times as much as a single floored factory, that's just maths and everyone knows bigger is always better.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for 15mm world war games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

Your boys on the ground need a helping hand? That's where air superiority comes in my friend. This hangar keeps the planes safe and refuelled when they aren't flying round bothering the birds.

This kit is made from 3mm MDF and 1mm Greyboard. It is a great piece of scenery to use on the tabletop for 15mm world war games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

The Control Tower provides advanced warning for incoming enemy fighters, allowing you to scramble a timely defence. The tower itself gives a high vantage point with a compliment of three radar stations to provide a wide coverage.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for 15mm world war games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

The Ruined Shops Set is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with Flames of War or other 15mm World War II games. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Contains 3 x Ruined shop buildings.

Any models shown in the photos are for scale only and not included.

The Ruined Townhouse Set is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with Flames of War or other 15mm World War II games. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Contains 4 x Destroyed Townhouse buildings and 2 x Damaged Townhouse Buildings.

Any models shown in the photos are for scale only and not included.

An advanced outpost has been set up on a farm next to the new airfield, factories have been built to provide parts and munitions while billet huts provide accommodation on base for the pilots. Checkpoints and radar towers keep watch over the land and sky to protect this new investment.

This bundle Includes one of each of the following sets: Barn, Billet huts, Checkpoint, Radar control tower, Factory, Hangar and Walls.

These kits are made from 3mm MDF and 1mm greyboard. It is a great bundle of scenery to use on the tabletop for 15mm world war games.

Models supplied unpainted and require assembly. We advise using PVA glue for the best results.

The Shops Set is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with Flames of War or other 15mm World War II games. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Contains 3 x Shop buildings.

Any models shown in the photos are for scale only and not included.

The Townhouse is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with Flames of War or other 15mm World War II games. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Contains 1 x Townhouse building.

Any models shown in the photos are for scale only and not included.

The Townhouse Set is made from 3mm MDF, easy to put together and looks great on the tabletop. Great scenery to use with Flames of War or other 15mm World War II games. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Contains 4 x Townhouse buildings.

Any models shown in the photos are for scale only and not included.

Your boys are on patrol through a quaint little french village, they get fired upon! Whats that? a quaint cobblestone wall? As impervious to bullets as it is lovely.

This pack of four walls contain 4 large walls and 4 small.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for 15mm world war games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

The Ruined Terrace House is made from 3mm MDF and 1mm greyboard. It is easy to put together and looks great on the tabletop. Great scenery to use with 28mm wargames. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Any models shown in the photos are for scale only and not included.

The Terrace House is made from 3mm MDF and 1mm greyboard. It is easy to put together and looks great on the tabletop. Great scenery to use with 28mm wargames. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Any models shown in the photos are for scale only and not included.

Perfect for hiding in, but with the doors closed, it's not great for flying a plane into and out again.

The Barn includes a working platform with bale hook and ladder, large double doors, a pitched roof with missing tile and features wooden trim details.

The Barn is made from 3mm MDF and 1mm greyboard. It is a great piece of scenery to use with 25 - 28mm war games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

"You know, fightin' in a broken theatre offers a lot of difficulties."

I do love going to the movies but sadly we have two problems. The current pandemic has made this super hard. This coupled with the fact the theatre is slightly destroyed is a bit problematic.

The façade of the broken theatre is truly something behold. Breath-taking and glorious, this is sure to distract the enemy from your troops approaching in mass. Take the battle to them in the streets! Right outside the theatre and the best is the cameras are already rolling. So many places to hid inside with great vantage points of the street.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

The Bunkers & Tank Traps Set is made from 3mm MDF and 1mm greyboard. It is easy to put together and look great on the tabletop. Great scenery to use with Flames of War or other 15mm World War II games. Models supplied unpainted. The models may require preparation prior to painting.

Any models shown in the photos are for scale only and not included. Contains -

• 4 x Bunkers (2 x Hexagon, 2 x Pentagon)
• 6 x Tank Traps

Open your song sheet to page 4 and we'll sing "Praise to the MDF".

The Chapel makes a fine centre piece to any board, adding a bit of rural elegance. Complete with 6 pews, there is space enough for all your parishioners.

This kit is made from 3mm MDF, it is easy to put together and looks great on the tabletop. Great scenery to use with 25mm wargames.

Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Sure it's a little cramped, especially for a family of 8, but it's the best we have on offer. The rest of the street is kind of... falling down.

The 25mm City 2-Storey Rowhouse perfectly conjures the look of a small town French residential district. Covered in excellent detail, it'll fit right into your historical games. The floors are removable, so you can get models inside for cover or tense indoor fighting.

The Rowhouses look great on their own, but are designed to sit next to each other perfectly, making whole city streets of beautiful French inspired architecture.

This kit is made from 3mm MDF and has been designed for 25mm historical games. Perfect for a World War setting, it's also useful for modern or fantasy games too.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

You can fit a dozen cowering families in a building like this! It's... well it's pretty grim. This is a serious historical subject, it's hard to write fluff text!

The 25mm City 2 Storey Terrace makes for a great kit in your World War settings. Modelled after French town houses of the era, it's big enough to garrison with troops, and easy too, thanks to it's removable roof.

This kit is made from 3mm MDF and 1mm Greyboard and has been designed for 25mm historical games. Perfect for a World War setting, it's also useful for modern or fantasy games too.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

What a marvellous fountain! This would be a great place to bunker down and have a shoot out. Or a picnic, in peacetime.

The 25mm City Fountain is an excellent accessory for your board. While it isn't a sprawling network of buildings or bunkers, it provides some good cover and will really help your battlezone to feel grounded and realistic.

This kit is made from 3mm MDF and has been designed for 25mm historical games. Perfect for a World War setting, it's also useful for modern or fantasy games too.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

You can almost smell the smell of fresh French pastries and coffee out of the window of this house! Of course, when you build it all you'll actually smell is that sweet smell of burned MDF. Better than coffee, that's for sure!

The 25mm City Rowhouse is a great start to a whole French city. Covered in excellent detail, it'll fit right into your historical games. The floors are removable, so you can get models inside for cover or tense indoor fighting.

The Rowhouses look great on their own, but are designed to sit next to each other perfectly, making whole city streets of beautiful French inspired architecture.

This kit is made from 3mm MDF and has been designed for 25mm historical games. Perfect for a World War setting, it's also useful for modern or fantasy games too.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.