Type-7 Grand Walkers are the largest of the PHR constructs. A crew of four work alongside the Behemoth’s on-board AI. Type-7s fit perfectly with the PHR war ideology, bringing thick armour and devastatingly high powered guns to battle.

The PHR Behemoth is a true spectacle of a kit. Behemoths are the largest Dropzone Commander models you can get, and are incredibly impressive models. Able to be built as either a Chronus or Tethys pattern, this kit contains 40 total parts, with plenty of options for the two variants. The five legs come in 4 pieces each, allowing unparalleled customisation.

The PHR Behemoth comes complete with a dizzying array of weapons. Its smallest Miniguns are equal to those found on a Hades Scorpion, all the way to the Nova

Missiles - some of the biggest warheads in the game. The Chronus is armed with a pair of R7X-1 Railguns, which at around twice the size of the Tiamat’s are the

largest Railguns available to the PHR, able to tear holes through other Behemoths with ease. Stealth-X Missile Clusters and R7X-5 Rotary Cannons complete the Chronus, giving it massive firepower against vehicles and infantry as well.

The Tethys instead has a pair of R7X-2 Sunglaives. These weapons are powerful in their own right, but can be overcharged for unbelievable damage. The Tethys is also armed with R7X-66 Incinerators to make light work of any infantry that dare to get

close, while a White Nanomachine Colony keeps the Behemoth functioning long after damage should have made it inoperable.

Contains 1 multi-part resin miniature with parts to assemble as either a Chronus or Tethys Behemoth.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

Please note that Behemoths are massive kits, and advanced modelling projects. Extra care, attention, and hobby skills will be required to assemble and paint them. Because of that, this kit it is only recommended for advanced modellers. Some parts will need heating and bending to fit perfectly straight and slight gaps might need filling.

Scourge Behemoths are enormous, tentacled monstrosities, reckoned by many to be the most terrifying thing a soldier can face on the battlefield. Each of the Behemoth’s tentacles splay into smaller and smaller filaments which can extend to considerable length, reaching into buildings and plucking out unfortunate soldiers hiding within.

The Scourge Behemoth is a true spectacle of a kit. Behemoths are the largest Dropzone Commander models you can get, and are incredibly impressive models.

Able to be built as either a Tyrant or Dictator pattern, this kit contains 48 total parts, with plenty of options for the two variants. The tentacles are fully poseable for

maximum customisation.

The Scourge Behemoth comes complete with various weapons. With no small guns in sight, it relies on its Seeker Lashes to deal with infantry and light vehicles. The Tyrant is fitted out with some classic Scourge weaponry, albeit on a much larger scale. Four individual Heavy Plasma Cannons increase both the range and damage of their smaller cousins, while the strange Bio-Cannon bathes an entire area, melting anyone that stays there for too long.

The Dictator’s arms are instead loaded with the Static Accelerators - strange weapons that can tear through even the thickest armour, increasing their potency at closer ranges. Its Arc Maw is a terrifying perversion of arc technology, grounding its bursts in nearby targets, causing a chain reaction of energy to leap around the battlefield until stopped by the heaviest armour.

Contains 1 multi-part resin miniature with parts to assemble as either a Tyrant or Dictator Behemoth.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled. Any miniatures or scenery are shown for scale only and not included.

Please note that Behemoths are massive kits, and advanced modelling projects. Extra care, attention, and hobby skills will be required to assemble and paint them. Because of that, this kit it is only recommended for advanced modellers. Some parts will need heating and bending to fit perfectly straight and slight gaps might need filling.

Monuments to what, columns?

Anyone who plays an army of Egyptian undead zombie robots (you know the ones we mean) will always be on the lookout for appropriately themed scenery. Well, look no further! The Tomb World Monuments set contains an assortment of pillars and buttresses with which to adorn your battlefield. Made in the same style as our Tomb World bases, you could even chop them up to decorate your larger bases.

This set contains 2 large tapered pillars, 2 thin pillars, 2 buttresses, 2 tomb crystals, and 2 small plinths. You can stack them all up in pairs, or split them up to decorate more of your board.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

Stack em up and stack em tall.

Anyone who plays an army of Egyptian undead zombie robots (you know the ones we mean) will always be on the lookout for appropriately themed scenery. Well, look no further! The Tomb World Pillars set contains some thick and chunky pillars with which to adorn your battlefield. Made in the same style as our Tomb World bases, you could even chop them up to decorate your larger bases.

This set contains 2 large pillars, 2 two tapered thin pillars, and 2 large bases. You can stack them all up in pairs, or split them up to decorate more of your board.

Resin miniatures supplied unpainted and unassembled. This kit will require cleaning and assembly, and could need some small holes filled.

They say knowing is half the battle and with the Academy Building you can know twice as much in half the time! Featuring patented direct to brain learning you can download entire textbooks into your mind with only a fraction of the time, effort, and danger of traditional learning methods. With only a 4.26% chance of fatality, now is the time to learn something new! Finance options available.

Featuring acrylic walkways and multiple levels, this building is the perfect for a heavily contested objective. With an absurd amount of roof space and access points there's plenty of room for infantry bases all over this building.

10mm scale. Made from 3mm MDF and 1mm greyboard, the kit is designed for games of Dropzone Commander, but will work perfectly with any similar scale games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

Now a shell of its former self the Administratum Decimus is a stark reminder that war cares not for bureaucracy. Once an imposing building the Administratum stands crumbling in the face of giant war machines, legions of tanks, and countless genetically engineered super soldiers. In it's prime this building managed to house over 700 staff and was able to approve a whopping 3 planning approvals, 2 material transfers, and calculate tithes for a planet of over 12 billion people.

The Administratum Decimus is a great building to hide your war machines behind, standing almost 13cm high and 14cm square it provides great cover for your games of Dropzone Commander or Adeptus Titanicus.

Made from 3mm MDF and 1mm greyboard, this kit is perfect for games of Adeptus Titanicus, but will work perfectly with any similar scale games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

The Adnet Apartments are made from 3mm MDF and 1mm greyboard. It is easy to put together and looks great on the tabletop. Great scenery to use with Epic and Dropzone Commander, or other 10mm wargames. Model supplied unpainted and will require assembly. We advise using PVA glue for the best results.

Snipe from the roofs, hide round the corners, just don't fall off the bridge.

The Alphabet Tenements are an excellent way at bulking out the scenery on your board. They make brilliant buildings to block line of sight and occupy. The buildings themselves require no glue to put together, only the roof access pieces need sticking together. That means that you can flat pack them down after each game.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone Commander and will work perfectly with other 10mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Some say the Ashford Pressureworks looks like a big drum, and they'd be right. Inside however is the most advanced pressure alteration system known to man.

The Ashford Pressureworks contains 1 large pressure building and 1 small relay hub. The smaller building is great for a small objective room, with entrances on either side and plenty of space on top for troops. The large pressure building is a bit precarious perched on those pipe-like legs, but provides great line of sight blocking for aircraft while still letting tanks freely roll underneath it.

Ashford Pressureworks are made from 3mm MDF. Designed for Dropzone Commander, they'll work perfectly well in any other 10mm sci-fi wargame.

Model supplied unpainted and requires assembly. Some kits will need cutting and sanding for a perfect fit - always dry fit your models first for best results. We advise using PVA glue for assembling. Any miniatures are for scale only and not included.

Are you looking for some prime Earth real-estate? Maybe something inner city, right next to the Scourge people farm? Look no further than the Brownstone Rows!

With simple construction, and a whole lot of bang for your buck, the Brownstone Rows give a fantastic way to bulk out a board with buildings. These kits don't even need glue to put together (with the exception of the roof vents), meaning they can be slotted together in seconds and then taken apart for flat storage.

This kit comes with four Brownstone Rows, each of which has a unique design. Standing at 6cm high and 13cm long, they're perfect small buildings.

Made from 3mm MDF, the kit is designed for games of Dropzone Commander, but will work perfectly with any similar scale games.

A true marvel of engineering, the very fact that the Chrysar Building is still standing in the 27th Century is a testament to its construction. Also that no alien races have knocked it down yet!

One of the tallest buildings we've produced for 10mm games, the Chrysar Building stands at approximately 46cm tall, making it perfect for 10mm scale gaming. Made from 3mm MDF and 1mm greyboard, the kit is designed for games of Dropzone Commander, but will work perfectly with any similar scale games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

These Accessories are perfect for filling in those little gaps on your board. They are specificly designed for Dropzone at a 10mm Scale, however would work perfectly with other similar scaled table top games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

Civitalis pattern buildings can be found all over the galaxy where there's been a human presence. One of the most standardised designs available to mankind the origins of the pattern are lost to time, some say that humanity has always had the knowledge to build these buildings while others state, quite clearly that there's no evidence of these buildings existing before the 2nd millennium.

Even war torn futures need somewhere to buy commodities, like combat knifes, relic toasters, or holy maintenance oils for your bed springs. While that may not be much of an issue to those piloting war machines that tower over buildings, its nice to know that even if your planet is getting invaded, virus bombed or its just another Thursday afternoon there's always a bottle of non-person powered dairy substitute waiting for you.

With a set of billboards and rooftop walkways the Commercia Civitalis provides great areas for your more modest war machines to take cover from the bigger, angrier war machines that want to stomp them into the dirt. Easy to assemble, even without glue, you'll be able to get a table built in no time!

Made from 3mm MDF this kit is perfect for games of Adeptus Titanicus, but will work perfectly with any similar scale games.

Model supplied unpainted and requires assembly. We advise using PVA glue for the best results.

This compound was once a well kept, prosperous facility. Now largely forgotten the reconquest has taken interest in reclaiming its lost secrets.

A Compound Alenko makes for a great addition to any 10mm scale board. Its interconnected structures can give cover to troops, or leave the tiniest sliver of sight through for a lucky pot-shot.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone Commander and will work perfectly with other 10mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

There's something in those silos, lieutenant we just need to break in to find it! Why else would they have a processing plant attached to them?

A Compound Benezia is a great way to help fill out a board of 10mm industrial terrain. It's two connected sections provide line of sight blocking for both ground and air based units. The gantries between both splits the garrison into two and provides space underneath to hide units from either side. Or to just drive your tanks through.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone Commander and will work perfectly with other 10mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included

Sir, I don't think those silos are full of water, jellies would have taken it all by now. Looks pretty hazardous if you ask me.

A Compound Chakwas is an imposing structure, at least as far as 10mm scale goes. This structure makes for a great solid centrepiece for your board. Unmistakably industrial and build to contain some pretty dangerous compounds, your units -should- be safe from enemy fire behind it.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone Commander and will work perfectly with other 10mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

A common site early on in the settlement process, these old FOB's often get repurposed for industrial control and storage.

A single Compound Drack contains enough buildings to comfortably house a small security detachment early in a settlements development. On the tabletop a Compound Drack gives you 4 buildings to move around and make some great looking boards with.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone Commander and will work perfectly with other 10mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

What kind of manufacturing plant needs a high security watchtower? What did they even make here?

If you need a large and imposing industrial building for your 10mm scaled games, then the Compound Eve has exactly what you need. It's large footprint makes it a great focal point and objective building, and lots of roof space is always a plus. This kit also includes a watchtower, to keep an eye on the surroundings and make sure no one unauthorized gets to access the factory proper.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone Commander and will work perfectly with other 10mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Shame the scourge invaded, before this one could be finished.

The Construction Site are an excellent way at bulking out the scenery on your board. They make brilliant buildings to block line of sight and occupy. The buildings themselves require no glue to put together, only the roof access pieces need sticking together. That means that you can flat pack them down after each game.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone Commander and will work perfectly with other 10mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.

Completely different to Exhaust Towers, cooling towers are usually used to lower the temperature of something.

What industrial area would be complete without cooling towers, billowing out harmful, toxic Dihydrogen Monoxide. This pair of towers connected by a winding walkway is a great line of sight break for ground units, and some cover for carefully flown aerial units.

This kit is made from 3mm MDF. It is a great piece of scenery to use on the tabletop for Dropzone Commander and will work perfectly with other 10mm games.

Kit supplied unpainted and requires assembly. We advise using PVA glue for the best results. Any miniatures are for scale only and not included.